V ishay I n tertech n o l o g y, I n c . Capacitors - High Q and Low ESR at High Frequency I INNOVAT AND TEC O L OGY VJ....W1BC High Q Dielectric N HN Multilayer Ceramic Chip Capacitors O 19 62-2012 Surface-Mount MLCC Capacitors for High Q Commodity Applications Key Benefits • • • • • • • Ultra-stable Class 1 dielectric High Q and low ESR at high frequency High capacitance per unit volume 100 % tin terminations Available in standard sizes: 0402, 0603 Compliant to RoHS Direction 2011/65/EU Halogen-free according to IEC 61249-2-21 definition APPLICATIONS • • • • Mobile telecommunications WLAN RF modules Tuners Resources • Datasheet: VJ....W1BC High-Q Dielectric - http://www.vishay.com/doc?28534 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0098-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n tertech n o l o g y, I n c . Capacitors - High Q and Low ESR at High Frequency www.vishay.com AND TEC I INNOVAT O L OGY VJ....W1BC High Q Dielectric VJ....W1BC High Q Dielectric N HN Multilayer Ceramic Chip Capacitors O 19 Vishay 62-2012 Surface Mount Multilayer Ceramic Chip Capacitors Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications VJ....W1BC High Q Dielectric for High Q Commodity Applications Vishay FEATURES www.vishay.com • Ultra stable class 1 dielectric • High Q and low ESR at high frequency • Four standard sizes SELECTION CHART • High capacitance per unit volume DIELECTRIC HIGH Q STYLE VJ0402 VJ0603 • Supplied in tape on reel SIZE CODE 0402 0603 • For high frequency applications VOLTAGE (VDC) 16 V 25 V 50 V 100 V 16 V 25 V 50 V 100 V • Ni-barrier with 100 % tin terminations VOLTAGE CODE J X A B J X A B CAP. CODE CAP. • Dry sheet manufacturing technology 0R5 0.5 pF N N S S S • Noble Metal Electrode system (NME) 1R0 1.0 pF N N S S S • Compliant to RoHS 1R2 1.2 pFDirective 2011/65/EU N N S S S 1R5 1.5 pF N definitionN S S S • Halogen-free according to IEC 61249-2-21 S 1R8 1.8 pF N N S S S 2R2 2.2 pF N N S S S class 1 dielectric APPLICATIONS .com 2R7 2.7 pF N N S S S www.vishay.com low ESR at high frequency • Mobile telecommunication 3R3 3.3 pF N N S S S 3R9 3.9 pF N N S S S ard sizes • WLAN 4R7 4.7 pF N N S S S itance per unit volume • RF modules 5.6 pF 5R6 N N S S S tape on reel 6R8 6.8 pF N N S S S • Tuner 8R2 8.2 pF N N S S S quency applications FEATURES 100 10 pF N N S S S ELECTRICAL SPECIFICATIONS ith 100 % tin terminations FEATURES 120 12 pF N N S S S • Ultra stable class 1 dielectric Note manufacturing technology 150 stable class 1 15 pF N N S S S • Ultra dielectric • High Q and low ESR at highatfrequency • Electrical characteristics 25 °C, 30 % to 70 % related humidity, 180 18 pF N N S S S l Electrode system (NME) • High Q and low ESR at high frequency otherwise • Four unless standard sizes specified 220 22 pF N N S S S o RoHS Directive 2011/65/EU • Four 270 standard sizes27 pF N N S S S • High capacitance per unit volume Operating Temperature: - 55 °C to + 125 °C Aging Rate: 0 % maximum per decade 330 33 pF N N S S S ee according to IEC 61249-2-21 definition • High capacitance per unit volume • Supplied in tape on reel 390 39 pF N N S S S Insulation Resistance (IR): after 120 s at UR (DC) Capacitance Range: 0.5 pF to 3300 pF • Supplied in tape on reel 470 47 pF N N S S S • For high frequency applications IONS ≥ 10 GΩ or R x C 56 ≥ 500 Ω x F whichever is less • For 560 high frequency applications pF N N S S S • Ni-barrier 100 16 % tin communication Voltagewith Range: VDCterminations to 100 VDC 680 68 tin pF terminations N N S S S • Ni-barrier with 100 % Dielectric Strength Test: • Dry sheet manufacturing technology 820 82 pF N N S S S Temperature Coefficient of Capacitance (TCC): • Dry sheet manufacturing technology This is the maximum the capacitors 101 100 pFvoltage N are tested N for S S S • Noble Metal Electrode system (NME) s ± 30 ppm/°C from - 55 °C to + 125 °C 1 s to 5 s period and the charge/discharge current does not 121 120 pF N N S S S • Noble Metal Electrode system (NME) • Compliant to RoHS Directive 2011/65/EU exceed 50 mA 150 pF 151 N N S S S • Compliant to RoHS Directive 2011/65/EU Dissipationaccording Factor: to IEC 61249-2-21 definition • Halogen-free ≤ 100 VDC: DWV at 181 180250 pF % of rated voltage N N S S S • Halogen-free according Cap. < 30 pF: Q ≥ 400 + 20 C 221 220 pFto IEC 61249-2-21 definition N N S S S Cap. ≥ 30 pF: Q ≥ 1000 271 270 pF N N N S S S APPLICATIONS APPLICATIONS 331 330 pF N N N S S S • Mobile telecommunication 391 390 pF N N N S S S • Mobile telecommunication Test Conditions for Capacitance and DF Measurement • WLAN 471 470 pF N N N S S S Cap. ≤ 