HD3MWIHX EQUIP® SERIES WIDE DYNAMIC 720P INDOOR HIGH RESOLUTION TRUE DAY/NIGHT IP DOME CAMERA Honeywell’s latest addition to the EQUIP® Series of IP-based products, the HD3MWIHX, is a high-definition, Wide Dynamic, True Day/Night indoor fixed minidome network camera engineered to provide extremely crisp images at minimal bandwidth. The HD3MWIHX provides 720p resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in significant storage savings without sacrificing image quality in low light. The 1/3" progressive scan CMOS sensor offers the latest in digital video surveillance technology with accurate colour rendition through a wide variety of lighting conditions. The HD3MWIHX also supports the PSIA specification for interoperability between network video products. The compact, one piece design provides fast and easy installation in any application. The camera comes complete with surface and flush mounting options (compatible with a 4S electrical box) and an optional wall/pendant mount kit is available. In addition to the low light colour performance, the camera will automatically switch to black and white. In this mode, lighting can be complemented with infrared for discreet/covert low light surveillance with exceptional monochrome images. In high contrast lighting conditions, the HD3MWIHX delivers higher quality images and significantly better dynamic range (>100 dB) than conventional IP cameras. Designed for environments with difficult lighting, the HD3MWIHX camera offers a unique solution to capture the whole picture regardless of lighting condition or application. HD3MWIHX shown with mounting ring for surface mount A 3D axis gimbal capable of 360º of pan, 180º of tilt and 360º of horizontal rotation simplifies mechanical camera adjustment. The Vari-focal Auto Iris lens allows the field of view to be adjusted to suit the scene requirements, and an onboard analogue output allows the installer to connect a local test monitor while adjusting the camera field of view. A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most NVR setup utilities. The HD3MWIHX supports dual video streams and multiple compression formats with rates up to 30 frames per second (25 fps for PAL systems). The digital compression parameters for the two video steams are independently configurable. The HD3MWIHX features analogue video out for aiming and focusing. HD3MWIHX shown without mounting ring for flush mount With built-in low current Power over Ethernet (IEEE 802.3af), power is supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In retrofit situations where PoE is not available, the unit can also be powered directly from 24 V AC. Market Opportunities The HD3MWIHX is perfect for installations where excellent picture clarity at minimal bandwidth is required. At three times the resolution of standard analogue cameras, yet with similar bandwidth requirements, the HD3MWIHX can be retrofitted on many existing NVR installations without requiring additional storage. Features • Outstanding image quality, 720p (1280 x 720) resolution • Dual digital video streams simultaneously, independently configurable • Web server for remote setup of camera video and network parameters • 30 fps (25 fps PAL) progressive scan • Remote firmware update • True Day/Night, 3.3–12 mm VFAI lens with mechanical IR cut filter • Supports both dynamic and static IP addresses • Choice of 24 V AC or PoE IEEE 802.3af power inputs • Dynamic Range: 115dB • Single model for surface mount and recessed ceiling applications, 4S adapter plate also supplied • Camera tamper detection • Video motion detection • Wall/pendant mount kit available • Selectable compression formats • Includes advanced IP locator software to make system setup easy • Supports input and output alarm contacts • Supports bidirectional audio • PSIA support HD3MWIHX SPECIFICATIONS Like all cameras in the EQUIP IP Series, the HD3MWIHX network camera uses Honeywell technology for camera video motion detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognises object motion within the