Product Sheet

V I S H AY I N T E R T E C H N O L O G Y, I N C .
MULTILAYER CERAMIC CHIP CAPACITORS
VJ....31X RoHS Automotive MLCC
Surface-Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
KEY BENEFITS
•
•
•
•
•
AEC-Q200 qualified with PPAP available
High operating temperature up to +150 °C
Available in 0402 to 1812 body size
Made with wet build process and reliable Noble Metal Electrode (NME) system
Polymer (flexible) termination with 100 % matte tin plate finish
APPLICATIONS
• Automotive
–– Engine and steering ECU, sensors, headlight control, battery and power management
• Industrial
–– Sensors, power supplies, high-reliability control units, board-flex sensitive modules
RESOURCES
• Datasheet: VJ....31X RoHS Automotive MLCC - www.vishay.com/doc?45226
• For technical questions contact [email protected]
• Material categorization: for definitions, please see www.vishay.com/doc?99912
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT0440-1501
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
• AEC-Q200 qualified with PPAP available
• Available in 0402 to 1812 body size
V I S H AY I N T E R T E C H N O L O G Y, I N C .
• High operating temperature
• Wet build process
• Reliable Noble Metal Electrode
(NME)CAPACITORS
system
MULTILAYER CERAMIC
CHIP
• Parts compliant with ELV directive
VJ....31X
RoHSfor Automotive
• Material categorization:
definitions of compliance MLCC
please see www.vishay.com/doc?99912
Surface-Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
For more than 25 years Vishay Vitramon has supported the automotive industry with robust, highly reliable MLCCs that have
made it a leader in this segment. All Vishay Vitramon MLCCs are manufactured in “Precious Metal Technology” (PMT / NME)
and a wet build process. They are qualified according to AEC-Q200 with PPAP available on request. Applications for these
devices include automotive “under the hood”, safety and comfort electronics. Their termination finish is 100 % matte tin plate
finish. A polymer (flexible) termination with 100 % matte tin plate finish is offered for boardflex sensitive applications.
C0G (NP0) DIELECTRIC
X7R, X8R DIELECTRIC

GENERAL SPECIFICATION

Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +150 °C 
(above +125 °C changed characteristics, see 2.2)
Operating Temperature: -55 °C to +150 °C 
(X7R above +125 °C changed characteristics, see 2.2)
Capacitance Range: 1 pF to 22 nF
Capacitance Range: 120 pF to 1.0 μF
Voltage Range: 25 VDC to 3000 VDC
Voltage Range: 16 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
X8R: ± 15 % from -55 °C to +150 °C, with 0 VDC applied
GENERAL SPECIFICATION
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and 
1 kHz for values > 1000 pF
Dissipation Factor (DF):
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz 
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Revision 23-Oct-14
Aging: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
200 % of rated voltage
150 % of rated voltage
630 VDC, 1000 VDC-rated:
3000 VDC-rated:
120 % of rated voltage


RANGE OVERVIEW
Revision: 23-Oct-14
VOLTAGE
CASE CODE
CAPACITANCE
Document Number: 45226
1
MINIMUM
MAXIMUM
MINIMUM
MAXIMUM
For technical questions, contact: [email protected]
0402 TO CHANGE WITHOUT
25 VDC NOTICE. THE PRODUCTS
100 VDC DESCRIBED1,0
pF AND THIS DOCUMENT
220 pF
THIS DOCUMENT IS SUBJECT
HEREIN
ARE SUBJECT
DISCLAIMERS,
SET FORTH
0603 TO SPECIFIC50
V
200 VAT www.vishay.com/doc?91000
1,0 pF
1 nF
DC
C0G (NP0)
X7R
X8R
0805
1206
1210
1812
0402
0603
0805
1206
1210
1812
0402
0603
0805
1206
1210
50
50
50
50
16
16
16
16
16
50
25
25
25
25
25
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
DC
500 VDC
630 VDC
630 VDC
3000 VDC
100 VDC
200 VDC
250 VDC
1000 VDC
630 VDC
630 VDC
100 VDC
100 VDC
100 VDC
50 VDC
50 VDC
1,0 pF
1,0 pF
100 pF
12 pF
120 pF
330 pF
330 pF
220 pF
390 pF
10 nF
330 pF
470 pF
470 pF
1,0 nF
10 nF
3,9 nF
10 nF
12 nF
22 nF
47 nF
150 nF
470 nF
1,0 µF
1,0 µF
1,0 µF
6,8 nF
33 nF
100 nF
220 nF
220 nF
Detail ratings see “Selection Charts”, datasheet : http://www.vishay.com/doc?45226
PRODUCT SHEET
2/2
VMN-PT0440-1501
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000