AOZ6115 High Performance, Low RON, SPST Analog Switch General Description Features The AOZ6115 is a high performance single-pole single-throw (SPST), low power, TTL-compatible bus switch. ● SOT-23 5-Lead Package ● 1.65V to 5.5V VCC operation ● Low CON: 18pF The AOZ6115 can handle analog and digital signals. Signals with voltages up to VCC (1.65V to 5.5V) can be transmitted in either direction. When the Select pin is HIGH, A is connected to the output B pin. The path that is open will have a high-impedance state with respect to the output. Applications ● Audio and Video Signal Routing ● Battery Operated Equipment ● Communications Circuit ● Relay Replacement ● Power Routing Typical Application AOZ6115 IC + – Rev. 1.8 October 2009 www.aosmd.com Power Supply Page 1 of 9 AOZ6115 Ordering Information Part Number Ambient Temperature Range Package Environmental AOZ6115CI -40°C to +85°C SOT-23 5-Lead RoHS Compliant Green Product AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information. Pin Configuration B 1 A 2 GND 3 Truth Table 5 4 Logic S Input Function 0 No Connection 1 A Connected to B VCC S SOT23-5L (Top View) Rev. 1.8 October 2009 www.aosmd.com Page 2 of 9 AOZ6115 Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Symbol VCC VS Parameter Rating Supply Voltage -0.5V to + 6V (1) Switch Voltage -0.5V to VCC + 0.5V (1) VIN Input Voltage IIK Minimum Input Diode Current -50mA ISW Switch Current 130mA Peak Switch Current (Pulsed at 1ms, <10% Duty Cycle) 260mA ISWPEAK TSTG -0.5V to VCC Storage Temperature Range -65°C to 150°C PD SOT23-5 Power Dissipation at 85°C(2) 180mW ESD Human Body Model (JESD22A-114E) 8000V Notes: 1. Signals on A, or B or S exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. 2. All leads welded or soldered to PC Board. Rev. 1.8 October 2009 www.aosmd.com Page 3 of 9 AOZ6115 Electrical Characteristics (Continued) Unless otherwise indicated, specifications indicate a temperature range of -40°C to +85°C Symbol Parameter Test Conditions Min. Typ.(1) Max. Units DC CHARACTERISTICS VIH VIL RON Input Voltage High Input Voltage Low 1.5 VCC = 4.5V to 5.5V 2.0 V VCC = 2.7V to 3.6V 0.6 VCC = 4.5V to 5.5V 0.8 VCC = 2.7V, IOUT = 100mA, B = 1.5V 3.0 4.0 VCC = 4.5V, IOUT = 100mA, B = 3.5V 2.0 3.0 On Resistance Flatness VCC = 4.5V, IOUT = 100mA, B = 0V, 1V, 2V 0.8 Input Leakage Current VIN = 0V or VCC -1.0 IB(off) Off Stage Switch Leakage VCC = 5.5V, A = 1V, 4.5V, B = 4.5V, 1V -100 IA(on) On State Switch Leakage VCC = 5.5V, A = 1V, 4.5V, B = floating -20 RFLAT IIN On Resistance VCC = 2.7V to 3.6V V Ω Ω 1.0 µA 4 100 nA 1 20 nA 5.5 V POWER SUPPLY VCC Power Supply Range 1.65 ICCQ Quiescent Supply Current VCC = 5.5V, VIN = 0V or VCC, IOUT = 0V 0.5 1 µA ICCT Increase in ICC per Input VCC = 3.6V, VIN = 2.0V 3.3 10 µA VCC = 5.5V, VIN = 2.4V 20 30 VCC = 2.7V to 3.6V 20 65 VCC = 4.5V to 5.5V 10 40 VCC = 2.7V to 3.6V 20 30 VCC = 4.5V to 5.5V 10 20 VCC = 2.7V to 3.6V 1 VCC = 4.5V to 5.5V 2 AC CHARACTERISTICS tON tOFF Q Turn-On Time Turn-Off Time Charge Injection B = 1.5V, RL = 50Ω, CL = 35pF B = 1.5V, RL = 50Ω, CL = 35pF CL = 1.0nF, VGE = 0V, RGEN = 0Ω ns ns pC ANALOG SWITCH CHARACTERISTICS Off Isolation RL = 50Ω, f = 1MHz -70 dB BW -3dB Bandwidth RL = 50Ω 300 MHz THD Total Harmonic Distortion VCC = 5V, RL = 600Ω, CL = 50pF, f = 20Hz to 20kHz 0.005 % 2 pF