VC4000 Charger Unity® XG-100P VERSATILE CHARGING FOR MAXIMUM EFFICIENCY The VC4000 Charger Is a rapid charger Is compatible with Lithium Polymer and Lithium Ion battery packs Can be mounted in a vehicle or used as a desk charger STANDARD FEATURES The VC4000 is a rapid charger with the capability to charge Lithium Polymer and Lithium Ion batteries in 4 hours or less. The charger supports the Unity XG-100P portable and is independent from frequency or system operation. The VC4000 includes the following features: Colored LEDs: Provide charging status. Positive Latch: Ensures that the radio or battery pack is securely in place while it is in the charger. Versatile Mounting Options: Enables the charger to easily fit different vehicle mounting requirements. Automatic Restart: Constantly monitors the battery while it is in the charger and will start charging the battery as soon as it falls below 90% of capacity. Optimal Charging without Overcharging: Provides microprocessor-controlled charging for long battery life and maximum battery performance. Protective Circuitry: Prevents damage to battery resulting from charging batteries that are not within the required temperature or voltage range. Charging Efficiency: Communicates with the battery’s internal fuel gauge for optimal charging efficiency. Repeater Control: Has an enable/disable circuit for use with a vehicular repeater. The vehicular repeater is enabled when the radio is removed from the charger. Ignition Sense (Dipswitch configurable): Unit is turned off when the ignition is turned off, preventing vehicle battery drain. VERSATILE DESIGN The versatile design of the VC4000 provides the flexibility to meet different users’ needs. The unit can charge the battery with or without the radio attached and can also accommodate a radio with the speaker mic and/or belt clip still attached. The charger may be hard wired for permanent installation or powered using the optional DC cigarette lighter adapter for temporary in-vehicle installation. The VC4000 may also be used for desktop charging with the optional AC adapter. harris.com GENERAL SPECIFICATIONS Applications: Charges Lithium Polymer and Lithium Ion batteries for the Unity XG-100P Source Voltage: 11 to 16 VCC Dimensions (D x W x H): With Bracket: 3.125 x 5.125 x 5.437 in. (7.94 x13.02 x 13.81 cm) Without Bracket: 3.125 x 4.312 x 4.375 in. (7.94 x10.95 x 11.11 cm) Weight: With Bracket: 13.0 oz (368g) Without Bracket: 10.2 oz (289g) Construction: Polycarbonate and ABS blend Color: Black Charge Current: 1.5A Mounting: Cables, hardware, U-shaped bracket for mounting above or beneath dash, fuse, connector terminals for repeater control, and ignition sense Temperature Limits: ◦ Operating: -22 to +140 F ◦ (-30 to +60 C) Charging: +32 to +122◦F ◦ (+0 to +50 C) Options: Power Supply Kit: Includes AC Adapter and Cigarette Lighter Adapter RoHS Compliant COMPACT AND RUGGED DESIGN ENVIRONMENTAL SPECIFICATIONS STANDARD MIL-STD-801G PARAMETER Vibration Shock Solar Radiation Low Temperature High Temperature Temperature Shock Humidity Low Pressure METHODS & PROCEDURES 514.6 PI, CAT 4 & 24 516.6 PI, IV, V, & VI 505.5 PI 502.5 PI & II 501.5 PI & II 503.4 507.5 PI & II 500.5 PI OPTION NUMBER VC4000 for Unity XG-100P: XPCH4J REGULATORY SPECIFICATIONS FCC Certification: Industry Canada: Automotive Directive: Meets FCC Part 15 ICES-003 72/245/EEC – 95/54/EC Australian C-Tick Mark Technical specifications are subject to change without notice. Products sales are subject to applicable U.S. export control laws. Public Safety and Professional Communications 221 Jefferson Ridge Parkway Lynchburg, VA 24501 USA 1-800-368-3277 (+1-434-455-6403) www.pspc.harris.com harris.com harris.com Harris, assuredcommunications, and Unity are registered trademarks of Harris Corporation. Copyright © 2012 Harris Corporation. All rights reserved. 08/12 ECR-8011