MA-COM MAMO-000900

MAMO-00900-1291HT
I/Q Modulator/Demodulator
850-960 MHz
Rev. V3
Features
•
•
•
•
•
•
•
Excellent Carrier Suppression ~34dBc
6.0 dB Typical Modulator Conversion Loss
+17 to +20 dBm LO Drive
High 3x1 and 5x1 Harmonic Suppression
No External Matching Required
Low Cost Miniature Plastic MLP Package
Lead Free and RoHS Compliant
MLP 6mm Package
Circuit Side View
P IN
28
P I N 21
PIN 29
AREA
GND
PIN L O
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Incident LO Power
+20 dBm C.W.
Incident RF Power
+20 dBm C.W.
1. Exceeding these limits may cause permanent damage.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
PI N I
P IN
14
PIN Configuration3
Absolute Maximum Ratings
Operating Temperature
P I N 15
PI N 8
1,2
Maximum Ratings
P IN RF
P IN 7
These modulators/demodulators are well suited for
GSM and CDMA Cellular basestation applications,
as well as most RFID systems, particularly where
small size and high performance are required.
Typical applications include quadrature modulation
requirements in wireless receivers and transmitters.
Parameter
P IN 2 2
P IN 1
Description and Application
M/A-COM's MAMO-000900-1291HT is a silicon
monolithic
850-960 MHz, high barrier, I/Q
Modulator/Demodulator. Encapsulated in a low cost,
miniature surface mount PQFN 6mm square, 28lead plastic package the die utilizes M/A-COM’s
unique HMIC silicon/glass process. This process
enables the realization of low loss passive elements
and efficient diode technology which in turn provides
excellent harmonic suppression. In addition, the
incorporated monolithic design techniques provide
unparalleled amplitude and phase imbalance
performance during demodulation thus adding to the
unit’s overall versatility.
PI N Q
3.
PIN
Function
PIN
Function
1
GND
15
GND
2
GND
16
GND
3
GND
17
GND
4
LO
18
RF
5
GND
19
GND
6
GND
20
GND
7
GND
21
GND
8
GND
22
GND
9
GND
23
GND
10
GND
24
GND
11
I
25
Q
12
GND
26
GND
13
GND
27
GND
14
GND
28
GND
The exposed pad centered on the package bottom must be
connected to RF and DC ground. (For PQFN Packages)
Ordering Information
Part Number
Package
MAMO-000900-1291HT
Tape and Reel
MAMO-000900-1291HB
Sample Test Board
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMO-00900-1291HT
I/Q Modulator/Demodulator
850-960 MHz
Rev. V3
Electrical Specifications (Modulator): TA = 25ºC, Z0 = 50Ω
Parameter
Frequency Range
Test Conditions
Units
Min
Typ
Max
Output Power
900 MHz
850-960 MHz
LO Drive = +19 dBm
I/Q = -7 dBm, I/Q = 400 kHz
FRF = FLO - 0.4 MHz
dBm
-14.5
-15
-13.5
-14
-
LO Carrier
Suppression
850-960 MHz
LO Drive = +19 dBm
I/Q = -7 dBm, I/Q = 400 kHz
FRF = FLO + 0.4 MHz
dBc
29
34
-
SSB Rejection4
850-960 MHz
LO Drive = +19 dBm
I/Q = -7 dBm, I/Q = 400 kHz
FRF = FLO + 0.4 MHz
dBc
30
36
-
3 x 1 Harmonic
Suppression
850-960 MHz
LO Drive = +19 dBm
I/Q = -7 dBm, I/Q = 400 kHz
FRF = FLO + 1.2 MHz
dBc
58
68
-
5 x 1 Harmonic
Suppression
850-960 MHz
LO Drive = +19 dBm
I/Q = -7 dBm, I/Q = 400 kHz
FRF = FLO + 2.0 MHz
dBc
85
89
-
ACPR CDMA 20005
900 MHz Carrier Freq
LO Drive = +19 dBm
BB AC Voltage = 275mVp-p
dBc
72
77
-
Output Noise Floor
850-960 MHz
LO Drive = +19 dBm
I/Q Power level = -7 dBm
dBm/Hz
-
-161
-
LO Port Return Loss
850-960 MHz
LO Drive = +19 dBm
I/Q Power level = -7 dBm
FRF = FLO + 0.4 MHz
dB
19
26
-
RF Port Return Loss
850-960 MHz
LO Drive = +19 dBm
I/Q Power level = -7 dBm
FRF = FLO + 0.4 MHz
dB
6
9
-
IF Bandwidth
850 ≤ LO ≤ 970 MHz
LO Drive = +19 dBm
I/Q Power level = -7 dBm
MHz
65
-
-
4. When the LO frequency is greater than the RF frequency, the
upper sideband is suppressed.
