Sensor Selection Guide Simple to specify, install and use. Sophisticated monitoring. Energy-efficient control for long-term savings. www.usa.siemens.com/hvac Temperature Humidity Air Quality Pressure Specialty Indoor air quality, carbon dioxide emissions, energy efficiency… so many of the world’s most sophisticated buildings are successfully monitored by Siemens sensors. Whether your applications are for warehouses or clean rooms, sensors utilize leading-edge technology and are manufactured to meet ISO-9001 standards for signal strength, accuracy and reliability. They can be quickly installed and put into operation — so your investment pays off right from the start by providing significant savings on startup, service and operating costs. Fully tested and in-depth applications expertise guarantee out-of-the-box, long-lasting performance and full compatibility with all Siemens HVAC controllers and building automation systems. Table of Contents Intro Handling Today’s Rigorous Building Demands. . . . . . . . . . . . 4 Temperature Room. . . . . . . . . . . . . . . . . . . . . . 7 Outdoor Air . . . . . . . . . . . . . . . . . 7 Duct. . . . . . . . . . . . . . . . . . . . . . . 8 Immersion. . . . . . . . . . . . . . . . . . 9 Strap-on. . . . . . . . . . . . . . . . . . . 10 Cable. . . . . . . . . . . . . . . . . . . . . 10 Accessories . . . . . . . . . . . . . . . . 11 Humidity Room. . . . . . . . . . . . . . . . . . . . . Room Hygrostats. . . . . . . . . . . . Outdoor Air . . . . . . . . . . . . . . . . Duct Humidity. . . . . . . . . . . . . . Dew Point . . . . . . . . . . . . . . . . . Duct Hygrostats. . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . 13 13 14 14 15 15 15 Air Quality Room. . . . . . . . . . . . . . . . . . . . . 17 Duct. . . . . . . . . . . . . . . . . . . . . . 17 Pressure Liquid/Gas . . . . . . . . . . . . . . . . . Refrigerant. . . . . . . . . . . . . . . . . Air Pressure . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . 19 20 21 21 Specialty Solar Impact. . . . . . . . . . . . . . . . 23 Liquid Flow Switches. . . . . . . . . 23 Air Velocity. . . . . . . . . . . . . . . . . 23 Easy, Accurate and Cost-Effective Control… Precisely What You Need to Handle Today’s Rigorous Building Demands With incredibly precise and accurate readings, Siemens sensors provide an optimal basis for energy- and cost-efficient control of entire HVAC systems. They are highly reliable and designed for simple, standardized, cost-saving installation with low cabling effort and fast startup. 4 www.usa.siemens.com/hvac An Unmatched Range of Sensors That Handle Every HVAC Need Whether your applications are warehouses or clean rooms, our complete range of sensors measure temperature, pressure, humidity or air quality in rooms, ducts or outside areas. The sensor range also includes multi-sensors that measure mixed gases, as well as sensors for special areas, such as in the pharmaceutical industry. Utilizing leading-edge technology, our sensors are manufactured to meet ISO9001 standards for signal strength, accuracy and long-life reliability. Tested applications ensure peak performance operation and full compatibility with all Siemens HVAC controllers. In addition, the connection to standard commercial thirdparty systems is always an option thanks to standardized output signals. Functional Modular Design, Digital Technology, Optimum Comfort We offer a sleek line of polycarbonate as well as a standard line of metal housings. Our polycarbonate sensors feature a modular design for an easy-to-understand, clearly structured product range that meets all requirements of your building services facility. The clever design and powerful, digital compensating algorithms of the polycarbonate range effectively suppress electrical interference, enabling the sensors to deliver unambiguous measuring signals in all situations. The sensors allow energy-efficient, demand-controlled ventilation for optimum room quality and comfort. They automatically compensate for changes in building occupancy, building usage or plant characteristics. The measured value display on Siemens multi-sensors makes them even more convenient. The LCD display alternately indicates the different measured temperature, humidity, and air quality readings. Straightforward Mounting and Commissioning No special training is