Data Sheet Mechanical Drawing 13.5 max 5.1+/- 0.1 ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 IN08145 YYWW 13.0 max General Information Customer Part Number Revision Description Date Reference Doc Control # Issue (For ICE use only) Item Inductance @0Adc IN08145 0 Inductor JUL-21-2009 ---Specification Pins Spec S-F 260 nH +/- 10% Inductance @Isat at 25degC S - F 187 nH min DCR S-F Isat at 25degC S-F 60 Adc max Isat at 125degC S-F 48 Adc max 8.0 nom. 0.1 MAX for coplanarity (a) 2.5 +/- 0.5(X2) (b) unit:mm Sample Test Data Test Condition 100 kHz, 1Vrms, series 100 kHz, 1Vrms, series (60 Adc) 0.165 mOhms +/- 10% +25 deg C Remark Recommended PCB Layout Schematic 1. 3.2 S 2. 3. 7.6 F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. 13.5 Rev. 0 Description Initial release 4. 5. Isat is the current at which the inductance drops by 20%. This is RoHS compliant product. The max operating temperature is 130degC (ambient + temperature rise). Inductance vs. Current Curve as attached. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. unit:mm PRD Emily CHK Gary APP Date NTFY L. L. Chou 2009/7/21 2009/7/21 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN08145 Inductance vs. Current 100.0 +25 degC % Inductance 90.0 80.0 +125 degC 70.0 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Current (A) PAGE 2 OF 2