CHP, HCHP www.vishay.com Vishay Sfernice High Stability Resistor Chips (< 0.25 % at Pn at 70 °C during 1000 h) Thick Film Technology FEATURES • CHP: Standard passivated version for industrial, professional and military applications Available • Robust terminations • Large ohmic value range 0.1 to 100 M Available • Tight tolerance to 0.5 % • HCHP: For high frequency applications • ESCC approved see CHPHR Vishay Sfernice thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability < 0.25 % at Pn at + 70 °C during 1000 h, homogeneity, reproducibility and quality. They conform to specifications NFC 83-240 and MIL-R-55342 D. Evaluated to ESCC 4001/026 (see CHPHR datasheet). Sputtered Thin Film terminations, with nickel barrier, are very convenient for high operating conditions. They can withstand thousands of very severe thermal shocks. B (W/A), N (W/A), and F (one face) types are for solder reflow assembly. G (W/A) and W (one face) types are for wire bonding, gluing and even high temperature solder reflow. • High temperature (245 °C) see CHPHT • SMD wraparound chip resistor • Halogen-free according to IEC 61249-2-21 definition • Withstand moisture resistance test of AEC-Q200 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RATED POWER Pn W LIMITING ELEMENT VOLTAGE V TEMPERATURE UNIT MAX. OVERLOAD RESISTANCE TOLERANCE COEFFICIENT WEIGHT VOLTAGE RANGE (1) ±% ± ppm/°C V mg CHP0502 0502 0.050 50 100 0.1 to 25M 0.5, 1, 2, 5 100, 200 HCHP0502 CHP0505 0505 0.125 50 100 0.1 to 10M 0.5, 1, 2, 5 100, 200 HCHP0505 CHP0603 0603 0.125 50 100 0.1 to 25M 0.5, 1, 2, 5 100, 200 HCHP0603 (2) CHP0805 0805 0.200 150 300 0.1 to 25M 0.5, 1, 2, 5 100, 200 HCHP0805 CHP1005 1005 0.250 150 300 0.1 to 50M 0.5, 1, 2, 5 100, 200 HCHP1005 CHP1206 1206 0.250 200 400 0.1 to 50M 0.5, 1, 2, 5 100, 200 HCHP1206 CHP1505 1505 0.500 200 400 0.1 to 75M 0.5, 1, 2, 5 100, 200 HCHP1505 CHP2010 2010 1.000 (3) 200 400 0.1 to 100M 0.5, 1, 2, 5 100, 200 HCHP2010 CHP1020 1020 1.000 (3) 200 400 0.1 to 10M 0.5, 1, 2, 5 100, 200 HCHP1020 CHP2208 2208 0.750 200 400 0.1 to 100M 0.5, 1, 2, 5 100, 200 HCHP2208 CHP2512 2512 2.000 (3) 250 500 0.1 to 100M 0.5, 1, 2, 5 100, 200 CHP2512 CHP1010 1010 0.500 200 400 0.1 to 25M 0.5, 1, 2, 5 100, 200 CHP1010 Notes (1) Shall be read in conjunction with other tables. (2) Model CHP0805 being same size than case 0705 with same performances, only codification of CHP0805 remains. (3) With special assembly care. Revision: 19-May-14 1 3 2 4 5 8 8 26 25 21 42 12 Document Number: 52023 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHP, HCHP www.vishay.com Vishay Sfernice DIMENSIONS in millimeters (inches) A A D D D D C E E CASE SIZE B C A B C D/E VALUE TOL. VALUE TOL. VALUE TOL. VALUE TOL. 0502 1.27 (0.050) 0.152 (0.006) 0.60 (0.024) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 0505 1.27 (0.050) 0.152 (0.006) 1.27 (0.050) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 0603 1.52 (0.060) 0.152 (0.006) 0.85 (0.033) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 0805 1.91 (0.075) 0.152 (0.006) 1.27 (0.050) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1005 2.54 (0.100) 0.152 (0.006) 1.27 (0.050) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1206 3.05 (0.120) 0.152 (0.006) 1.70(0.067) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1505 