Hebei I.T. (Shanghai) Co., Ltd. LED SPECIFICATION Part No./型号：RGB-Controller-101 Instructions: Thank you for using RGB-Controller-101 of our company. Before installation, please read this manual carefully to ensure fully understand and proper use in order to avoid unnecessary damages to the controller. Before using, please check to confirm whether there is any damage caused during the transport process, if there is, please notify your supplier and do not use the product. After-sale services: Warranty of this product is one year, in this period we guarantee repairing or replacement service with no charge if it is normally used according to the instruction. If the customer does not follow the instructions and following provisions in this manual, which results in product damage, the supplier is not responsible for any problems arising and defects, even in the warranty period, maintenance costs borne by the customer. 1. Damage caused by misuse, such as not in accordance with the instructions. 2. Damages caused by unauthorized removal, repair, modify of the circuit; incorrect connection and replacement of the chips. 3. Damage caused by transportation, shock, falling after purchase. 4. Damage caused by earthquake, fire, flood, lightning and abnormal voltage. 5. Damage caused by negligence or improper maintenance, such as storage at high temperature and humid environment, vicinity of hazardous chemical substances. 6. Replacement of products. Instructions for safety: Making sure you use the product perfectly and safely, please observe the instructions and warning on this manual. Attention! Operate cautiously and read these instructions carefully. 1. For installation, try to avoid the minefields, strong magnetic field and high-pressure area. 2. Ensure that the wire is connected correctly and firmly in order to avoid short-circuit damage to parts and posing a fire hazard. 3. Please install controller in a well-ventilated place to ensure that the ambient temperature is moderate. 4. Before using this product, please check the DC power and voltage meet the product technical requirements; positive and negative polarity is defined consistent to the product. 5. Prohibit live wiring, check to confirm wiring is correct, if no short-circuit, then power! 6. If any problems do not make unauthorized repairs. Any doubts please contact your local supplier. This manual applies only to this product of our company, subject to changes without notice. Introduction This RGB series controller is a smart RGB three colors light controller dedicated to long-illumination LED light, using the most advanced PWM (Pulse Width Modulation) digital control technology, the controller can be operated through IR wireless remote controller. The installation of LED controller can apply to commercial or home lighting on different occasion with different environment, extend the LED life span, and save energy; LED and RGB lights can use this controller to decolorize. www.ledz.com 1/5 Hebei I.T. (Shanghai) Co., Ltd. LED SPECIFICATION Part No./型号：RGB-Controller-101 1. Technology specifications Type RGB-Controller-101 Input power DC12V Output signal RGB three channels signal Max load current 6A Output power 72W(12V) Controller dimension L57×W35× H22.5 (mm) Remote dimension L85×W52×7(mm) Packaging dimension L91.7×W66×H52(mm) Gross weight 73g 2. Functions (1).RGB full colors LED strip controller. (2).Control way: Wireless control, it is available in 100-meter (No barriers). (3).Display:16 static, 3 colors jump change, 7 colors jump change, 3 colors gradual change, 7 colors gradual change. (4).Speed of dynamic can adjust. Brightness of static can adjust. (5).Having memory when power fails. (6).Function of both controller and dimmer. (7).Standby function. (8).Colorized control panel (9).Black and white shells are optional. (10).RGB three channels signal (A total of positive and negative). 3. Structure (1).View of major controller：（chart 1） www.ledz.com 2/5 Hebei I.T. (Shanghai) Co., Ltd. LED SPECIFICATION Part No./型号：RGB-Controller-101 (2). View of remote controller (chart 2). 4. Connection diagram of controller (1).Connection diagram to low power LED: （chart 3） www.ledz.com 3/5 Hebei I.T. (Shanghai) Co., Ltd. LED SPECIFICATION Part No./型号：RGB-Controller-101 (2).Descriptions for panel and remote controller keys. Symbol Name Function OFF/ON On/off: turn on or off the LED controller :increase/decrease brightness，totally 16-level BRT+/BRT- brightness， press and hold can change brightness continuously static red Static green Static blue Static white static orange Static light green Static deep blue 7 colors jump change static deep yellow Static cyan Static pink White gradual change static yellow Static light blue Static purple 7 colors gradual change Static light yellow Static sky blue Static magenta Three primary colors jump change 5. Failure analysis and solutions Failure Analysis Solutions 1. No power. No light 2. Reversed the polarity. 1. Check the power 3. Wrong connection or poor 2. Make sure the polarity is right. contact. 3. Re-check the wire connection. 4. LED light has been bad. 1. Input wire is too long to cause Brightness of LED is not consistent wire loss. 2. Diameter of wire is too thin to cause wire loss. 3. Power overload. 4. Controller overload. 1. Shorten wire or use loop circuit. 2. Calculate the current, and then replace thick wire. 3. Replace larger power. 4.Add a power amplifier Tips: The effective power is generally only 80% of the marked power, so it is recommended in selecting the power supply, the user choose a slightly larger one than the LED load power, at least for more than 20%! www.ledz.com 4/5 Hebei I.T. (Shanghai) Co., Ltd. LED SPECIFICATION Part No./型号：RGB-Controller-101 Appendix: dynamic modes’ description（list 3）. Mode Description FLASH Three colors jump change: red→green→blue Seven colors jump change: STROBE red→green→blue→yellow→cyan→purple→white FADE Three colors gradual change: red→green→blue Seven colors gradual change: SMOOTH red→green→blue→yellow→cyan→purple→white 6. Packaging (1).Packaging details (chart 4). (2).Packaging list (list 4). Symbol Name Picture B/A(RGB) A Controller B IR(controller) C Manual 31E0RGB External QTY Unit 57*35*22.5(mm) 1 PCS 85*52*7.0(mm) 1 PCS A6 sheet 1 PCS dimension(mm) (3). Carton packaging Small Box Packing: 40PCS/carton www.ledz.com 5/5