OIRR CAPACITANCE CIN Control Pin Capacitance VCC = 0V, f = 1MHz COFF B Port Off Capacitance VCC = 4.5V, f = 1MHz 7.5 pF CON A Port Capacitance When Switch Enable VCC = 4.5V, f = 1MHz 18 pF Note: 1. Typical values: Rev. 1.8 October 2009 www.aosmd.com Page 4 of 9 AOZ6115 AC Loading and Waveforms Vcc A B Control Input VOUT RL 50Ω t Vcc R = t F = 2.5nS 50% 0V t OFF CL 35pF VOUT Switch Input GND 0.9 x VOUT 0.9 x VOUT 0 t ON Logic input waveform are inverted for switches with opposite logic sense CL Includes Fixture and Stray Capacitance Figure 1. Turn-On/Turn-Off Timing Vcc R GEN V GEN A B Input Control VOUT CL VOUT IN Δ VOUT OFF OFF ON S GND IN ON OFF OFF Q = (ΔVOUT)(CL) Figure 2. Charge Injection Analyzer Analyzer Vcc 10nF A B Logic Input 0V or Vcc Vcc 10nF 50Ω S Logic Input 0V or Vcc GND Figure 3. Bandwidth Rev. 1.8 October 2009 A B 50Ω S GND Figure 4. Harmonic Distortion www.aosmd.com Page 5 of 9 AOZ6115 AC Loading and Waveforms (Continued) Network Analyzer Vcc VIN B VOUT 50 Ω A S Vcc or 0V + 50 Ω Source Signal 50Ω GND Figure 5. Off Isolation Vcc 10nF A S Capacitance Meter f = 1MHz B 0V or Vcc GND Figure 6. ON/Off Capacitance Measurement Rev. 1.8 October 2009 www.aosmd.com Page 6 of 9 AOZ6115 Package Dimensions, SOT23-5L Gauge Plane Seating Plane D L2 e1 C 5 L E E1 θ 1 e b A2 A aaa A1 RECOMMENDED LAND PATTERN 1.90 2.40 0.80 0.95 UNIT: mm 0.63 Dimensions in millimeters Dimensions in inches Symbols A A1 A2 Min. — 0.00 0.70 Nom. — — 0.88 Max. 1.00 0.10 0.95 Symbols A A1 A2 Min. — 0.00 0.028 Nom. — — 0.035 Max. 0.039 0.004 0.037 b C D E E1 0.35 0.10 2.80 2.60 1.50 0.40 0.13 2.90 2.80 1.60 0.50 0.20 3.00 3.00 1.70 b C D E E1 0.014 0.004 0.110 0.102 0.059 0.016 0.005 0.114 0.110 0.063 0.020 0.008 0.118 0.118 0.067 e e1 L L2 aaa 0.95 BSC 1.90 BSC 0.30 0.40 0.60 0.25 BSC 0.10 e e1 L L2 aaa 0.037 BSC 0.075 BSC 0.012 0.016 0.024 0.010 BSC 0.004 θ 0° — 8° θ 0° — 8° Notes: 1. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 5 mils. 2. Dimension "L" is measured in gauge plane. 3. Tolerance ±0.10mm (4 mil) unless otherwise specified 4. Refer to JEDEC MO-193C AB. 5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. Rev. 1.8 October 2009 www.aosmd.com Page 7 of 9 AOZ6115 Tape and Reel Dimensions, SOT23-5L Tape P2 P1 D1 D0 E1 K0 E2 E B0 A0 P0 T Feeding Direction UNIT: mm Package A0 B0 K0 SOT-23 5 & 6L LP 3.15 ±0.10 3.20 ±0.10 1.40 ±0.10 D0 D1 1.00 1.50 ±0.05 +0.10/-0.00 Reel E E1 E2 P0 P1 P2 T 8.00 ±0.30 1.75 ±0.10 3.50 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 0.23 ±0.03 W1 S K R M N J H UNIT: mm Tape Size Reel Size M N 8mm ø177.8 ø177.8 Max. 55.0 Min. W1 H 8.4 13.0 +1.50 / -0.0 +0.5 / -0.2 S K R J 1.5 Min 10.1 Min. 12.7 4.0 ±0.1 Leader/Trailer and Orientation Trailer Tape 300mm min. Rev. 1.8 October 2009 Components Tape Orientation in Pocket www.aosmd.com Leader Tape 500mm min. Page 8 of 9 AOZ6115 Part Marking AR2D Part Number Code 11 AOZ6115CI Assembly Lot Code Week & Year Code Assembly Location Code This datasheet contains preliminary data; supplementary data may be published at a later date. Alpha & Omega Semiconductor reserves the right to make changes at any time without notice. LIFE SUPPORT POLICY ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. Rev. 1.8 October 2009 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.aosmd.com Page 9 of 9