G5872 Global Mixed-mode Technology Inc. Single-Chip Charge and System Power-Path Management IC Features General Description The G5872 of device is highly integrated Li-ion linear chargers and system power-path management devices targeted at space-limited portable applications. The G5872 offer integrated power-path management with autonomous power-source selection, power FETs and current sensors, high accuracy current and voltage regulation, charge status, and charge termination, in a single monolithic device. In addition to mention above, the G5872 is also integrated push button On/Off controller that manages system power via a push button interface. The interrupt output can be used in menu driven applications to request a system power down. Designed for Single-Cell Li-Ion- or Li-Polymer-Based Portable Applications Integrated Power-Path Dynamic Management (SPM) Feature Allowing the AC Adapter or the USB Port to Simultaneously Power the System and Charge the Battery Power Supplement Mode Allows Battery to Supplement the USB or AC Input Current Accepting USB and AC-Adapter Power Sources Integrated USB Charge Control with Selectable 100-mA and 500mA Maximum Input Current Regulation Limits Dynamic Total Current Management for USB Supports Up to 2-A Total Current 3.3V Integrated LDO Output Thermal Regulation for Charge Control Charge Status Outputs for LED or System Interface Indicates Charge and Fault Conditions Reverse Current, Short-Circuit, and Thermal Protection Power Good (VIN, and Battery Present) Status Outputs Push Button Control of System Power Adjustable Power Down Timer TQFN4X4-32 Package The G5872 powers the system while independently charging the battery. This feature reduces the charge and discharge cycles on the battery, allows for proper charge termination and allows the system to run with an absent or defective battery pack. This feature also allows for the system to instantaneously turn on from an external power source in the case of a deeply discharged battery pack. The IC design is focused on supplying continuous power to the system when available from the AC, USB, or battery sources. Ordering Information ORDER NUMBER Applications Smart Phones and PDA MP3 Players Digital Cameras Handheld Devices Internet Appliances MARKING G5872K11U 5872 Note: K1: TQFN4X4-32 1: Bonding Code U: Tape & Reel TEMP. RANGE PACKAGE (Green) -40°C to +85°C TQFN4X4-32 Power Flow Diagram AC or USB Power In OUT VIN SYSTEM Q1 BATG OVPG QEX PACK+ BAT + PACK− Q2 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.2 Aug 17, 2010 1 G5872 Global Mixed-mode Technology Inc. BAT BATG LDO TS TSET1 TSET2 29 28 27 26 25 OUT 31 30 OUT 32 Pin Configuration VIN 1 24 LEDBATG VIN 2 23 LEDACG OVPG 3 22 LEDING OVPSET 4 Thermal Pad 21 TSET2FLT 20 STAT1 16 PDT CHIPEN PB BATDET INT 17 15 8 14 SPM 13 PG TMR 18 12 7 VSS ISET2 11 STAT2 10 19 PSEL ISET1 6 CHGEN 5 9 HVIN G5872 TQFN4X4-32 Note: Recommend connecting the Thermal Pad to the Ground for excellent power dissipation. Absolute Maximum Ratings (1) Input Voltage Output source current (in regulation at 3.3V LDO) . . .30mA VIN (DC Voltage wrt (with respect to) VSS) . . . .-0.3V to 7V OVPG, HVIN (DC Voltage wrt (with respect to) VSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.3V to 18V BAT, CHIPEN, CHGEN, SPM , PSEL, OUT, ISET1, ISET2, Output sink current (STAT1, STAT2, PG , BATDET , INT , TSET2FLT ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15mA Storage Temperature . . . . . . . . . . . . . . . . -65°C to 150°C Junction Temperature . . . . . . . . . . . . . . . . -40°C to 150°C Reflow Temperature (soldering, 10 sec) . . . . . . . . . 260°C STAT1, STAT2, TS, PG , OVPSET, BATDET , PB , PDT , INT , TSET1, TSET2, TSET2FLT , BATG, LEDBATG, LEDACG, LEDING (all DC voltages wrt VSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3V to 7V LDO (DC voltage wrt VSS) . . . .. . . . -0.3V to VO(OUT) +0.3V TMR . . . . . . . . . . . . . . . . . . . . . . .-0.3V to VO(LDO) +0.3V Input Current VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5A Output Current OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4A (1) Recommended Operating Conditions Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . 4.35 to 7V Input Current, (AC). . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A Input Current, (USB) . . . . . . . . . . . . . . . . . . . . . . . . . 0.5A Operating Junction Temperature Range . . -40°C to 125°C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values are with respect to the network ground terminal unless otherwise noted. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.2 Aug 17, 2010 2