Film Capacitors AXIAL LEAD TAPING SPECIFICATIONS GENERAL SPECIFICATIONS BODY SIZE: Maximum Diameter: (13mm) PITCH: Standard: (5.0mm) (10.2mm) (15.2mm)* TAPE LEADER: A (300mm) minimum length leader is provided before the first capacitor and after the last capacitor. INTERRUPTION OF SEQUENCE: No consecutive capacitors may be absent. Total empty spaces <0.1% of reel. SPLICES: Spliced tape strength is equal to non-spliced tape. Staples will not be used for splicing. Splice offset <(0.80mm) Splice overlap >(50.8mm) REFERENCE STANDARDS: EIA RS296E BODY SIZE vs. PITCH Body Diameter (D) L1 L L2 D P * K mm ≤5.0 ≤10.0 F >10.0 Pitch* (P) 5.0 10.0 15.0 Pitch Tolerance ±0.5 ±0.5 ±0.5 *NOTES: Maximum body diameter must be less than nominal component pitch Please contact IC directly for all special requirements t C1 TYPICAL PACKAGING QUANTITIES Reel Quantity Diameter (Max.) t0 W LEAD TAPING SPECIFICATIONS mm <5.0 2,000 Body Length ≤16.5 ≤28.45 <7.0 1,500 Inside Tape (W) 52.4 63.5 <10.0 1,000 Tolerance Inside (W) ±1.5 <13.0 400 Lead Extension (K) 0.80 Max. Centering Tolerance ±1.40 REEL PACKAGING + A C Lead into Tape 1/2 t Min. Tape Width (t) 5.0 to 6.35 Exposed Adhesive (t0) .80 Max. Lead Bend Alignment (F) 1.2 Max. Overall Width (C1) D 73.0 123.5 Max REEL DIMENSIONS (mm) MIN. MAX. Outside Diameter (D) 76.2 355.6 Core Diameter (C) 34.9 92.1 13.9 38.1 Arbor Hole Diameter (A) B >28.45 Inside Flange (B) 1.5 to 8.0 over C1 Dim. NOTE: Dimensions will vary according to specific capacitor styles, quantities and customer specifications. IC will furnish specific details upon request. ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 122 RADIAL LEAD CUT & FORM SPECIFICATION Special Order Options Formed Leads Not Cut L L L Style F# Style M# Style N# 5 Max 5 Max 5 Max 15 Min 15 Min 15 Min S0–1 S0–1 S0–1 CODES FOR FORMED LEAD SPACING (S 0) Initial Lead Spacing (S) 7.5 10 15 20 22.5 Formed lead spacing (So) available Initial Lead Spacing (S) 4, 5, 6, 7.5, 10, 12.5 27.5 4, 5, 6, 7, 7.5, 10, 12.5, 15 32.5 5, 6, 7, 7.5, 10, 12.5, 15, 17.5, 20 37.5 10, 12.5, 15, 17.5, 20, 22.5, 25 42.5 12.5,15, 17.5, 20, 22.5, 25, 27 Formed lead spacing (So) available Formed Formed Lead Lead Lead Formed lead lead Forming Forming lead Forming spacing Code spacing Code spacing Code (So) (So) (So) 17.5, 20, 22.5, 25, 27.5, 30, 32.5 22.5, 25, 27.5, 30, 32.5, 37.5 27.5, 30, 32.5, 37.5, 42.5 32.5, 37.5, 42.5 4.0 5.0 6.0 7.0 7.5 10.0 29 01 26 27 02 03 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 37.5 42.5 04 05 06 07 08 09 11 12 13 15 21 Unit: mm Cut & Formed Leads L L L L Style CC# Style CF# Style CM# Style CN# 5 Max 5 Max 5 Max 5 Max 5 Max 5 Max 5–1 S S0–1 S0–1 S0–1 Example 104MSR400K with cut leads and lead spacing (S0) to 10 mm Part number would be 104MSR400KCM03 ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 123