150 watt hf/vhf power amplifiers RF-5833H Series features >> A fully solid-state design, modular construction, and a conservatively rated components combine to provide a high level of reliablity in a “Jerk-and-Run” package The Harris 150 watt power amplifiers increase the output of their respective receivertransmitters to 150 watts PEP/Average in the HF portion of the frequency range (1.6 to 29.99999 MHz) and 60 watts PEP/Average for the VHF portion (30 to 59.99999 MHz). The RF-5833H is used with the RF-7800H-MP, RF-5800H-MP and AN/PRC-150(C) radios. The RF-7800H-MP requires use of the RF-7800H-AD150 Adapter (ordered separately) to facilitate mounting in the RF-5833H-PAs. The RF-5833H Series Power Amplifiers operate in applications that require mediumpower, medium-range communications. These include mobile, boat, or base station installations for general-purpose HF-SSB and VHF-FM voice and data communications. Continuous coverage is provided over the 1.6 to 60 MHz range. Independent outputs are available for separate HF and VHF antenna configurations. The power amplifier amplification section is a broadband design requiring no tuning or adjustment. When used with the RF-5382H and the RF-382A Series Antenna Couplers, the output of the power amplifier is automatically matched to the specified antenna and requires no special operator procedures. Built-in self-test features permit operators or maintenance personnel to check the R/T and associated power amplifier performance down to the module level. Fault conditions are indicated on the radio’s front-panel display. Power output is adjustable via the transceiver front panel or remote control. The RF-5833H-PA002 and PA004 includes an embedded RF-5245 Pre/Postselector for collocated environments. The robust design and construction of these power amplifiers guarantee continuous high performance and reliability in the most severe environments. harris.com SPECIFICATIONS FOR: RF-5833H series configuration options specifications Dimensions: RF-5833H-PA001 RF-5833H-PA002 10.4˝W x 15.5˝D x 6.6 ˝W (26.4W x 39.4D x 16.8H cm) 12.8˝W x 15.5˝D x 6.6 ˝W (32.5W x 39.4D x 16.8H cm) Weight 27 lbs (12 kg) General Frequency Range 1.60000 to 59.99999 MHz Modes of Operation J3E (single sideband, upper or lower, suppressed carrier telephony); H3E (compatible AM single sideband plus full carrier telephony); F3E (FM Telephone) AIA, J2A, selectable (compatible CW) RF Input/Output Impedance 50 ohm (nominal), unbalanced RF Output RF-5833H-PA001 150 Watt Power Amplifier RF-5833H-PA002 150 Watt Power Amplifier with embedded (25 dB) Pre/ postselector RF-5833H-PA003 150 Watt Power Amplifier with low pass filter RF-5833H-PA004 150 Watt Power Amplifier with low pass filter and embedded (25 dB) Pre/postselector accessories RF-7800H-AD150 RF-7800H-MP Adapter for RF-5833H 150 Watt PA RF-5382H 150 Watt Fast Tune Antenna Coupler RF-382A 400 Watt Fast-Tune Antenna Coupler 50 ohm nominal load impedance unbalanced HF connector: Type N VHF connector: Type BNC RF-5073VSM Vehicular Shock Mount RF-5833H-SK001 Site Spares Kit for the RF-5833H-PA001 Power Input +28.0 VDC @ 20 Amps., maximum RF-5833H-SK002 Site Spares Kit for the RF-5833H-PA002 Temperature Range –40°C to +70°C RF-5051PS Power Supply RF-5245 Pre/Postselector Option for the RF-5833H-PA001 10497-0360-01 Low Pass Filter Kit Option for the RF-5833H-PA001 10497-0870-01 Security Locking Kit 10535-0720 RF-5833H to RF-7800H-AD150/RF-5800H/PRC-150 Control Cable 10181-9824 RF-5833H to RF-7800H-MP/RF-5800H/PRC-150 RF Coax Cable 10181-9826 RF-5833H Vehicle DC Power Cable 10497-5036-01 RF-5833H to Audio Cable 10181-9833 RF-5833H to RF-5051PS DC Power Cable environmental Shock/Vibration MIL-STD-810E Leakage MIL-STD-810E (1-meter depth for PA w/o cooling fan) Humidity MIL-STD-810E (0 to 95%) power amplifier Power Output 150 watts PEP/average into 50 ohm ±1 dB (1.6 MHz to 29.99999 MHz) 60 watts PEP/Average into 50 ohm (30.0 MHz to 59.99999) RF Drive Requirements Nominal 100 mW (+20 dBm) Intermodulation Distortion –25 dB from either tone of a two-tone envelope at 150 watts PEP Harmonic Output –45 dBc below 150 watt PEP systems RF-7800H-V0011 150 Watt Vehicular Adapter RF-7800H-V004 150 Watt Vehicular Adapter with Collocation and Low Pass Filter RF-7800H-B0011 150 Watt Base Station Adapter RF-7800H-B0041 150 Watt Base Station Adapter with Collocation and Low Pass Filter RF-7800H-TM0011 150 Watt Mini-Transit Case Adapter RF-7800H-TM0041 150 Watt Mini-Transit Case Adapter with Collocation and Low Pass Filter 1 1 RF-7800H systems listed include RF-7800H-AD150 Adapter Harris Corporation RF Communications Division 1680 University Avenue Rochester, NY 14610, USA 585-244-5830 rf.harris.com harris.com This information was approved for all publishing per the ITAR as “basic marketing information of defense articles“ or as “advertising printed material” per the EAR. Specifications are subject to change without notice. © 2013 Harris Corporation 10/13 DS-205E