3.81 (0.150) 0.152 (0.006) 1.32 (0.052) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 2010 5.08 (0.200) 0.152 (0.006) 2.54 (0.100) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1020 2.54 (0.100) 0.152 (0.006) 5.08 (0.200) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 2208 5.58 (0.220) 0.152 (0.006) 2.00 (0.079) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 2512 6.35 (0.250) 0.152 (0.006) 3.30 (0.130) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1010 2.54 (0.100) 0.152 (0.006) 2.54 (0.100) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) SUGGESTED LAND PATTERN (to IPC-7351A) Gmin. Xmax. Zmax. CASE SIZE DIMENSION IN MM (INCHES) ZMAX. GMIN. XMAX. 0502 1.82 (0.072) 0.10 (0.004) 0.73 (0.029) 0505 1.82 (0.072) 0.10 (0.004) 1.40 (0.055) 0603 2.37 (0.093) 0.35 (0.014) 0.98 (0.038) 0805 2.76 (0.109) 0.74 (0.029) 1.40 (0.055) 1005 3.39 (0.134) 1.37 (0.054) 1.40 (0.055) 1206 3.90 (0.154) 1.88 (0.074) 1.73 (0.068) 1505 4.66 (0.184) 2.64 (0.104) 1.45 (0.057) 2010 5.93 (0.234) 3.91 (0.154) 2.67 (0.105) 1020 3.39 (0.134) 1.37 (0.054) 5.21 (0.205) 2208 6.43 (0.253) 4.41 (0.174) 2.04 (0.080) 2512 7.20 (0.284) 5.18 (0.204) 3.19 (0.125) 1010 3.39 (0.134) 1.37 (0.054) 2.67 (0.105) Revision: 19-May-14 Document Number: 52023 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHP, HCHP www.vishay.com Vishay Sfernice Substrate Technology Alumina Thick film (ruthenium oxyde) Protection Terminations Epoxy coating B (W/A): SnPb over nickel barrier for solder reflow N (W/A): SnAg over nickel barrier for solder reflow F (Flip Chip): SnAg over nickel barrier for solder reflow W (one face) and G (W/A) type: Gold over nickel barrier for other applications Note • Refer to Application Note “Guidelines for Vishay Sfernice Resistive and Inductive Components” (document number: 52029) for recommended reflow profile. Profile #3 applies. Rated Power (%) POWER DERATING CURVE MECHANICAL SPECIFICATIONS 100 80 60 40 20 0 0 20 Note • For temperature up to 215 °C please consult Vishay Sfernice BEST TOL. AND TCR VS. OHMIC VALUE (1) TIGHTEST TOLERANCE (%) BEST TCR (ppm/°C) 10 < R < 5M 0.5 % (D) 100 (K) OHMIC VALUE RANGE in 5 < R < 10M 1 % (F) 100 (K) 1 < R < Rmax. 2 % (G) 200 (L) 0.1 < R < Rmax. 5 % (J) 200 (L) 100 120 140 155 PACKAGING ESD packaging available: Waffle pack and plastic tape and reel (low conductivity). Paper tapes available on request (ESD only). SIZE - 55 °C; + 155 °C 60 70 80 Ambient Temperature in °C CLIMATIC SPECIFICATIONS Operating temperature range 40 0502 0505 0603 0805 1005 1206 1505 2010 1010 2208 1020 2512 MOQ NUMBER OF PIECES PER WAFFLE TAPE AND PACK MIN. MAX. 400 4000 100 TAPE WIDTH 5000 8 mm 100 221 140 60 100 60 60 50 4000 100 2000 2500 4000 1000 2000 8 mm 8 mm 8 mm 8 mm 8 mm Note (1) Improved performance on request PACKAGING RULES CHIPS FOR HIGH FREQUENCY APPLICATIONS Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. The HF performance of flip chip and W/A types can be improved on request. Please ask for HCHP Waffle Pack To get “not stacked up” waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult Vishay Sfernice for specific ordering code Tape and Reel See Part Numbering information to get the quantity desired by tape. Revision: 19-May-14 Document Number: 52023 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHP, HCHP