required, so you can easily mount and commission these devices. Sustainable Packaging As an organization, Siemens Building Technologies places a high priority on reducing its products’ negative environmental impact through simplicity and practicality in manufacturing, packaging and labeling. Ready to Deliver With Immediate and Long-term Benefits • Noticeable energy savings thanks to fast, high-precision measurement and efficient measuring techniques • Innovative sensor technology with self-monitoring, service mode, integrated installation concept, and functional design • High level of comfort provided by demand-controlled ventilation • Multi-sensors reduce installation and cabling effort • Guaranteed quality — the result of many years of experience, in-depth applications expertise, and systematic sensor tests • The Siemens line of sensors is broader and deeper than any other manufacturer. Having one source for sensors simplifies your ordering process and makes maintenance easier for years to come www.usa.siemens.com/hvac 5 Temperature Sensors Reliability, accuracy, and optimum comfort at any location A complete selection of room, outside air, duct and pipe temperature sensors costeffectively deliver superior performance. This extensive offering provides a wide range of features and functionality to deliver exceptional occupant comfort — in even the most demanding environments. All sensors incorporate precision temperature sensing elements for long-lasting accuracy and reliability. Mounting and commissioning is quick and easy, requiring no calibration or maintenance and delivering a fast return on investment. Active and resistive output signals precisely monitor all types of HVAC systems. The active sensors, available in 0 to10 Vdc or 4 to 20 mA output signals, quickly adapt to the situation at hand. Numerous RTD or NTC thermistor resistive signal output options ensure easy integration with a building automation system. The standard line of metal housing sensors incorporates a temperature-sensing element behind a brushed stainless steel finish cover plate. Sleekly designed and compact polycarbonate housings feature sensing only variants, as well as models with temperature setpoint LCD display and night set back. The housing on the room models optimizes airflow through its cover for fast measurement response and superior control. 6 n n n QAC2012U QAC2012U QAC2020U QAC2021U QAC2030U QAC2032U QAC2012 QAC2030 QAC3161 QAC3171 QAC22 536-768 n n n n n n n n n Degree F LCD Display Bi-Metal Display 4 to 20 mA 0 to 10 Vdc NTC 10K Type III NTC 10K Type II RTD 1K Pt (375) n n -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -58 to 158 -40 to 158 -58 to 122 -58 to 122 -58 to 158 -58 to 122 Polycarbonate Metal 24 Vdc 24 Vac Certified Standard Basic QAC3161 Range RTD 1K Pt (385) RTD 1K Ni at 70º F Output RTD 1K Ni at 32º F Part Number n n QAC2012 Category Power n n n n n n n Housing Polycarbonate n n n n n n n n Metal n n n n n n n n n n n n n n n n 24 Vdc n n n n n n Housing n n n n n 24 Vac n Power Certified n n Degree F LCD Display Bi-Metal Display n 544-973 Category 55 to 95 55 to 95 55 to 95 55 to 95 55 to 95 55 to 95 55 to 95 55 to 95 55 to 95 55 to 95 55 to 95 55 to 95 n n Outdoor Air Sensors Available in a variety of signal types, outdoor air temperature sensors monitor and transmit changes to building control systems. In addition to acquiring outside temperature, outdoor air sensors measure wind, wall temperature, and solar radiation, to help keep heating systems working efficiently. Active output signals in 0 to 10 Vdc or 4 to 20 mA and numerous resistive signals output versions in 10K Ohm NTC or 1K Ohm Platinum (375 and 385) RTD ensure compatibility. Setpoint / Override 4 to 20 mA 0 to 10 Vdc NTC 10K Type III NTC 10K Type II RTD 1K Pt (375) RTD 1K Pt (385) Range Standard QAA2312.EWNN QAA2320.EWNN QAA2321.EWNN QAA2330.EWNN QAA2332.EWNN QAA2312.BWNN QAA2320.BWNN QAA2321.BWNN QAA2330.BWNN QAA2332.BWNN 544-973 540-984 RTD 1K Ni at 70º F Output Setpoint / Override Flush mount sensors (544-973 and 540-984) incorporate a temperaturesensing element (10K Ohm Type II Thermistor, or 1000 Ohm RTD) behind a blank, stainless steel or plastic switch cover plate for seamless wall integration. Part Number RTD 1K Ni at 32º F These sensors provide precise, stable temperature sensing, ensuring