V i s hay I n t e rt e c h n o l o g y, I n c . AND TEC O L OGY INNOVAT I N HN Multilayer Ceramic Chip Capacitors HVArc Guard O 19 62-2012 Capacitors - Prevent Surface Arc-Over HVArc Guard® High-Voltage, Surface-Mount Multilayer Ceramic Chip Capacitors Key Benefits • Average voltage breakdown (VBD) is typically twice that of standard commercial grade products • Offer capacitance ranges of 10 pF to 0.27 µF • High capacitance and small case sizes save board space (compared to standard high-voltage MLCCs) • Excellent reliability and high-voltage performance: rated for 250 VDC to 2500 VDC • Eliminate the need to encapsulate capacitors with a conformal coating • Replaces wire-leaded, through-hole capacitors • Available with polymer terminations APPLICATIONS • • • • • • Medical equipment and instrumentation Electronic transmissions DC electric motors High-voltage generators S/B lighting ballasts for compact florescent lighting and HID Power supplies Resources • Datasheet: HVArc Guard® - http://www.vishay.com/doc?45197 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 Note (1) 1206 case size, X7R dielectric, 33 nF, 500 VDC rated HVArc Guard® vs. commercial grade capacitor when tested in air, not covered in fluid or conformal coated. One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0069-1205 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FEATURES For this Worldwide Patented Technology • Specialty: High-voltage applications • MLCC that protects against surface arc-over • Excellent high-voltage performance • Higher capacitances and smaller case sizes that save board space, as compared to standard high-voltage MLCCs • Voltage breakdowns as much as twice that of competitors’ products • Available with polymer termination for increase resistance to board flex cracking. Please contact factory for availability • Wet build process • Reliable Noble Metal Electrode (NME) system • Compliant to RoHS Directive 2011/65/EU • Halogen-free according to IEC 61249-2-2 definition V i s hay I n t e rt e c h n o l o g y, I n c . AND TEC O L OGY INNOVAT I N HN Multilayer Ceramic Chip Capacitors HVArc Guard ® O 19 62-2012 Surface-Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications Surface Mount Multilayer Cerami APPLICATIONS • • • • X7R GENERAL SPECIFICATION GENERAL SPECIFICATION Note Electrical characteristics at + 25 °C unless otherwise specified Note Electrical characteristics at + 25 °C unless otherwise specified Operating Temperature: - 55 °C to + 125 °C Operating Temperature: - 55 °C to + 125 °C Capacitance Range: 10 pF to 8.2 nF Capacitance Range: 220 pF to 270 nF Voltage Range: 1000 VDC to 2500 VDC Voltage Range: 250 VDC to 1000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C Temperature Coefficient of Capacitance (TCC): ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values ≤ 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipation Factor (DF): 2.5 % maximum at 1.0 VRMS and 1 kHz APPLICA Dielectric Strength Test: Performed per method 103 of EIA 198-2-E. Applied test voltages 200 % of rated voltage ELECTRICAL SPECIFICATIONS ≤ 250 VDC-rated: 500 VDC-rated: min. 150 % of rated voltage 120 % of rated voltage® C0G (NP0) 630 VDC, 1000 VDC-rated: VJ HVArc Guard Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE Document Number: 45197 MAXIMUM1VOLTAGE CASE For technical questions, (V) contact: [email protected] MINIMUM MAXIMUM THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 0 805 1 5 00 10 pF 390 pF Revision: 22-Feb-12 DIELECTRIC 1 206 1500 10 pF 1.5 nF 1 210 1500 10 pF 2.7 nF 2 220 1 5 00 47 0 pF 5.6 nF 2 225 2500 470 pF 8.2 nF 0 805 1000 470 pF 3.3 nF 1 206 1000 220 pF 47 n F 1 210 1000 220 pF 82 n F 1 808 1 0 00 220 pF 100 nF 1 812 1000 220 pF 270 nF Power s DC/DC c Voltage For light mlcc@vi X7R GENERA Note Electrical characteristics at + 25 °C unless otherwise specified Note Electrical Operating Temperature: - 55 °C to + 125 °C Operatin Capacitance Range: 10 pF to 8.2 nF Capacita Voltage Range: 1000 VDC to 2500 VDC Voltage Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C Tempera ± 15 % f Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values ≤ 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipat 2.5 % m Aging Rate: 0 % maximum per decade Dielectric Strength Test: Performed per method 103 of EIA 198-2-E Applied test voltages 1000 VDC-rated: 150 % of rated voltage 1500 VDC, 2500 VDC-rated: 120 % of rated voltage Insulatin At + 25 ° At + 125 Aging R Dielectr Performe Applied t ≤ 250 VD 500 VDC630 VDC, (4) VJ0805 A 101 J X CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION 0805 1206 1210 1808 1812 2220 2225 A = C0G (NP0) Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples 102 = 1000 pF 223 = 22 000 pF J=±5% K = ± 10 % M = ± 20 % X = Ni barrier 100 % tin plated F, E = AgPd (3) B = Polymer 100 % tin plated matte finish (4) N= Non-magnetic A C 5Z (2) MARKING PACKAGING PROCESS CODE G DC VOLTAGE RATING (1) P = 250 V E = 500 V L = 630 V G = 1000 V R = 1500 V O = 2500 V A= Unmarked Revision: 22-Feb-12 1 For technical questions, contact: mlcc@v THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUC ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 5Z = HVArc Guard® C = 7" reel/paper tape T = 7" reel/plastic tape P = 11 1/4"/13" reel/ paper tape R = 11 1/4"/13" reel/ plastic tape O = 7" reel/flamed paper tape I = 11 1/4"/13" reel/flamed paper tape Note: “I” and “O” are used for “F”, “E”, “N” termination size 0805 Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: [email protected] (2) Process code with 2 digits has to be added (3) Termination code “E” is for conductive epoxy assembly (4) Please contact factory for polymer termination availability PRODUCT SHEET Revision: 22-Feb-12 • • • • GENERAL SPECIFICATION Insulating Resistance: At + 25 °C 100 000 MΩ min. or 1000 ΩF whichever is less At + 125 °C 10 000 MΩ min. or 100 ΩF whichever is less Note • Detail ratings see selection chart ORDERING INFORMATION For this W • Specialty • MLCC th • Excellen • Higher c that sav standard • Voltage br • Available board fle • Wet buil • Reliable • Complia • Halogen Aging Rate: 1 % maximum per decade Dielectric Strength Test: Performed per method 103 of EIA 198-2-E Applied test voltages 1000 VDC-rated: 150 % of rated voltage www.vishay.com 1500 VDC, 2500 VDC-rated: 120 % of rated voltage X7R Prohibit Surface Arc-Over in High-V Insulating Resistance: At + 25 °C 100 000 MΩ min. or 1000 ΩF whichever is less At + 125 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging Rate: 0 % maximum per decade C0G (NP0) www.vishay.com FEATUR C0G (NP0) Insulating Resistance: At + 25 °C 100 000 MΩ min. or 1000 ΩF whichever is less At + 125 °C 10 000 MΩ min. or 100 ΩF whichever is less Revision 22-Feb-12 Capacitors - Prevent Surface Arc-Over ELECTRICAL SPECIFICATIONS Power supplies DC/DC converters (buck and boost) Voltage multipliers for flyback converters For lighting and other AC applications please contact: [email protected] 2/2 2 VMN-PT0069-1205 Document Number: 45197 For technical questions, contact: [email protected] This documentTHIS is DOCUMENT subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000