LED Products Accessories RGB Controller RGB-Controller-101 i.e. for STRF4 & STRF5 Strips No ROHS certificate available, not for resale on EU territories Input Voltage: DC12V, Output power: 72W (12V), Max current: 6A Packaging dimension: L91.7xW66xH52 (mm), Gross weight: 73g Output signal: RGB three channels signal Remote distance: Wireless control it is available in 100-meter (No barriers) Display: 16 static, 3 colors jump change, 7 colors jump change 3 colors gradual change, 7 colors gradual change. Speed of dynamic can adjust. Brightness of static can adjust RGB-Controller-303 i.e. for STR3 RGB Strips Working Temperature: -20~60 degree No RoHs certificate available, not for resale on EU territories Supply Voltage: DC 5-24V Product size: L210*W40*H30mm, Package size:L295*W45*H35mm Changing mode: 29 modes Remote distance: 100m, Color depth: Max.256 level per RGB Bright adjust: 8 levels Net weight:175g, Gross weight:205g Output: Three CMOS drain-open output Max output current: 8A per channel Universal Power supply PS-DC12V-36W-(AC100-240V) i.e. for STRF5-5050-WP-T size: 110x45x25mm, weight 200g Input 100-240V 50-60Hz, Output DC12V 3A (36W) Over-voltage, over-current, short-circuit protection Operating Temperature Range: -10 Deg ~40 Deg CE Certification JL-1220A i.e. for powering one reel of Flex strips Size 180x25x25mm, weight 250g, Water Proof Input 90~250V, Output 12V 1.5A max (18W) For hobby use only Not CE certified. Holders for through hole LEDs 3~10mm LC-xx Material: A.B.S., Burning point 80~100°C LC-xxB Material: Brass Both types are chrom plated LC-03, LC03B and LC-05 is 3 pcs set: holder, nut, and bottom filling LC-05B, LC-08, LC-08B, LC-10, LC-10B is 4 pcs set: holder, nut, washer and bottom filling Connectors and Cables STR-CAB2 - Interconnect strips for STR1/2 assembled 2 x 30cm cable + 2 connectors RGBStrip-Cable - Interconnect strips for STR3 assembled 4 x 30.5cm cable + 2 connectors STR-CONN1 connector for STR1/2 (set of 1 housing + 2 pins) Power source for testing LEDs LED-TEST (power source for testing the LEDs) Suitable for any LEDs with pins (like through-hole etc.) slots: 2x2mA, 2x5mA, 3x10mA, 4x20mA, 2x30mA Also suitable for Auto (UFO, Piranha) LEDs slots: 1x20mA, 1x50mA, 1x70mA, 1x150mA Power source: 9V battery (NOT included with the tester) Size 85x55x25mm, weight 80g (including 9V battery) Converter (Driver) for 1W power LEDs PCB01-1WBULB Input 12V, output 350mA (Voltage automatic) Size of PCB 12x13mm, weight 2.9g