4 Pad Plastic Package Quartz Crystal, 3.8 mm x 8 mm Product Features: IL3M Series Applications: r20 ppm Stability SMD Package RoHS Compliant Real Time Clocks Metering Industrial Control Time Reference 8.0 Max. 5.5 Frequency 32.768Khz ESR (Equivalent Series Resistance) 50 K: Max. Shunt Capacitance (C0) 1.7 pF Typical Frequency Tolerance @ 25q C r20 ppm Standard 0.5 2.5 Max. 2 Frequency Stability over Temperature Parabolic -0.034 ppm / q C Typical. Inflection point approx. 27q C, See Graph Below Crystal Cut X-Cut Load Capacitance 12.5 pF Standard Drive Level 1 uW Max. Aging r5 ppm Max. / Year Standard 3.8 Connection Diagram Temperature Operating -40q C to +85q C Standard Storage -40q C to +85q C Standard 5.5 1.3 ppm Typical X Cut Tem perature Coefficient 0 -30 -60 -90 -120 -150 -180 1.3 1.9 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Dimension Units: mm Tem perature Part Number Guide Package IL3M - Sample Part Number: IL3M - HX5F12.5 - 32.768 KHz Stability (ppm) at Room Temperature Stability (ppm) over Operating Temperature Operating Temperature Range H = ±20 ppm X = X Cut 5 = -40°C to +85°C Mode (overtone) F= Fundamental Load Capacitance (pF) 12.5 pF Standard 6 pF Available [email protected]• www.ilsiamerica.com • www.ilsiamerica.com ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] 02/09 Specifications subject to change without notice Page 1 Frequency - 32.768 KHz 4 Pad Plastic Package Quartz Crystal, 3.8 mm x 8 mm Pb Free Solder Reflow Profile: IL3M Series Typical Circuit: *Units are backward compatible with 240C reflow processes Package Information: MSL = 2a Termination = e1 (Sn/Cu/Ag over Ni over Kovar base metal) Tape and Reel Information: Quantity per Reel A B C D E F 1000 16 +/-.3 8 +/-.2 7.5 +/-.2 17.5 +/-1.5 50 / 60 / 80 180 / 250 Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: 32C,Date Code(YWW) [email protected]• www.ilsiamerica.com • www.ilsiamerica.com ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] 02/09 Specifications subject to change without notice Page 2