the highest possible level of comfort. The sensor’s resistance varies with the actual room temperature being measured. QAA2330.BWNN Basic QAA2330.EWNN Room Temperature Sensors n n n n n n n n n n n n n n n n n www.usa.siemens.com/hvac n 7 8 www.usa.siemens.com/hvac n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n 4 in. 8 in. 18 in. 8 ft. 16 ft. 24 ft. 4 in. 8 in. 18 in. 16 ft. 24 ft. 8 in. 18 in. 24 ft. 4 in. 8 in. 18 in. 8 ft. 16 ft. 24 ft. 4 in. 8 in. 18 in. 8 ft. 16 ft. 24 ft. 16 in. 6.5 ft. 6.5 ft. 20 ft. 16 in. 16 in. 16 in. 4 in. 8 in. 18 in. 4 in. 8 in. 18 in. 8 ft. 16 ft. 24 ft. 4 in. 8 in. 18 in. n Housing Polycarbonate Length Metal Certified Power Sensor Probe n n n n n Standard n n n n n n n n n n n n n -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -58 to 176 -58 to 176 -58 to 176 -58 to 176 -58 to 176 -58 to 122 -58 to 122 20 to 120 20 to 120 20 to 120 30 to 250 30 to 250 30 to 250 20 to 120 20 to 120 20 to 120 -4 to 122 -4 to 122 -4 to 122 n n n n n n Basic 0 to 10 Vdc NTC 10K Type III NTC 10K Type II RTD 1K Pt (375) RTD 1K Pt (385) RTD 1K Ni at 70º F Category 533-380 24 Vdc QAM2012.010 QAM2012.020 QAM2012.045 QAM2012.250 QAM2012.500 QAM2012.750 QAM2020.010 QAM2020.020 QAM2020.045 QAM2020.500 QAM2020.750 QAM2021.020 QAM2021.045 QAM2021.750 QAM2030.010 QAM2030.020 QAM2030.045 QAM2030.250 QAM2030.500 QAM2030.750 QAM2032.010 QAM2032.020 QAM2032.045 QAM2032.250 QAM2032.500 QAM2032.750 QAM2112.040 QAM2112.200 QAM2120.200 QAM2120.600 QAM2130.040 QAM2161.040 QAM2171.040 533-376-4 533-376-8 533-376-18 533-377-4 533-377-8 533-377-18 533-380-8 533-380-16 533-380-24 544-560-4 544-560-8 544-560-18 Range Degree F Analog sensors (533 and 544) provide input for accurate looppowered temperature sensing (detecting) for controllers via a 20 AWG twisted, shielded cable pair. The loop current varies according to the temperature being measured. Output 4 to 20 mA For versions in metal housings, standard lengths are 8’, 16’, and 24’ for duct averaging; 4", 8", and 18" for duct point. Part Number RTD 1K Ni at 32º F Measuring conditions in air ducts are hardly ever ideal. Ruggedly constructed duct point and averaging sensors are available in a variety of models to meet specific mounting requirements and sensing applications. Averaging ensures that temperatures are acquired more reliably and independent of the measuring location and airflow conditions. Active output signals in 0 to 10 Vdc or 4 to 20 mA and numerous resistive signal output versions in 10K Ohm NTC or 1K Ohm Platinum (375 and 385) RTD ensure compatibility. QAM2112.040 24 Vac QAM2030.045 Duct Temperature Sensors n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n QAE2012.005 QAE2012.010 QAE2012.015 QAE2020.005 QAE2020.010 QAE2020.015 QAE2021.005 QAE2021.010 QAE2021.015 QAE2030.005 QAE2030.010 QAE2030.015 QAE2032.005 QAE2032.010 QAE2032.015 QAE2112.0101 QAE2112.0151 QAE2130.0101 QAE2130.0151 QAE2164.0101 QAE2164.0151 QAE2174.0101 QAE2174.0151 QAE26.9 544-562-25 544-562-40 544-562-60 536-774-25 536-774-40 536-774-60 536-767-25 536-767-40 536-767-60 544-577-25 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -22 to 266 -22 to 266 -22 to 266 -22 to 266 4 to 248 4 to 248 4 to 248 4 to 248 -40 to 170 32 to 212 32 to 212 32 to 212 20 to 70 20 to 70 20 to 70 30 to 250 30 to 250 30 to 250 -40 to 240 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n 2.5" 4" 6" 2.5" 4" 6" 2.5" 4" 6" 2.5" 4" 6" 2.5" 4" 6" 4" 6" 4" 6" 4" 6" 4" 6" 10" 2.5" 4" 6" 2.5" 4" 6" 2.5" 4" 6" 2.5" Polycarbonate Housing Cable (ft.) Length Sensor Probe (in.) 24 Vdc Power 24 Vac Certified Standard Category Basic Degree F LCD Display Bi-Metal Display Setpoint / Override 4 to 20 mA 0 to 10 Vdc NTC 10K Type III NTC 10K Type II RTD 1K Pt (375) Range RTD 1K Pt (385) Output RTD 1K Ni at 70º F Part Number RTD 1K Ni at 32º F The immersion sensors are designed for high accuracy and are available with or without an immersion well. Active output signals in 0 to 10 Vdc or 4 to 20 mA and numerous resistive signal output versions in 10K Ohm NTC or 1K Ohm Platinum (375 and 385) RTD ensure compatibility. Standard lengths are 2.5", 4" and 6". Immersion sensors are simply snapped into place in preinstalled immersion wells. 