Data Sheet Mechanical Drawing 13.5 max IN06117 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 13.0 max 5.0 General Information Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) Item Inductance @0Adc IN06117 0 Inductor AUG-07-2009 ---Specification Pins Spec S-F Inductance @Isat at 25degC S - F 240 nH +/- 10% 175 nH min DCR S-F Isat at +25degC S-F 50 Adc max Isat at +125degC S-F 45 Adc max Isat at -40degC S-F 55 Adc max Idc S-F 50 Adc max 7.1 max (a) 2.54(X2) (b) unit:mm Sample Test Data Test Condition 1 MHz, 0.1Vrms, series 1 MHz, 0.1Vrms, series (50 Adc) 0.165 mOhm +/- 10% +25 deg C Recommended PCB Layout 3.2 Schematic Remark 1. S 2. 7.1 F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. 13.5 Rev. 0 Description Initial release 3. 4. 5. Isat is the current at which the inductance drops by 15%. Idc is the current at which the temperature of the part increases by 40 deg C. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. This is RoHS compliant product. Inductance vs. Current Curve as attached. unit:mm PRD CHK APP Date NTFY Emily L. L. Chou 2009/8/7 2009/8/7 Gary __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN06117 Inductance vs. Current 100.0 90.0 % Inductance +25 degC 80.0 -40 degC 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 50 55 Current (A) PAGE 2 OF 2