3.2 mm x 2.5 mm Ceramic Low Noise SMD Oscillator, LVCMOS / LVPECL / LVDS Product Features Small Surface Mount Package Fast Sample Delivery Fast Sample Delivery Pb Free/ RoHS Compliant Leadfree Processing ISM75 Series Applications xDSL Broadcast Video Wireless Base Stations Sonet /SDH WiMAX/WLAN Server and Storage Ethernet/LAN/WAN Optical modules Clock and data recovery FPGA/ASIC Backplanes GPON 3.20±0.10 Marking 2.50±0.10 1.00±0.15 Frequency LVCMOS LVPECL LVDS Output Level LVCMOS LVPECL LVDS Duty Cycle LVCMOS LVPECL LVDS Rise / Fall Time LVCMOS LVPECL LVDS Output Load LVCMOS LVPECL LVDS Frequency Stability Supply Voltage (Vcc) Aging Current Phase Jitter (RMS) At (12kHz to 20MHz) Operating Temp. Range Storage Temp. Range Part Number Guide Package ISM75 Input Voltage .60 TYP 10.000MHz to 250.000MHz 10.000MHz to 1500.000MHz 10.000MHz to 1500.000MHz 1 6 4 2.30 .70 1.80 2.0 ns max. (10% to 90%)* 0.8 ns max. (20% to 80%)* 0.8 ns max. (20% to 80%)* .90 15pF 50 to Vcc - 2.0 VDC RL=100 /CL= 5pF See Table Below +3.30 VDC ± 5%, +2.50 VDC ± 5% ±3.0 ppm max per year HCMOS = 45 mA max LVPECL = 90 mA max LVDS = 35 mA max 0.5 ps typical .90 .80 Suggested Land Pattern PIN CONNECTIONS PIN 1 Enable/Disable or N/C PIN 2 Enable/Disable or N/C PIN 3 PIN 4 Ground Output PIN 5 PIN 6 Comp. Output or N/C Voltage Supply Dimension Units: mm See Table Below -40 C to +85 C Stability (in ppm) 5 1.60 50% ±5% @ 50% of Vcc 50% ±5% @ 50%* 50% ±5% @ 50%* Sample Part Number: 3 1.30 TYP Logic “0” = 10% of Vcc min, Logic “1” = 90% of Vcc max Logic “0”= Vcc-1.62V max., Logic “1” = 1.02 V min VOD=(Diff. Output) 350mV Typ. Operating Temperature 2 ISM75–31A9H2–155.520 Output Enable / Disable Complimentary Ouput (Pin 5) ** 3 = 3.3V 1 = 0 C to +70 C F = 20 3 = LVCMOS H = Enable (Pin 1) 1 = N.C. 6 = 2.5V 2 = -40 C to +85 C A = 25 8 = LVDS K = Enable (Pin 2) 2 = Output 3 = -20 C to +70 C B = 50 9 = LVPECL Frequency -155.520 MHz NOTE: A 0.01 µF bypass capacitor is recommended between VDD (pin 6) and GND (pin 3) to minimize power supply noise. * Measured as percent of waveform. ** Available on LVDS and LVPECL ouput only. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 03/10/15_A Page 1 of 3 3.2 mm x 2.5 mm Ceramic Low Noise SMD Oscillator, LVCMOS / LVPECL / LVDS ISM75 Series Typical Application: C1 0.01 uF Vcc N/C 6 5 Output 4 Oscillator Enable / N/C 1 2 3 Enable / N/C Pb Free Solder Reflow Profile: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e4 (Au over Ni over W base metallization). ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 03/10/15_A Page 2 of 3 3.2 mm x 2.5 mm Ceramic Low Noise SMD Oscillator, LVCMOS / LVPECL / LVDS ISM75 Series Tape and Reel Information: Quantity per Reel A B C D E F 1000 16 +/-.3 8 +/-.2 7.5 +/-.2 17.5 +/-1 50 / 60 / 80 180 / 250 Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI and Date Code (YWW) Line 2: Frequency PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev: 03/10/15_A Page 3 of 3