536-767-25 Metal QAE2122.015 Immersion Temperature Sensors n n n n n n n n n n n n n n n n n n n n n n n 4' n n n n n n n n n n 1. Without immersion well. See accessories on page 7 for immersion well. www.usa.siemens.com/hvac 9 n n n n n n n n n n n n n QAP1030.200 QAP21.3 QAP22 QAH11.1 www.usa.siemens.com/hvac Category Length n Certified n -4 to 158 Standard 6.5' 5' 6.5' Basic n n n n Degree F -13 to 203 -22 to 266 -13 to 203 3" n n NTC 10K Type III 8' NTC 10K Type II 3" RTD 1K Pt (375) n RTD 1K Pt (385) -40 to 240 n 3" 8' Polycarbonate n n n Description Cable (ft.) Range Sensor Probe (in.) RTD 1K Ni at 70º F Output RTD 1K Ni at 32º F Part Number QAM1030.008P50 10 n n n n n QAP Cable Sensors The cable sensors feature rugged construction and are available in several versions for a wide range of use. Housing Certified Standard n -40 to 240 -40 to 240 -40 to 240 -40 to 240 -40 to 240 -22 to 266 -22 to 257 30 to 250 n n Basic Degree F 0 to 10 Vdc NTC 10K Type III NTC 10K Type II RTD 1K Pt (375) Category 4 to 20 mA QAD2012U QAD2020U QAD2021U QAD2030U QAD2032U QAD2012 QAD2030 536-780 Range RTD 1K Pt (385) Output RTD 1K Ni at 70º F Part Number RTD 1K Ni at 32º F These sensors excel in retrofit applications with their ease of mounting. Simply use the supplied clamping strip or strap and sensors are quickly and securely positioned, covering most pipe diameters. Available in 4 to 20 mA and numerous resistive signal outputs. 536-780 Metal QAD2012 Strap-on Sensors Duct Temperature Sensor, for Commissioning Only. 50 per Package. PVC Cable Silicone Cable PVC Cable Connectors, 23º F, if Cable is Flex Mounted ARG22.1 Accessories Description Range Length AQE2012 Repair Kit for Metal Immersion Sensors QAE2012U — Includes Element and Transmitter -40 to 240 AQE2020 Repair Kit for Metal Immersion Sensors QAE2020U — Includes Element and Transmitter -40 to 240 AQE2021 Repair Kit for Metal Immersion Sensors QAE2021U — Includes Element and Transmitter -40 to 240 AQE2030 Repair Kit for Metal Immersion Sensors QAE2030U — Includes Element and Transmitter -40 to 240 AQE2032 Repair Kit for Metal Immersion Sensors QAE2032U — Includes Element and Transmitter -40 to 240 AQE2000.005 Immersion Well for Metal Immersion Sensors QAE20xxU.005 2.5" AQE2000.010 Immersion Well for Metal Immersion Sensors QAE20xxU.010 4" AQE2000.015 Immersion Well for Metal Immersion Sensors QAE20xxU.015 6" AQE2102 Compression Fitting for use with Immersion Sensors QAE21xx ARG22.1 Changeover Kit for QAPxx ARG100U Immersion Well for Polycarbonate Immersion Sensors QAE21xx.010 4" ARG150U Immersion Well for Polycarbonate Immersion Sensors QAE21xx.015 6" 187-120 Mounting Flange (Gasket) for QAM20xx Duct Point Types 6" 536-774-RK Repair Kit for Metal Immersion Sensors 536-774-xx — Includes Element and Transmitter 20 to 70 536-767-RK Repair Kit for Metal Immersion Sensors 536-767-xx — Includes Element and Transmitter 30 to 250 544-562-RK Repair Kit for Metal Immersion Sensors 544-562-xx — Includes Element and Transmitter 32 to 212 www.usa.siemens.com/hvac Sensor Probe (in.) Part Number Degree F Siemens sensors are designed to install and get to work quickly. A wide range of sensing products and accessories make mounting and maintenance even easier. 11 Humidity Sensors Comfort and stability, even under difficult conditions Engineered for long-life and durability, Siemens humidity sensors are guaranteed to perform and provide energy-efficient monitoring. Impervious to dust and most chemicals, Siemens sensors conform to rigorous FDA standards and meet the especially high requirements necessary for HVAC, pharmaceutical, food, paper, clean room facilities, and other critical applications. Each sensor’s capacitive measurement element provides incredibly high accuracy, freedom from maintenance, and ongoing precise repeatability. Microprocessor technology and a sophisticated algorithm for temperature compensation ensure very high accuracy over the entire measurement range. Combined temperature/humidity sensors offer exceptional flexibility and savings potential. They feature three defined measurement ranges that adjust easily and without the need for additional tools: 32 to 122°F, -31 to 95°F, or -40 to 158°F. 12 High-Quality/Certified Standard Accuracy ± 2% Relative Humidity ± 5% Relative Humidity Operating Range 0 to 100% Relative Humidity 0 to 95% Relative Humidity QFA3160 n n n n n n n n n n n n 2% Certified -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n