Rev.: 2 Specification AXLE208 Oscillator type: (VC)TCXO in CO15 package Parameter Frequency range min. 6 6 1 Frequency stability vs. operating temperature range vs. supply voltage variation vs. load change Long term (aging) per year Frequency adjustment range Mechanical (internal trimmer) Electronic Frequency Control (EFC) EFC voltage VC EFC slope (f / VC) EFC input impedance RF output Signal waveform Load Amplitude Supply voltage VS Current consumption (Note 2) Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. typ. max. Unit 190 190 800 ±0.5 to ±5 See tables 1 & 2 ±0.1 ±0.3 ±0.2 ±1 ±3 ±5 0.15 0.5 1.65 2.5 Positive 3.15 4.5 100 Condition MHz MHz MHz ppm ppm Clipped Sine wave Sine wave HCMOS Option 4 & 5 ppm ppm ppm VS ±5 % Load ±10 % @+40°C ppm ppm V V Option 1 = blank Option 1 = “V” Option 2 = “3” Option 2 = “5” kΩ Clipped Sine wave Sine wave HCMOS 10 kΩ || 10 pF 50 Ω 15 pF 0.8 V p‐p 1.0 V p‐p 0 dBm +3 +5 dBm According to relevant Logic Standard 3.15 3.3 3.45 V 4.75 5.0 5.25 V 2 ~ 30 mA 12 ~ 30 mA 15 ~ 50 mA 20.3x20.3x5.3 max. 8 Palette Date: 2014‐11‐27 mm g Option 3 = “C” Option 3 = “S” Option 3 = “H” Option 3 = “C” Option 3 = “S” Option 3 = “H” Option 3 = “C” / 3.3 V Option 3 = “C” / 5.0 V Option 3 = “S” / 3.3 V Option 3 = “S” / 5.0 V Option 3 = “H” Option 2 = “3” Option 2 = “5” Option 3 = “C” Option 3 = “S” Option 3 = “H” IEC 60679‐3 CO 15 IEC 60286‐3 Terminology and test conditions are according to IEC60679‐1 and MIL‐PRF‐55310, unless otherwise stated Depending on frequency and supply voltage All combinations of options might not be available. Please consult factory GmbH & Co. KG Roemerring 9 D‐74821 Mosbach Germany AXLE208 Rev.2 Drawing D2 Page 1(4) ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E‐mail: [email protected] Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature ‐0.5 ‐0.5 ‐55 VS + 10% 6 +105 Unit Condition V V °C VS to GND VC to GND Frequency stability vs. temperature Option 4 05 10 15 20 25 30 35 50 Table 1 Stability [ppm] ±0.5 ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 ±5.0 Lower Temperature Option 5 T [°C] 0 0 1 ‐10 2 ‐20 3 ‐30 4 ‐40 Table 2 Upper Temperature Option 5 T [°C] A +50 B +60 C +70 D +75 E +80 F +85 Ordering Code Option 2 Option 3 Option 4 [Supply [RF [Stability] Voltage] output] AXLE208 _ or “V” 3 or 5 C, S, H Table 1 Example: AXLE208‐V‐5‐S‐10‐3D_Rev.2 – 10.000 MHz Model Option 1 [EFC]* Option 5 [Temperature Revision Frequency [MHz] range] Table 2 Rev.2 10.000 Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D‐74821 Mosbach Germany Application Note AXAN‐011 Application Note AXAN‐012 Procedure IEC60749‐26 HBM IEC60749‐27 MM Yes No Yes No AXLE208 Rev.2 Drawing D2 Page 2(4) Source www.axtal.com www.axtal.com Condition 2000 V 200 V ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E‐mail: [email protected] Enclosure drawing Pin connections Pin # 1 2 3 4 5 Symbol N.C. or VC RF OUT VS GND GND Function No Connection or Control Voltage (EFC) RF Output Supply Voltage Ground Ground Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2‐17 IEC 60679‐1 Clause 5.6.2 MIL‐STD‐ 202G Method 112E MIL‐STD‐ 810F Method MIL‐PRF‐ 55310D Clause 3.6.1.2 2‐20 2‐58 5.6.3 208H 210F 3.6.52 3.6.48 2‐27 5.6.8 213B 516.4 3.6.40 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half‐sine pulse Test Fc, 30 min per axes, 10 Hz ‐ 55 Hz 0,75mm; 55 Hz ‐ 2 kHz, 10g Test Fdb Vibration, 2‐6 5.6.7.1 201A 516.4‐4 3.6.38.1 sinusoidal* 204D 3.6.38.2 Vibration, 2‐64 5.6.7.3 214A 514.5 3.6.38.3 random* 3.6.38.4 Endurance tests 108A ‐ ageing 5.7.1 4.8.35 30 days @ 85°C, OCXO @25°C ‐ extended aging 5.7.2 1000h, 2000h, 8000h @85°C Other environmental conditions on request Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. GmbH & Co. KG Roemerring 9 D‐74821 Mosbach Germany AXLE208 Rev.2 Drawing D2 Page 3(4) ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E‐mail: [email protected] Revision History Rev. Drawing Date [dd.mm.yyyy] 2 2 2 D0 D1 D2 22.09.2009 06.04.2014 27.11.2014 Remarks Editorial changes Environmental conditions updated, editorial changes Sine wave output level changed to +3 dBm typ. Author Checked BN HH BN BN HH BN GmbH & Co. KG Roemerring 9 D‐74821 Mosbach Germany AXLE208 Rev.2 Drawing D2 Page 4(4) ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E‐mail: [email protected]