SM320 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS SM360 TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE - 20 to 60 Volts CURRENT - 3.0 Amperes FEATURES * High current capability * Ideal for surface mounted applications * Low leakage current for high efficiency SM-1(DO-213AB) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated solderable per MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.12 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL SM320 SM330 SM340 SM350 SM360 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 Volts VDC 20 30 40 50 60 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A=90 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C IO 3.0 Amps I FSM 80 Amps VF .475 IR .500 .525 1.0 R θJA 40 CJ 200 Storage Operating Temperature Range T J , T STG -65 to + 125 NOTES : 1. Thermal Resistance (Junction to Ambient), .24in2 (6.0mm2) copper pads to each terminal. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. mAmps 25 Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note1) .70 0 C/ W pF 0 C RATING AND CHARACTERISTIC CURVES ( SM320 THRU SM360 ) SM320 SM360 SM340 10 DC COMPONENTS CO., LTD. R