5. The Baseband I and Q input signals were generated using the
following settings in the Agilent E3844C Vector Signal Generator:
FWD CDMA2000 SR1 Pilot
Filter: IS-95 Mod w/EQ
Link: Forward
IQ Mod Filter: Through
PRE Clip: 100.0 %
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMO-00900-1291HT
I/Q Modulator/Demodulator
850-960 MHz
Rev. V3
Modulator Band Performance 850-960 MHz
Carrier Suppression, SSB Rejection,
3rd Harmonic, 5th Harmonic (dBc)
0
-20
SSB REJECTION
-40
CARRIER SUPPRESSION
-60
3rd HARMONIC
-80
5th HARMONIC
-100
-120
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
Modulator/Demodulator Return Loss 850-960 MHz
0
-5
Return Loss (dB)
R Port
-10
-15
-20
L Port
-25
-30
-35
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMO-00900-1291HT
I/Q Modulator/Demodulator
850-960 MHz
Rev. V3
Output Power 850-960 MHz
-10
-11
Output Power (dBm)
-12
-13
-14
-15
-16
-17
-18
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
Output Noise Floor
Output Noise Floor (dBm/Hz)
-100
-120
-140
Output Noise Floor
-160
System Noise Floor
-180
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMO-00900-1291HT
I/Q Modulator/Demodulator
850-960 MHz
Rev. V3
Electrical Specifications (Demodulator) @ +25 °C, Z0 = 50Ω
Parameter
Frequency Range
Test Conditions
Units
Min
Typ
Max
Conversion Loss
900 MHz
850-960 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
dB
-
12
12.6
13
14
Amplitude
Imbalance
850-960 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
dB
-
0.05
0.3
Phase
Imbalance6
850-960 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
deg
-
1.0
3.0
Input IP3
850-960 MHz
LO Drive = +19 dBm
RF Input = -7 dBm (each tone)
Tone 1 is 10 MHz above LO Freq
Tone 2 is 11 MHz above LO Freq
dBm
30
35
-
Input 1dB
Compression
900 MHz
850-960 MHz
LO Drive = +19 dBm
FRF = FLO + 0.4 MHz
dBm
14.5
16
-
IF Bandwidth
-
850 MHz ≤ LO ≤ 970 MHz
FRF = FLO + FIF; 0 ≤ FIF ≤ 65 MHz
MHz
65
-
-
LO Return Loss
850-960 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
dB
19
26
-
RF Return Loss
850-960 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
dB
6
9
-
6. When the LO frequency is greater than the RF frequency, the “Q” output leads the “I” output by 90 degrees nominal.
Demodulator Conversion Loss 850-960 MHz
Demodulator Conversion Loss (dB)
-11
-12
PLO = 20dBm
PLO = 17dBm
-13
PLO = 19dBm
-14
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMO-00900-1291HT
I/Q Modulator/Demodulator
850-960 MHz
Rev. V3
Demodulator Input IP3 and Input 1dB Compression 850-960 MHz
45
IIP3 (dBm), Input 1dB Compression (dBm)
IIP3 @ 19dBm LO
IIP3 @ 20dBm LO
40
35
30
IIP3 @ 17dBm LO
25
20
Input 1dB Compression @ 19dBm LO
15
10
5
0
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
Demodulator Phase and Amplitude Imbalance 850-960 MHz
1
3.00
0.9
2.50
0.8
0.7
2.00
0.6
Phase Imbalance @ 17dBm
0.5
1.50
0.4
Phase Imbalance @ 19 dBm LO
1.00
0.50
0.3
Amplitude Imbalance (dB)
Phase Imbalance (Degrees)
Phase Imbalance @ 20dBm
0.2
Amp. Imbalance @ 17dBm LO
Amp. Imbalance @ 20dBm LO
0.1
0.00
0
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMO-00900-1291HT
I/Q Modulator/Demodulator
850-960 MHz
Rev. V3
MAMO-000900-1291MT Outline – 6mm PQFN, 28-Lead
7
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.