QFA1000 Room Hygrostats White PC Lexan 940 Housing 24 Vac Power 5% Category Degree F Range % Relative Humidity QFA1000 QFA1001 Output Relay Version Exposed Setpoint Part Number Concelaed Setpoint Hygrostats with potential-free microswitch (SPDT) are used for controlling and monitoring minimum or maximum relative humidity levels in ventilation or air conditioning facilities. They ensure room humidity control within the selectable range of 30 to 90% relative humidity by controlling humidification or dehumidification equipment. The humidity measuring element is made of stabilized plastic. Setpoint knob adjusts and controls the upper switching point. Mount directly on the wall or in a recessed conduit box. Housing Polycarbonate n n n n n n n n 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 Power 13.5 to 35 Vdc n 2% LCD Display RTD 1K Pt (385) 4 to 20 mA n Category Degree F n n n n n n n n n n Range % Relative Humidity QFA3100 QFA3101 QFA3160 QFA3160D QFA3171 QFA3171D QFA4160 QFA4160D QFA4171 QFA4171D Output 0 to 10 Vdc Version Humidity / Temp. Part Number Humidity Only Room Relative Humidity and Relative Humidity/Temperature Sensors monitor and transmit changes in humidity and temperature to the building control systems. High quality 2% and 2% certified sensors are not only exact at 73°F room temperature, but across the entire operating range of -40° to 158°F. The humidity only units are available in either 0 to 10 Vdc or 4 to 20 mA outputs. Combination humidity and temperature units are available in either dual current or voltage versions, transmitting proportional signals back to the controller. Liquid Crystal Display shows Fahrenheit or Celsius readings. QFA3160D 24 Vac Room Humidity Sensors n n n 30 to 90 30 to 90 32 to 122 32 to 122 n n n n n n n www.usa.siemens.com/hvac 13 n n n n 14 n n n n 24 Vac n n n n QFM2160 QFM21001 QFM21011 QFM21601 QFM21711 QFM31001 QFM31011 QFM31601 QFM3160D1 QFM31711 QFM3171D1 QFM41601 QFM41711 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n 0 to 95 0 to 95 0 to 95 0 to 95 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 n n n n 5 to 140 5 to 140 -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 n n n n n n n n n n n n n n n n n n n Power 5% 2% Certified 2% Category Degree F % Relative Humidity LCD Display Relay Contact 4 to 20 mA Range n 1. Include mounting accessories. www.usa.siemens.com/hvac Output 0 to 10 Vdc Humidity / Temp. Version Humidity Only Part Number n n n n n n QFM3160D 24 Vac Duct Humidity Sensors Relative Humidity and Relative Humidity/Temperature sensors monitor and transmit changes to building control systems for precise control. Several models are available for humidity only (in 5%, 2% and 2% certified) or for humidity and temperature sensing (also in 5%, 2% and 2% certified versions). All 2% and 2% certified versions feature a removable, replaceable sensing tip. The humidity only units are available in either 0 to 10 Vdc or 4 to 20 mA outputs. Combination humidity and temperature units are also available in either dual current or voltage versions, transmitting proportional signals back to the controller Liquid Crystal Display versions show Fahrenheit or Celsius readings. 2% Certified -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 -40 to 158 Housing Polycarbonate n n n n 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 Power n Housing Polycarbonate n 2% 4 to 20 mA 0 to 10 Vdc n Category QFA3xx with AQF3100 13.5 to 35 Vdc n n n n Range Degree F QFA3100 QFA3101 QFA3160 QFA3171 QFA4160 QFA4171 Output % Relative Humidity Version Humidity Only Part Number Humidity / Temp. Standard models available are 2% and 2% certified, for both humidity only and combination humidity with temperature sensing. A removable, replaceable sensing tip enables these sensors to be recalibrated within seconds. Sensors are offered with either 0 to 10 Vdc or 4 to 20 mA outputs. (AQF3100 Sold separately on page 11) 13.5 to 35 Vdc Outdoor Air Humidity Sensors n n n n n n n n n n n n n n n n n n n n n n n n QXA2000 Dew Point Sensor QXA2000 n 13.5 to 35 Vdc 24 Vac Degree F 0 to 100 n Housing n n QFM81.21 Duct Hygrostats 24 Vac White PC Lexan 940 Housing n n n 15 to 95 15 to 95 32 to 158 32 to 158 n n n n n n n AQF3150 Part Number AQY2010 AQY2030 AQF3100 AQF3150 Power 5% Category Degree F Range % Relative Humidity