H3SVP1X PERFORMANCE SERIES VGA VFAI LENS DAY/NIGHT H.264 INDOOR FIXED MINIDOME IP CAMERA Honeywell’s latest addition to the Performance Series of IP-based products, the H3SVP1X is a VGA resolution, Day/Night indoor fixed mini-dome network camera engineered to provide extremely crisp images at minimal bandwidth. The H3SVP1X provides VGA (640 x 480) resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in significant storage savings without sacrificing image quality in low light. The 1/4" progressive scan CMOS sensor offers the latest in digital video surveillance technology with accurate colour rendition under a wide variety of lighting conditions. The H3SVP1X also supports the ONVIF specification for interoperability between network video products. HD The compact, one piece design provides fast and easy installation in any application. An optional wall/pendant mount kit is available. A 3-D axis gimbal capable of 360° of pan, 180º of tilt and 360º of horizontal rotation simplifies mechanical camera adjustment. The Vari-focal Auto Iris lens allows the field of view to be adjusted to suit the scene requirements. A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most NVR setup utilities. The H3SVP1X supports dual video streams and multiple compression formats with rates up to 25 frames per second (30 fps for NTSC systems). The compression parameters for the two video streams are independently configurable. The primary stream is dedicated to H.264. The secondary stream can be configured for H.264 or MJPEG. The H3SVP1X features analogue video out for aiming and focusing during setup. With built-in low current Power over Ethernet (IEEE 802.3af), power is supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In situations where PoE support does not exist, the unit can also be powered directly from 24V AC. Market Opportunities The H3SVP1X is perfect for installations where excellent picture clarity at minimal bandwidth is required, making it an ideal camera for retrofitting into existing DVR/NVR installations without requiring additional storage. Features • Outstanding image quality, VGA (640 x 480) resolution • Selectable aspect ratios (4:3 or 16:9) • Simultaneous dual video streams, independently configurable, H.264 and/or H.264/MJPEG • 25 fps (30 fps NTSC) progressive scan • Remote firmware updates • Web server for remote setup of camera video and network parameters • Day/Night, 3.3-12 mm VFAI lens • Supports both dynamic and static IP address assignment • Choice of 24V AC or PoE IEEE 802.3af power inputs • Date/time stamp embedded into video stream • Wall/pendant mount kit available • Camera tamper detection • Video motion detection • NTP time synchronisation support • ONVIF support • Multiple browser support • Includes advanced IP locator software to make system setup easy H3SVP1X SPECIFICATIONS Like all cameras in the Performance Series, the H3SVP1X network camera uses Honeywell technology for camera video motion detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognises object motion within the field of view, then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded, or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. Setup is quick and easy and can be customised through a web client or from an NVR or DVR. The built-in web server provides password protected access to the camera’s video and network setup. SYSTEM DIAGRAM Hybrid DVR Monitor NETWORK Analogue out NVR Keyboard equIP® Series Cameras Performance Series Cameras Monitor Monitor H3SVP1X SPECIFICATIONS Environmental Operational Video Standard PAL/NTSC Temperature Operating: -10°C to 50°C Storage: -40°C to 70°C Scanning System Progressive scan Relative Humidity 0% to 85%, non-condensing Image Sensor 1/4" CMOS Number of Pixels (H x V) 640 x 480 Minimum Illumination 0.19 lux @ 50 IRE, F1.4, 0.08 lux @ 30 IRE, F1.4 Automatic Lens Control DC Iris Level 1-25 Video Output (Aux) 1.0 Vp-p @ 75 ohms S/N Ratio IP Specifications Video Compression Dual stream H.264 and MJPEG Primary Stream Resolution 640 x 480 (4:3) 640 x 360 (16:9) 320 x 240 (4:3) 320 x 180 (16:9) H.264 Bitrate (Typical)* 0.84 Mbps 0.70 Mbps 0.32 Mbps 0.25 Mbps 50 dB or more (AGC off) Frame Rate PAL/NTSC Up to 25/30 fps video in all resolutions Auto Gain Control Off/On, selectable (10-40 dB) Video Streaming Automatic Electronic Shutter 1/60-1/24,500 sec (NTSC) 1/50-1/24,500 sec (PAL) Security Multiple user access levels with password protection Lens Type 3.3-12 mm Vari-focal Auto Iris, F1.4 Video Access from Web Browser Full control of all camera settings available to administrator White Balance AWC, AWC Push, Manual Electrical Input Voltage 24V AC, PoE IEEE 802.3af Input Range 17–28V AC Surge Suppression 1.5 kW transient Power Consumption 3.5 W (max) 24V AC PoE: PD Type 1 Class 1 Mechanical Dimensions (W x H) 125.1 mm x 124.2 mm Weight 0.448 kg camera only Construction Housing: Polycarbonate Finish: Matt texture, off-white Connector Video Output (AUX): 2-pin Molex connector Power Input: Removable screw block Network: RJ45 connector Minimum Web Browsing Requirements Frame Rate 25/30 25/30 25/30 25/30 Storage/Day (GB) 8.86 7.39 3.33 2.58 Dual streaming: H.264 and MJPEG Controllable frame rate and bandwidth Constant or variable bit rate Pentium IV CPU 3.1 GHz or faster 1 GB RAM (32-bit) or 2 GB RAM (64-bit), Windows XP® SP3, Windows 2003 Server R2 (32-bit), Windows 7 (32-/64-bit), Windows Vista SP1, Windows 2008 R2 (64-bit) Internet Explorer 8 or 9 Mozilla Firefox® and Google Chrome Installation and Management Maintenance Honeywell IP Utility software identifies the IP address, checks status of device, firmware upgrades over HTTP Supported Protocols HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, NTP, RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, SSH Standards ONVIF support Regulatory Emissions FCC part 15B, CE (EN55022) Immunity CE (EN50130-4) Safety EU: 60950-1 *Actual bitrate is scene and motion dependent. H3SVP1X SPECIFICATIONS System Integration Accessories Open IP Integration Housing and Mounts ONVIF support and open API for software integration. Refer to www.onvif.org for the ONVIF specification and the Honeywell Open Technology Alliance (www.honeywell.com/security/hota) to learn more about our open and integrated solutions. HD3-MK1 Wall/Pendant Mount Kit, Off-White H3SVP1X Dimensions 89.0 mm 125.1 mm Pendant Mount Option 82.5 mm 23.0 mm 146.7 mm 77.5 mm 73.1 mm 46.0 mm 124.2 mm 46.7 mm 172 mm 154.0 mm Wall Mount Option Ordering H3SVP1X Network, Day/Night Fixed Minidome Camera, 1/4" Progressive Scan, CMOS, VGA Resolution, 3.3-12 mm VFAI Lens, 24 V AC or PoE IEEE 802.3af, H.264, PAL NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications. For additional information, please visit www.honeywell.com/security/uk Honeywell Security Group Aston Fields Road Whitehouse Industrial Estate Runcorn Cheshire WA7 3DL Tel: 08448 000 235 www.honeywell.com HVS-H3SVP1X-02-UK(0613)DS-E June 2013 © 2013 Honeywell International Inc.