www.vishay.com Vishay Sfernice TYPICAL HF PERFORMANCE OF HCHP 2.0 2.0 1Ω 1.8 1.6 1.6 10 Ω 10 Ω 1.4 1.4 1.2 1.2 100 Ω 1.0 |Z|/R |Z|/R 1Ω 1.8 200 Ω 0.8 100 Ω 1.0 200 Ω 1 kΩ 0.8 0.6 0.6 1 kΩ 0.4 1 MΩ 0.2 100 kΩ 10 kΩ 0.4 10 kΩ 1 MΩ 0.2 100 kΩ 0 0 1 10 100 1000 Size 0603 (W/A) 1 10 000 10 100 Size 0603 (Flip chip) f (MHz) 1000 10 000 f (MHz) POPULAR OPTIONS For any option it is recommended to consult Vishay Sfernice for availability first. Option: Enlarged terminations: 0063 For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heat sinks (see application note: 53048 Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA Arrays, CHP Thick Film) www.vishay.com/doc?53048. Option to order: 0063 (applies to size 1206/1505/1020/2010/2512). DIMENSIONS (Option 0063) in millimeters Bottom view for mounting Uncoated ceramic Enlarged termination C E D B A A B C D E ± 0.152 ± 0.127 ± 0.127 ± 0.127 ± 0.127 1206 3.00 1.73 0.38 0.40 1.19 1505 3.70 1.25 0.50 0.50 1.54 2010 5.03 2.64 0.50 0.50 2.20 1020 2.49 5.18 0.50 0.31 0.93 2208 5.53 2.05 0.50 0.50 2.45 2512 6.30 3.30 0.50 0.50 2.84 CASE SIZE Revision: 19-May-14 Document Number: 52023 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHP, HCHP www.vishay.com Vishay Sfernice SUGGESTED LAND PATTERN (Option 0063) Gmin. Xmax. Zmax. DIMENSIONS (IN MILLIMETERS) CASE SIZE Zmax. Gmin. Xmax. 1206 3.85 0.50 1.86 1505 4.55 0.50 1.38 2010 5.88 0.50 2.77 1020 3.34 0.50 5.31 2208 6.38 0.50 2.18 2512 7.15 0.50 3.43 OPTION: MARKING Option to order 0013: Marking of ohmic value and tolerance: Sizes: 0805 to 1005: 3 digits marking (according to EIA-96) Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure) Tolerance indicated by a color dot. Option to order 0014: Marking of ohmic value: Sizes 0805 to 1005: 3 digits marking (according to EIA-96) Sizes 1206 to 2010: 4 digits marking (same codification than in the ordering procedure) No standard marking available for smaller sizes. A price adder will apply to the unit price of the parts for options 0013 and 0014. PERFORMANCE TESTS Termination adhesion Resistance to solder heat Rapid temperature change Climatic sequence CONDITIONS REQUIREMENTS TYPICAL VALUES AND DRIFTS 5N for 10 s ± (0.25 % + 0.05 ) < ± 0.1 % Immersion 10 s in Sn/Pb 60/40 at + 260 °C ± (0.25 % + 0.05 ) < ± 0.1 % ± (0.25 % + 0.05 ) < ± 0.1 % Phase A dry heat Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles ± (1 % + 0.05 ) < ± 0.2 % 5 cycles - 55 °C + 155 °C 56 days ± (1 % + 0.05 ) < ± 0.2 % Moisture resistance AEC-Q200 85 °C/85 % RH/Pn/10 1000 h 5 % + 0.05 Max. < 3 % + 0.05 Short time overload 6.25 Pr for 2 s ± (0.25 % + 0.05 ) < ± 0.1 % 1000 h at rated power 90’/30’ at + 70 °C 1000 h ± (1 % + 0.05 ) Humidity (steady state) Load life Revision: 19-May-14 1000 h < 0.25 % 2000 h < 0.5 % 10 000 h <1% Document Number: 52023 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHP, HCHP www.vishay.com Vishay Sfernice Permissible Pulse Power P (W) Maximum permissible pulse load Pi max. for single pulse (1) 100 10 1 0.1 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration t (s) CHP0402 CHP0603 CHP0805 CHP1206 CHP2010 CHP2512 Permissible Pulse Energy (J) Energy for single pulse (1) 100 10 1 0.1 0.01 0.001 0.0001 0.0001 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration t (s) CHP0402 