field of view, then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. The built-in web server provides password-protected access to the camera’s video and network setup. SYSTEM DIAGRAM Hybrid DVR Monitor NETWORK Analogue out NVR Keyboard EQUIP® Series Cameras Monitor Monitor HD3MWIHX SPECIFICATIONS Environmental Operational Video Standard PAL, NTSC Temperature Operating: -10°C to 50°C Storage: -20°C to 60°C Scanning System Progressive scan Relative Humidity 0% to 85%, non-condensing Image Sensor 1/3" CMOS Number of Pixels (H x V) 1280 × 720 Video Compression Dual stream H.264 and MJPEG Minimum Illumination 0.14 lux colour/0.1 lux BW @ 50 IRE, F1.6 Automatic Lens Control DC Iris Level 1-25 Video Output (Aux) 1.0 V p-p @ 75 ohms Primary Stream Resolution 1280 x 720 800 x 450 640 x 360 320 x 180 Bitrate H.264 (Typical)* 2.7 Mbps 1.8 Mbps 0.9 Mbps 0.315 Mbps Dynamic Range: 115 dB Up to 30/25 fps video in all resolutions S/N Ratio 50 dB or more (AGC off) Frame Rate NTSC/PAL Auto Gain Control Off/On, selectable (20-40 dB) Video Streaming Automatic Electronic Shutter 1/30-1/87,000 sec (NTSC and PAL) Security Multiple user access levels with password protection Lens Type True Day/Night (TDN), 3.3 mm-12 mm Vari-focal Auto Iris, F1.6 Video Access from Web Browser Full control of all camera settings available to administrator Minimum Web Browsing Requirements Pentium IV CPU 3.1 GHz or faster 2 GB RAM Windows XP®, Windows 7 (32/64), Windows 2K8 (64) Internet Explorer 6, 7, 8 or 9 Installation and Management Maintenance Honeywell IP Utility software identifies the IP address, discovers cameras, supports firmware upgrades Supported Protocols HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, Telnet Standards PSIA support IP Specifications Wide Tele Diagonal 125.7° 29.9° Horizontal 89.8° 23.9° Vertical 63.6° 17.9° Angle of View White Balance Auto, Manual, WBC Push Audio/Two-Way Line in/out Electrical Input Voltage 24 V AC, PoE IEEE 802.3af Input Range 17–28 V AC Surge Suppression 1.5 kW transient Power Consumption 5.0 W (max) 24 V AC PoE: PD Type 1 Class 2 Mechanical Storage/Day (GB) 28.48 18.98 9.49 3.32 Dual streaming: H.264 and MJPEG Controllable frame rate and bandwidth Constant or variable bit rate Regulatory Emissions FCC, CE (EN55022) Immunity CE (EN50130-4) Safety EU: EN60950-1:2006 *Actual bitrate is scene and motion dependent with H.264 stream. Dimensions (W x H x D) See Diagram Weight 0.47 kg camera only Construction Housing: Polycarbonate & Diecast aluminium Finish: Matt texture, off white Connector Frame Rate 30/25 30/25 30/25 30/25 Video Output: 2-pin Molex connector Power Input: Removable screw block Network: RJ45 connector Alarm I/O: Removable screw block Audio In: Removable screw block Audio Out: Removable screw block HD3MWIHX SPECIFICATIONS System Integration Accessories Open IP Integration Housing and Mounts PSIA support and open API for real interoperability between Honeywell and other manufacturer’s IP-enabled security devices. Refer to the Honeywell Open Technology Alliance [http://www.security.honeywell.com/hota/] to learn more about our open and integrated solutions. HD3-MK1 Wall/Pendant Mount Kit, Off White 89.0 mm 125.1 mm Pendant Mount Option 82.5 mm 23.0 mm 146.7 mm 73.1 mm 77.5 mm 46.0 mm 124.2 mm 46.7 mm 161.5 mm 154.0 mm 125.1 mm 97.1 mm 172 mm 28.5 mm 9.1 mm Wall Mount Option Flush Mount Option Ordering HD3MWIHX Network True Day/Night, 1/3" Progressive Scan, CMOS, Wide Dynamic 720p Resolution Camera, 3.3-12 mm VFAI, 24 V AC or PoE IEEE 802.3af, H.264, PAL HD3MWIH Network True Day/Night, 1/3" Progressive Scan, CMOS, Wide Dynamic 720p Resolution Camera, 3.3-12 mm VFAI, 24 V AC or PoE IEEE 802.3af, H.264, NTSC NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications. For additional information, please visit www.honeywell.com/security/me Honeywell Security Group LOB Building 08, Office 199 P.O.Box 18530, Jebel Ali Dubai United Arab Emirates (UAE) Tel: +971-4-8073200 www.honeywell.com HVS-HD3MWIH-01-ME(0212)DS-E February 2012 © 2012 Honeywell International Inc.