Hebei I.T. (Shanghai) Co., Ltd. Monocolor Flexible SMD LED SPECIFICATION : STRF5-5050-Y30-12V-WP-T Model No. Features: The application of soft & flexible PCB makes the strip possible to be bent into any shape as per users’ needs. The viewing angle as wide as 120°and adjustable length by cutting off or connecting every three LED's enable it to be more suitable for the applications of signs, advertisings and backlights. Applications: ■Channel Letters ■Lighting source for shop windows ■Indoor Decoration Lighting ■Advertising Signs ■Replacement for Neon www.ledz.com Page : 1/4 Hebei I.T. (Shanghai) Co., Ltd. STRF5-5050-Y30-12V-WP-T Non-waterproof 5050-30 LEDS/M LED strip ■ Drawing (1 meter) 33.5 note 1.All dimensions are in millimeters. 2.Tolerance is ±0.25mm unless otherwise specified. 3.Lead spacing is measured where the leads emerge from the package. 4.Specifications are subject to change without notice. www.ledz.com Page : 2/4 Hebei I.T. (Shanghai) Co., Ltd. STRF5-5050-Y30-12V-WP-T ■Rating Electrical/Optical Characteristics(1 meter) Item WARM White Operation Voltage(V) DC12 Power Dissipation(W) 7.2 Input Current(mA) 600 Wavelength(nm) CCT:587-592 Single LED Luminous Intensity(MCD) 1800 Luminous Flux(lm) 135-165 Angle(°) 120 Operation Temperature( ) ℃ -30~60 single LED Operating Current(mA) 60 LED Quantity(pcs) 30 Dimension:(mm) L1000*W10*H1.8mm Life Time(hrs) 50000 net weight:(g) 53.6 Approval UL/CE/ROHS ■ Rating Electrical/Optical Characteristics(5 meter) Item Power Dissipation Total Length White 36W 5m±0.25mm. Input Current(mA) 3000 Weight 268g www.ledz.com Page : 3/4 Hebei I.T. (Shanghai) Co., Ltd. STRF5-5050-Y30-12V-WP-T Model No. ■ :FYSH-5050LUWW3C-60-24V-WW10 How to use: 1. Please use this product with 12V DC. 2. Please complete the ESD-prevention before using. 3. The flexible LED strips should be neither bent into right-angles nor folded. 4. For this product, every three LEDs on the same strip can be cut off and use separately (namely, every 100mm works as a group). Please refer to the ‘Outline’ for the details. 5. The calculating way that how many this product a power supply can upload is: the current(A) that the power supply can offer/the current distributed to each single group*total group of this product 6. The strip quantity of each sting that directly connected to the power supply should not exceed 30 PCS; otherwise, the brightness of the strip at the end of the string will be dimmed because of the voltage reduction. Although a loop circuit can avoid reduction happening, one string should not connect too many strips. 7. The wire with gray line is anode, while the red 、green、blue 、yellow、white is cathode, If polarities connected in a wrong way, the strip will not be lit, but will not be damaged either. What only needs to do is changing the polarity connection. 8. When installing the strips in the plastic letters or characters, please try to use 3 or 4 branch wires and when doing the connection try to make the strips in a letter or character or box form a loop circuit or several loop circuits by using red and black wire to connect the strips at the end of the strokes together according to their polarities. 9. This product is water-proof. 10.When installing the strip, the double-sided adhesive tape or carpenter’s glue is required to make the clip slot of the strip firmly stuck together. When using the double-sided adhesive tape, proper glass glue must be spread to avoid the strip falling off after long-time exposed in the sunlight. 11.The strip quantity of each sting that directly connected to the power supply should not exceed 30pcs; otherwise, the brightness of the strip at the end of the string will be dimmed because of the voltage reduction. Although a loop circuit can avoid reduction happening, one string should not connect too many strips. 12.No push, squeeze or press on the components of the strip for fear damaging the components to affect the lighting effects. www.ledz.com Page : 4/4