Designed and Manufactured in Germany Specification Oscillator type: Rev.: 2 Date: 2015-06-23 AXIOM130HP High-performance OCXO with very high frequency stability equivalent to Oscilloquartz Models OCXO 8662/8663 Parameter Frequency range Standard frequencies Frequency stability Initial tolerance @ +25°C vs. operating temperature range vs. supply voltage variation (pushing) vs. load change (pulling) Long term (aging) per day (Note 2) Long term (aging) per month (Note 2) Long term (aging) per year (Note 2) Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC nonlinearity EFC input impedance RF output (Note 3) Signal waveform Load RL Output level Harmonics Spurious Warm-up time @ +25°C Phase noise @ 10.000 MHz Short term stability (Allan deviation) Reference voltage VREF output (Note 4) Supply voltage VS (Note 5) min. typ. 5 40 5.000 / 8.192 / 10.000 / 16.384 Notes: 1. 2. 3. 4. 5. Unit ±0.3 0 VREF/2 Positive ±100 ppb VC @ VREF/2 steady state ±0.3 ±0.05 ±0.2 ±5 ±30 ppb ppb ppb ppb ppb VS ±5 % RL ±10 % after 30 days operation after 30 days operation after 30 days operation VREF ppm V ±5 100 Sine wave 50 +4 -95 -125 -145 -155 -160 11.4 22.8 10.0 12.0 24.0 Condition MHz MHz Option 2 & 3 See tables 1 & 2 Current consumption (steady state) @ +25°C Current consumption (warm-up) Enclosure (see drawing) (LxWxH) Weight Packing max. -30 -70 3 -80 -110 -135 -145 -145 -11 2·10 12.6 25.2 200 100 500 300 52.0x42.0x25.0 max. 100 Palette % kΩ Ω dBm dBc dBc min dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz V V V mA mA mA mA ±10% fnom ±1 MHz ∆ffinal/f0 < ±0.1 ppm @ 1 Hz @ 10 Hz @ 100 Hz @ 1 kHz @ ≥10 kHz τ = 0.2~10 s Option 1 = “12” Option 1 = “24” Option 1 = “12” Option 1 = “24” Option 1 = “12” Option 1 = “24” mm g Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Lower aging on request HCMOS output on request Other reference voltage on request Other supply voltages on request GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM130HP Rev.2 Drawing D0 Page 1(4) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -0.5 -40 VS + 10% 15 +125 Unit Condition V V °C VS to GND VC to GND Frequency stability vs. temperature Stability [ppb] ±0.1 ±0.3 ±0.5 ±2 Option 2 001 003 005 02 Table 1 Lower Temperature Option 3 T [°C] 0 0 1 -10 2 -20 Table 2 Upper Temperature Option 3 T [°C] A +50 B +60 C +70 Standard: “1B” = -10°C to +60°C Ordering Code Option 1 Option 2 Option 3 [Supply Voltage] [Stability] [Temperature range] AXIOM130HP 12 or 24 Table 1 Table 2 Example: AXIOM130HP-12-02-2C_Rev.2 – 10.000 MHz Model Handling and Testing Parameter Handling and Testing Processing Parameter Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS- Compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Revision Frequency [MHz] Rev.2 10.000 Procedure Application Note AXAN-011 Application Note AXAN-012 Procedure IEC60749-26 IEC60749-27 Yes Yes AXIOM130HP Rev.2 Drawing D0 Page 2(4) HBM MM No No Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections: Pin # 1 2 3 4 5 Symbol GND VC VREF VS RF OUT Function Ground Control Voltage (EFC) Reference voltage Supply Voltage RF Output * See Application Note AXAN-011 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM130HP Rev.2 Drawing D0 Page 3(4) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Vibration, sinusoidal* Vibration, random* Endurance tests - ageing - extended aging IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B 516.4 3.6.40 2-6 5.6.7.1 516.4-4 2-64 5.6.7.3 201A 204D 214A 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 3.6.52 3.6.48 514.5 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 108A 5.7.1 5.7.2 4.8.35 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Drawing Date [dd.mm.yyyy] 1 2 D0 D0 15.01.2015 23.06.2015 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue Standard frequency 16.384 MHz corrected, temp. stability option 2 updated, editorial changes AXIOM130HP Rev.2 Drawing D0 Page 4(4) Author Checked HH HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]