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 MHz ± 10 % • WLAN 561 560 pF S S S 0 % maximum per decade • RFCap. modules > 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 kHz ± 10 % 681modules 680 pF S S S • RF www.vishay.com • Tuner 821 820 pF S S S esistance (IR): after 120 s at UR (DC) • Tuner 102 1000 pF S S S x C ≥ 500 Ω x F whichever is less ATIONS 122 1200 pF X X X ELECTRICAL SPECIFICATIONS QUICK REFERENCE DATA 152 1500 pF X X X rength Test: 182 1800 pF X X X Note for °C, 30 % voltage to 70 % related humidity, are tested aximum the capacitors CAPACITANCE 222 2200 pF X X X MAXIMUM VOLTAGE Electrical od and the charge/discharge current •does not characteristics at 25 °C, 30 % to 70 % related humidity, DIELECTRIC CASE 272 2700 pF X X X unless otherwise specified (V) MINIMUM MAXIMUM 332 3300 pF X X X Aging Rate: 0 % maximum per decade 5A °C to + 125 °C WV at 250 % of rated voltage Operating Temperature: - 55 °C to + 125 °C Aging 472 Rate: 0 % maximum 4700 pF per decade 0402 50 0.5 pF 470 pF 562 5600 pF Insulation Resistance (IR): after 120 s at UR (DC) o 3300 pF High Capacitance 0.5 3300 pF is less Insulation Resistance (IR): 682 Q 6800 pF after 120 s at UR (DC) ≥ 10 GΩ or R xRange: C ≥ 500 Ω pF x Fto whichever 0603 100 0.5 pF 3.3 nF 822 8200 pF ≥ 10 GΩ or R x C ≥ 500 Ω x F whichever is less 0V .W1BC High Q Dielectric Vishay Chip Capacitors plications VJ....W1BC High Q Dielectric VJ....W1BC High Q Dielectric Vishay Mount Multilayer Ceramic Chip Capacitors Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications for High Q Commodity Applications DC Vishay VJ....W1BC High Q Dielectric Vishay ance and DF Measurement 2 VRMS, 1 MHz ± 10 % 2 VRMS, 1 kHz ± 10 % Revision 17-Feb-12 Capacitance (TCC): + 125 °C 103 10 000 pF Voltage Range: 16 VTest: Revision: 17-Feb-12 Document Number: 28534 Dielectric Strength DC to 100 VDC 1Note Note Dielectric Strength Test: This is the maximum voltage the capacitorsFor aretechnical tested questions, for contact: • [email protected] ratings see selection chart Temperature Coefficient of Capacitance (TCC): • Letters indicate product thickness, see packaging quantities This is the maximum voltage the capacitors tested for 1 s to 5 s THIS period and the charge/discharge current WITHOUT does not NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THISare DOCUMENT IS SUBJECT TO CHANGE DOCUMENT ± 30 ppm/°C + 125 °C TO SPECIFIC DISCLAIMERS,1SET ARE SUBJECT AT www.vishay.com/doc?91000 s toFORTH 5 s period and the charge/discharge current does not exceed 50 mAfrom - 55 °C to exceed 50 mA ≤ 100 VDC: DWV at 250 % of rated voltage 17-Feb-12 Document Number: 28534 ORDERING Dissipation Factor: 3 ≤Revision: 100 VDC : DWV INFORMATION at 250 % of rated voltage For technical [email protected] Cap. < 30 pF: Q ≥ 400 + 20 C VJ0402 Q 101 F questions, contact: X J C W1BC THISDIELECTRIC DOCUMENT ISCAPACITANCE SUBJECT TO CHANGETOLERANCE WITHOUT NOTICE. TERMINATION THE PRODUCTSVOLTAGE DESCRIBEDPACKAGING HEREIN AND THIS DOCUMENT Cap. ≥ 30 pF: Q ≥ 1000 SIZE PROCESS CODE FOR ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CODE Test Conditions for Capacitance and DF Measurement Cap. ≤ 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 MHz ± 10 % Cap. > 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 kHz ± 10 % 0402 0603 Q = High Q Document Number: 28534 ay.com DESCRIBED HEREIN AND THIS DOCUMENT ww.vishay.com/doc?91000 Two significant Cap. value ≤ 5 pF digits followed by B = ± 0.10 pF the number of C = ± 0.25 pF zeros: 5 pF > Cap. value < 10 pF 1R0 = 1.0 pF C = ± 0.25 pF 101 = 100 pF D = ± 0.50 pF Cap. value ≥ 10 pF F=±1% G=±2% J=±5% X = Ni barrier 100 % tin termination J = 16 V X = 25 V A = 50 V B = 100 V BASIC COMMODITY C = 7" reel/ paper P = 13" reel/ paper DIMENSIONS in inches (millimeters) 1 Revision: 17-Feb-12 For technical questions, contact: [email protected] Document Number: 28534 SIZE L DocumentCODE Number: 28534 1 ForDOCUMENT technical questions, contact: [email protected] ECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS 0402 0.040 ± 0.002 BJECT TO SPECIFIC DISCLAIMERS, SET FORTH ATDOCUMENT www.vishay.com/doc?91000 THIS IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN ANDWTHIS DOCUMENT T (1005) (1.00 ± 0.05) ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MB MB L PRODUCT SHEET 2/2 0603 (1608) 0.063 + 0.006/- 0.004 (1.60 + 0.15/- 0.10) W T MAX. MB 0.020 ± 0.002 (0.50 ± 0.05) 0.022 (0.55) 0.010 + 0.002/- 0.004 (0.25 + 0.05/- 0.10) 0.030 + 0.006/- 0.004 (0.80 + 0.15/- 0.10) 0.038 (0.95) 0.016 ± 0.006 (0.40 ± 0.15) VMN-PT0098-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000