Output Relay QFM81.2 QFM81.21 Accessories Whether you’re looking for remote mounting cable or a sun shield to protect a sensor from damaging rays, find what you need from Siemens. Version Internal Setpoint Part Number External Setpoint On/off hygrostats with potential-free microswitch (SPDT) are used for controlling humidification and dehumidification equipment. The temperature-compensated humidity sensor obtains temperature-independent humidity measurements. Stabilized sensing strip provides good linearity, remains very stable even at high humidity, and is insensitive to dust and contaminated air. Field calibration possible. Polycarbonate Power % Relative Humidity LCD Display 4 to 20 mA Range Relay Contact Output 0 to 10 Vdc Version Temperature Part Number Humidity Used to monitor condensation on chilled ceilings, this sensor provides potential-free relay output with a switching point at 95% ± 4% RH and a fast response time. AQF3100 Description 10' Cable for Remote Mounting of QFA31xx, QFA41xx, QFM31xx and QFM41xx Removable Sensor Tip 30' Cable for Remote Mounting of QFA31xx, QFA41xx, QFM31xx and QFM41xx Removable Sensor Tip Sun Shield — for use with Outdoor Air Humidity Sensors Replacement Tip Duct Relative Humidity & Temperature Sensors www.usa.siemens.com/hvac 15 Air Quality Sensors Energy-savings and superior room quality and comfort in an easy-to-install design Studies indicate demand-controlled ventilation offers energy savings of up to 70% by ensuring constant levels of indoor air quality and low operating costs. With Siemens sensors, optimized indoor air quality and maximized energy savings are achieved by measuring CO2 and VOC (Volatile Organic Compounds) and implementing demandcontrolled ventilation strategies. Like all Siemens sensors with active output signals, the indoor air quality range has a built-in self-monitoring capability for all measuring variables. The non-dispersive infrared CO2 sensor experiences less than 1% drift per year for the first two years of operation and negligible drift thereafter, so no calibration is necessary. In addition, the sensors can be switched to a special service mode, offering additional convenience for project development and commissioning. These sophisticated sensors are housed in an aesthetically appealing modular housing to meet the specifying recommendation of architects and eliminate the need to install multiple room sensors close to each other. Measurement Range 16 CO2 0 to 2000 ppm Humidity 0 to 95% Relative Humidity Temperature -58 to 122°F or -31 to 95°F (0 to 50°C or -35 to +35°C) QPA2000 Room Air Quality Sensors n n n n Passive† Passive† n n n n n n n n n n n n n n n n n n n n n n n n n n n n % Relative Humidity Temperature 23 to 113°F CO₂ 0 to 2000 ppm No Logo LCD Display n 0 to 95 0 to 95 Housing Polycarbonate Active Active Active Active 0 to 5 / 0 to 10 Vdc Humidity n n n n n n n n n n n n n n n n n Power 15 to 35 Vdc n n n n n n n n n n Range 24 Vac QPA2000 QPA2000N QPA2002 QPA2002D QPA2002N QPA2060 QPA2060D QPA2060N QPA2062 QPA2062D QPA1000 QPA1000N QPA2080 QPA2080D Output Temperature Version VOC Part Number CO₂ Precise and compact, Siemens’ broad range of CO2, CO2/VOC, CO2/Temp, or CO2/Temp/RH sensors reduce installation, wiring and commissioning costs. Standard output signals facilitate straightforward connection to a wide choice of controllers and systems. A built-in test function performs troubleshooting. Versions are available with a clear, attractive Liquid Crystal Display that alternates measuring variables and their units. Maximum selection of the CO2 and VOC concentrations is shown in the form of a bar graph and temperature can switch from Fahrenheit to Celsius. QPA2060D n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n † Selectable Resistances included: Pt 100, Pt1000, LG-Ni 1000, NTC 10k QPM2102D Duct Air Quality Sensors n n n n n n n n n n n n n n n n n n n n % Relative Humidity Temperature 31 to 113°F CO₂ 0 to 2000 ppm No Logo LCD Display n 0 to 95 0 to 95 Housing Polycarbonate Active Passive† Active Active Active 0 to 5 / 0 to 10 Vdc Humidity n n n n n n n n n n n n Power 15 to 35 Vdc n n n n n n n n n Range 24 Vac QPM2100 QPM2100N QPM2102 QPM2102D QPM2160 QPM2180 QPM2160D QPM2162 QPM2162D QPM1100 Output Temperature Version VOC Part Number CO₂ Fast, secure, and cost-efficient installation, this