Axial film tape and reel.

Film Capacitors
AXIAL LEAD TAPING SPECIFICATIONS
GENERAL SPECIFICATIONS
BODY SIZE: Maximum Diameter: (13mm)
PITCH: Standard: (5.0mm)
(10.2mm)
(15.2mm)*
TAPE LEADER: A (300mm) minimum length leader is provided before the first capacitor and after the last capacitor.
INTERRUPTION OF SEQUENCE: No consecutive capacitors
may be absent. Total empty spaces <0.1% of reel.
SPLICES: Spliced tape strength is equal to non-spliced tape.
Staples will not be used for splicing.
Splice offset <(0.80mm)
Splice overlap >(50.8mm)
REFERENCE STANDARDS: EIA RS296E
BODY SIZE vs. PITCH
Body Diameter (D)
L1
L
L2
D
P
*
K
mm
≤5.0
≤10.0
F
>10.0
Pitch* (P)
5.0
10.0
15.0
Pitch Tolerance
±0.5
±0.5
±0.5
*NOTES:
Maximum body diameter must be less than nominal component pitch
Please contact IC directly for all special requirements
t
C1
TYPICAL PACKAGING QUANTITIES
Reel
Quantity
Diameter
(Max.)
t0
W
LEAD TAPING SPECIFICATIONS
mm
<5.0
2,000
Body Length
≤16.5
≤28.45
<7.0
1,500
Inside Tape (W)
52.4
63.5
<10.0
1,000
Tolerance Inside (W)
±1.5
<13.0
400
Lead Extension (K)
0.80 Max.
Centering Tolerance
REEL PACKAGING
+
A
C
B
D
73.0
±1.40
Lead into Tape
1/2 t Min.
Tape Width (t)
5.0 to 6.35
Exposed Adhesive (t0)
.80 Max.
Lead Bend Alignment (F)
1.2 Max.
Overall Width (C1)
>28.45
123.5 Max
REEL DIMENSIONS (mm)
MIN.
MAX.
Outside Diameter (D)
76.2
355.6
Core Diameter (C)
34.9
92.1
Arbor Hole Diameter (A)
13.9
38.1
Inside Flange (B)
1.5 to 8.0 over C1 Dim.
NOTE: Dimensions will vary according to specific capacitor styles, quantities and
customer specifications. IC will furnish specific details upon request.
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com
162