ORIENTATION OF POLARITY: All polarized capacitors must be oriented in the same direction. INTERRUPTION OF SEQUENCE: No consecutive capacitors may be absent. Empty spaces <0.1% of reel quantity. SPLICES: Splice tape strength must be equal to Non-splice tape. Splice thickness: <4 single tape layers Splice offset: <0.3 mm REFERENCE STANDARD: EIA RS 468A Formed lead Straight lead Formed lead spacing 4.0 5.0 5.0 6.3 8.0 10.0 12.5 16/18 12.5 Tol. 5.0 1.5/2.5 2.0/2.5 2.5 3.5 5.0 5.0 7.5 7.5 +0.8/-0.2 Taping code SA ST1/ ST ST2/ ST ST SF SA SA SQ SH Capacitor Pitch (P) 12.7 12.7 25.4 15.0 15.0 +1.0 Feed hole pitch (Po) 12.7 12.7 12.7 15.0 15.0 +0.3 Feed hole to first lead (P1) 3.85 Carrier width (W) 18.0 9 Lead spacing (S) Feed hole position (W1) Height of seating plane (H) Lead wire clinch Height (H0) 17.5 Clinch Height(K) 1.5 6.3 18.5 8.0 Straight lead spacing 4.0 Case Diameter (D) 5.1 18.5 20.0 2.5 3.75 +0.7 18 18.0 +0.5 9.0 9.0 +0.5 18.5 16.0 2.5 4.6 4.0 18.5 18.5 16.0 21 MAX ----- ---- +0.5 ----- ---- Nom Feed Hole Diameter (D0) 4.0 4.0 4.0 +0.3 Lead Protrusion (L) 11.2 11.2 11.2 MAX Front to Back inclination ∆h 0.0 0.0 0.0 +2.0 Body inclination ∆h1 0.0 0.0 0.0 +2.0 Tape thickness (t) 0.7 0.7 0.7 +2.0 Box Quantity Box Dimensions (mm) L (MAX) 340 H (MAX) 360 T (MAX) 65 Diameter 4.0 5.0 6.3 8.0 10 12.5 12.5 16 18 Po 12.7 12.7 12.7 12.7 12.7 12.7 15 15 15 Quantity 2000 2000 2000 1000 800 400 500 300 243