OPTOWAY SPS-7110V-2RG

Optoway
1
SPS-7110V-2RG
***********************************************************************************************************************************************************************
SPS-7110V-2RG
(RoHS Compliant)
1260 to 1620 nm / 1.5 Gb/s Dual Optical SM Receiver
**********************************************************************************************************************************************************************
DESCRIPTION
FEATURES
l SMPTE 292M/297M/259M Compatible
l Speed from 50 Mbps to 1.5 Gbps
l Support Video Pathological Patterns for SD-SDI and
HD-SDI
l Dual Receiver with Duplex LC
l Based on Industry Standard SFP
l Single +3.3 V Power Supply
l RoHS-6 Compliant
l 0 to 70oC Operation
l Hot Pluggable
The SPS-7110V-2RG is a dual channel optical single mode
receiver module designed to receive optical serial digital
signals as defined in SMPTE 292M/297M/259M. It
supports from 50 Mbps to 1.5 Gbps and is specifically
designed for received the SMPTE 292M, SMPTE 297M
and SMPTE 259M SDI pathological patterns. It is with the
SFP 20-pin connector to allow hot plug capability.
APPLICATIONS
l SMPTE 292M/297M/259M Compliant
Electrical-to-Optical Interfaces
l High-density Video Routers
ORDER INFORMATION
P/No.
SPS-7110V-2RG
Type
2-RX
RX1
λ
Sen.
(nm)
(dBm)
50 to 1500 1260/1620 0 to -20
Bit Rate
(Mb/s)
RX2
λ
Sen.
(nm)
(dBm)
1260/1620 0 to -20
Package
Temp
(oC)
RoHS
Compliant
LC SFP
0 to 70
Yes
Package
Temp
(oC)
RoHS
Compliant
LC SFP
0 to 70
Yes
RELATED PRODUCTS
P/No.
SPS-7110V-2TG
Type
2-TX
Bit Rate
(Mb/s)
50 to 1500
TX1
λ
(nm)
1310
TX2
Power
(dBm)
0 to -7
λ
(nm)
1310
Power
(dBm)
0 to -7
LINK DISTANCE
Transmitter
Receiver
SPS-7110V-2TG
SPS-7110V-2RG
SDI
Bit Rate
Max. Link Distance (km)
HD-SDI
1.485Gbps
21
SD-SDI
270Mbos
30
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-2RG
2
***********************************************************************************************************************************************************************
ABSOLUTE MAXIMUM RATINGS
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
ESD Tolerance on all pins
Relative Humidity
Symbol
Tstg
Tc
Vcc
Min
-40
0
0
---
5
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Case Temperature
Tc
Baud Rate
Power Supply Current
Icc
Min
3.13
0
50
Max
85
70
4
1
95
Units
o
C
o
C
V
KV HBM
% RH
Typ
3.3
Max
3.47
70
1500
250
1485
200
Notes
non-condensing
Units / Notes
V
o
C
Mb/s
mA
Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Wavelength of Operation
Sensitivity for SMPTE 292M
1.485 Gb/s
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Optical Return Loss
Electrical
CML Output (Differential)
Symbol
Sen
Pa
Pd
Typ
Max
Units
1260
0
0
---31
1
-----
1620
-18
-20
-21
--6
nm
dBm
dBm
dBm
dBm
dB
dB
850
270
800
1.5
0.5
Vcc+0.3
Vcc+0.3
0.5
mVp-p
ps
ps
ns
V
V
V
V
-----27
550
Optical Rise Time / Fall Time
tr / tf
Output LOS Voltage -- Low
Output LOS Voltage -- High
SCL, SDA
V OL
V OH
V OH
V OL
1.
Min
0
2.5
2.5
0
660
Notes
Pathological
PRBS 223-1, BER=1E-12
Transition: low to high
Transition: high to low
AC coupled output
1, SMPTE 292M
1, SMPTE 344M
1, SMPTE 259M
IOL=-1.6mA, 1 TTL unit load
IOH=40µA, 1 TTL unit load
20% to 80%, unfiltered.
MODULE DEFINITION
Module Definition
PIN 5
PIN 6
Interpretation by Host
4
SCL
SDA
Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector
(NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM
protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-2RG
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Name
Vee
RX2RX2+
Vee
SCL
SDA
Vee
NC
NC
NC
Vee
RX1RX1+
Vee
Vcc RX1
Vcc RX2
Vee
NC
NC
NC
Function
Signal Ground
Negative Differential Output (2)
Positive Differential Output (2)
Signal Ground
Serial I2C Clock
Serial I2C Data
Signal Ground
No Connection
No Connection
No Connection
Signal Ground
Negative Differential Output (1)
Positive Differential Output (1)
Signal Ground
Power Supply (1)
Power Supply (2)
Signal Ground
No Connection
No Connection
No Connection
Notes
+3.3V±5%, Internal connected
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-2RG
4
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
1
RD Re-Clocker
2
100Ω Differential
RD +
3
4
VCC 3.3V
5
4. 7K 4. 7K
6
7
I2C CLK
8
I2C DATA
9
10
Vee
NC
RX2 -
NC
RX2 +
NC
Vee
Vee
SCL
Vcc_RX2
SDA
Vcc_RX1
Vee
Vee
NC
RX1 +
NC
RX1 -
NC
Vee
20
19
18
17
16
100nF
10uF
VCC 3.3V
1uH
15
1uH
14
13
100nF
10uF 100nF
10uF
12
11
RD +
100Ω Differential
Re-Clocker
RD -
1. Consult Chipset manufacturer’s data sheet and application data for appropriate receiver input biasing network.
PACKAGE DIAGRAM (Units in mm)
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-2RG
5
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
1.0
Subject
Initial datasheet
Release Date
2008/10/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0