line utilizes a true duct housing, eliminating the need for a mounting kit or aspiration box. An adjustable immersion depth accommodates all mounting situations. No alignment with the flow direction is required — there’s no sensitivity to air from outside the air duct. Since two completely separate compartments are used for the measurement modules and the connection terminals, the measurement cannot be falsified by air leakage. Liquid Crystal Display versions provide local visual and numeric information to the occupant in the controlled or monitored space. QPM2162 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n † Resistance included: Pt 100, Pt1000, LG-Ni 1000, NTC 10k www.usa.siemens.com/hvac 17 Pressure Sensors Covers the entire spectrum of HVAC applications with accuracy and stability Siemens covers the range of pressure measurement requirements with sensors that measure very low to high pressures in liquids, gases, water, refrigerants, and air. Versions offer either a 0 to 10 Vdc or 4 to 20 mA analog output that is compatible with all energy management systems. Measurement cells are matched precisely to the pressure range, further enhancing measurement accuracy and eliminating the need for temperature or pressure calibration. The individually laser-adjusted pressure difference for air and non-aggressive gases utilizes a patented ceramic lever system. This enables highly accurate pressure measurement that remains stable over a long period, even in highly dynamic processes and through frequent operating cycles. 18 QBE2002-P n n n n n n n n n n n n n n n n n n n n n n n n n n n n www.usa.siemens.com/hvac Vdc Power 24 Vac 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Category High Quality 0 to 14.5 0 to 29 0 to 58 0 to 72 0 to 145 0 to 232 0 to 58 0 to 15 0 to 30 0 to 60 0 to 100 0 to 150 0 to 200 0 to 300 0 to 15 0 to 30 0 to 60 0 to 100 0 to 150 0 to 200 0 to 300 QBE64-DP4 Standard Percentage n n n n n n n Accuracy PSII n n n n n n n n n n n n n n Adjustable n n n n n n n n n n n n n n LCD Display n n n n n n n n n n n n n n Pressue Relay Contact 4 to 20 mA QBE2002-P1 QBE2002-P2 QBE2002-P4 QBE2002-P5 QBE2002-P10 QBE2002-P16 QBE64-DP4 7MF15654BB005EA1 7MF15654BE005EA1 7MF15654BF005EA1 7MF15654BG005EA1 7MF15654CA005EA1 7MF15654CB005EA1 7MF15654CD005EA1 7MF15654BB105EA1 7MF15654BE105EA1 7MF15654BF105EA1 7MF15654BG105EA1 7MF15654CA105EA1 7MF15654CB105EA1 7MF15654CD105EA1 Output 0 to 10 Vdc Version Differential Part Number Absolute Providing measurements that are unaffected by changes in temperature, these robust pressure sensors for liquids and gases are based on a stainless steel, piezo-resistive measuring system. They are ideally suited for the measurement of static and dynamic overpressures with intensive load change. Their fully encapsulated electronics design permanently protects them against the effects of temperature and humidity. They are available in several different air pressure ranges, from 1 to 40 atmospheres of pressure (1 to 580 psi) with 0 to 10 Vdc and 4 to 20 mA output signals. Basic Liquid/Gas Pressure Sensors 18 to 33 18 to 33 18 to 33 18 to 33 18 to 33 18 to 33 18 to 33 15 to 36 15 to 36 15 to 36 15 to 36 15 to 36 15 to 36 15 to 36 10 to 36 10 to 36 10 to 36 10 to 36 10 to 36 10 to 36 10 to 36 19 QBE2x01-P Refrigerant Pressure Sensors 20 n n -14.5 to 130 -14.5 to 348 n n Power High Quality Standard Category Basic Percentage PSII Adjustable LCD Display Relay Contact 4 to 20mA Accuracy Vdc n n Pressure 24 Vac QBE2001-P10U QBE2001-P25U Output 0 to10 Vdc Version Differential Part Number Relative Designed for refrigeration areas, Siemens pressure sensors feature a stainless steel membrane that is welded to the housing, eliminating the need for a seal. This enables use with all refrigerants, even ammonia and carbon dioxide, as well as with high process temperatures and aggressive media. n n 16 to 33 16 to 33 With 10 psi proof pressure on all ranges, they are available in five different air pressure ranges. Static accuracy is ±1% full scale in normal ambient temperature environments. The units are temperature compensated to less than ±0.033% FS/°F of thermal error over the temperature range of 0°F to +150°F. 1% accuracy, or better, improves variable air volume system performance. QBM81-31 QBM81-51 QBM81-101 590-501 590-502 590-503 