CHP0603 CHP0805 CHP1206 CHP2010 CHP2512 Permissible Pulse Voltage (V) Maximum permissible pulse voltage Ui max. single pulse (1) 10 000 1000 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration t (s) CHP0402 CHP0603 CHP0805 CHP1206 CHP2010 CHP2512 Note (1) One should use the 3 curves together to get the right performances. Revision: 19-May-14 Document Number: 52023 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHP, HCHP www.vishay.com Vishay Sfernice Permissible Pulse Power P (W) Maximum permissible pulse load Pi max. 100 10 1 0.1 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration t (s) CHP0402 CHP0603 CHP0805 CHP1206 CHP2010 CHP2512 1.2/50 μs lightning surge Test Voltage (V) 10 000 1000 100 10 10 100 1000 10 000 100 000 Resistor Value (Ω) CHP0603 CHP0805 CHP1206 CHP2010 CHP2512 10/700 μs lightning surge Test Voltage (V) 10 000 1000 100 10 10 100 1000 10 000 100 000 Resistor Value (Ω) CHP0603 Revision: 19-May-14 CHP0805 CHP1206 CHP2010 CHP2512 Document Number: 52023 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHP, HCHP www.vishay.com Vishay Sfernice GLOBAL PART NUMBER INFORMATION LIMITED TO 18 DIGITS: If more digits are necessary a cofication of some digits might be necessary C H P GLOBAL MODEL CHP HCHP (3 or 4 digits) 0 8 0 5 K 1 0 0 1 F B T 9 9 9 SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING (1) OPTION 0502 0505 0603 0805 1005 1206 1505 2010 1020 1010 2208 2512 K = 100 ppm L = 200 ppm The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point D = ± 0.5 % F=±1% G=±2% J=±5% B: SnPb over nickel barrier N: SnAg over nickel barrier F: SnAg over nickel barrier (one face) G: Gold over nickel barrier W: Gold over nickel barrier (one face) For more information see Codification of Packaging table From 1 to 3 digits, leave blank if no option 10R0 = 10 3901 = 3900 1004 = 1 M Historical Part Number examples: CHP2010K50R0FBT100 CHP0805K33R0FG0045 HCHP0805K16R5FBT55 CHP2010L1006JN B: Lead bearing version N and G: Lead (Pb)-free/ RoHS version (tapes of 100 pieces) (CHP option 45) (HCHP option 55) (waffle pack) Notes • Historical part numbers are not recommended but can still be used for ordering. (1) For paper tape please consult Vishay Sfernice. CODIFICATION OF PACKAGING CODIFICATION OF OPTIONS ON TWO DIGITS WAFFLE PACK TD 1000 min., 1000 mult OPTION .. 0099 0100 0101 0102 0103 0104 0105 .. 0124 0125 TE 2500 min., 2500 mult CODIFICATION OF SIZES TF Full tape (quantity depending on size of chips) W 100 min., 1 mult WA 100 min., 100 mult (available only in size 1206) PLASTIC TAPE T 100 min., 1 mult TA 100 min., 100 mult TB 250 min., 250 mult TC 500 min., 500 mult PAPER TAPE PT 100 min., 1 mult PA 100 min., 100 mult PB 250 min., 250 mult PC 500 min., 500 mult PD 1000 min., 1000 mult PE 2500 min., 2500 mult PF Full tape (quantity depending on size of chips) Revision: 19-May-14 CODE 18 7 8 9 A B C D E F G H I J K L OPTION 2 DIGITS .. 99 0A 0B 0C 0D 0E 0F .. 0Y 0Z CODE 40 02016 0302 0402 0502 0505 0603 0805 1005 1010 1020 1206 1505 2010 2208 2512 OPTION 0126 0127 0128 .. 0320 0321 0322 0323 0324 0325 .. CODE 18 M N O P Q R S T U V W X Y Z OPTION 2 DIGITS 1A 1B 1C .. 8M 8N 8O 8P 8Q 8R .. CODE 40 22 33 44 55 515 48 408 816 914 073 074 100 135 182 Document Number: 52023 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000