M13 THRU M20 DC COMPONENTS CO., LTD. R RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 1300 to 2000 Volts CURRENT 1.0 Ampere FEATURES * ldeal for surface mounted applications * Low leakage current SMA(DO-214AC) .062(1.60) .055(1.40) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.064 gram .114(2.90) .098(2.50) .181(4.60) .157(4.00) .012(0.305) .006(0.152) .096(2.44) .078(2.00) .060(1.52) .030(0.76) .008(0.203) .002(0.051) .208(5.28) .188(4.80) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS VDC Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75o C Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 3) Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range @T A = 25 o C @T A = 125 o C M13 1300 M16 1600 M20 2000 910 1120 1400 Volts 1300 1600 2000 Volts UNITS Volts IO 1.0 Amps I FSM 30 Amps VF 1.1 5.0 50 2.5 uAmps IR trr RθJL CJ T J , T STG NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal Resistance (Junction to Ambient), .24in2 (6.0mm 2 ) copper pads to each terminal. 3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A. 30 15 -65 to + 175 Volts uSec 0 C/ W pF 0 C RATING AND CHARACTERISTIC CURVES (M13 thru M20) DC COMPONENTS CO., LTD. R