590-505 590-5062 590-5072 590-5082 590-5102 590-780 590-781 590-782 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n 0.08 to 1.2" 0.2 to 2.0" 0.4 to 4.0" 0 to 5" 0 to 2" 0 to 1" 0 to +/- 0.25" 0 to 5" 0 to 2" 0 to 1" 0 to +/- 0.25" 0 to 1" 0 to 0.65" 0 to 0.5" 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.4 0.4 0.4 n n n n n n n n n n n Power 0 to 10 Vdc High Quality Standard Basic Category n n n n n n n n n n n 1. Includes mounting accessories 2. Comes with 590-500 housing for conduit 590-500 Accessories Optional accessories help speed up installation. Percentage Accuracy Water Column Adjustable LCD Display Pressure Relay Contact 4 to 20 mA Output 0 to10 Vdc Version Differential Part Number Relative Used in building energy management systems, these transducers are capable of measuring pressures with the accuracy necessary for proper building pressurization and airflow control. Their 0 to 10 Vdc analog output is compatible with all energy management systems. 590-501 24 Vac QBM81 Air Pressure Sensors Part Number 590-500 Description Housing to Adapt to 1/2" Conduit, Use with 590 Types www.usa.siemens.com/hvac 21 Specialty Sensors Cutting-edge solutions to meet emerging needs and assist in obtaining LEED credits. Perfect for retrofit or new construction projects, these interchangeable sensors integrate with any building management system. Through precise control and monitoring, they will help ensure your building meets the demands of today and tomorrow. Rely on them to deliver savings on operating costs and count on Siemens expertise for assistance in meeting energy efficient control strategies and Green initiatives. Solar Impact Sensors can be used when solar compensation is necessary for buildings or building sections with large window areas that are subjected to strong solar radiation, especially in installations where thermostatic radiator valves cannot be used. Liquid Flow Switches are used to monitor the flow of fluids in hydraulic systems, especially in refrigeration and heat pumps, and are for use with condensers, boilers, and heat exchangers. 22 QLS60 Solar Impact Sensor NEMA 4 n n QVE1900U Liquid Flow Switches 1-1/4 to 8 3/4 to 8 n n n n n n QVM62.1 n Power Adjustable 0-3000 Measuring Range Relay Contact QVM62.1 Output 4 to 20 mA Air Velocity (FPM) 0 to 10 Vdc Part Number 0 to 16 ft/s 0 to 33 ft/s 0 to 49 ft/s www.usa.siemens.com/hvac 24 Vac Air Velocity Sensor The sensor is used to control the air velocity to a constant value, or to balance out pressure fluctuations (supply or extract air control). Using a special thin-film sensing element, the sensor operates largely independently of the direction of flow and is nearly insensitive to any kind of dirt in the air flow. Paddle Material High Grade Steel 15A Power 24 Vac/Vdc n n Contact QVE1901U 1A QVE1900U QVE1901U Pipe Diameter In. Switch SPDT Part Number Magnetic Reed Contacts Flow switches detect the flow of the medium to be monitored by means of a paddle. If the flow velocity in the piping falls below the adjusted switch-off value, the paddle in the QVE1900U model actuates a micro-switch with a dry contact (SPDT), which closes the contact. In the QVE1901U model, the switching is achieved through two opposite magnets and a reed contact. n Non-metal 0 to 1000 0 to 93 Housing 18-30 Vdc n W/ft2 n Power 24 Vac QLS60 Range W/m2 Output 40 to 20 mA Part Number 0 to 10 Vdc Used as a demand sensor in facilities where compensation of solar radiation is required or desired. To determine the impact of solar radiation, the sensor uses a solar cell that acquires the level of radiation. n 23 Siemens Industry, Inc. 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 USA Tel. 888-593-7876 Siemens Building Technologies, Ltd. 2 Kenview Boulevard Brampton, Ontario L6T 5E4 Canada Tel. 905-799-6649 The information in this document contains general descriptions of technical options available, which are not always present in individual cases. The required features should be specified in each individual case at the time at the time of purchase. © Siemens Industry, Inc. 2011 Ready to place an order? Contractors or Wholesalers, call 1-888-593-7876 Siemens Solution Partners, call 1-800-516-9964 Canadian Customers, call 1-800-236-2967 All other customers, call your local Siemens branch. www.usa.siemens.com/hvac 153-547 (10/11)