GL34A DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS GL34M TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE - 50 to 1200 Volts CURRENT - 0.5 Ampere FEATURES * Ideal for surface mounted applications * Low leakage current * Glass passivated junction SM-2(DO-213AA) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated solderable per MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.036 gram .150(3.81) .130(3.33) .022(.56) .016(.41) .068(1.77) .060(1.52) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL GL34A GL34J GL34K Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current T A = 75oC Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) @T A = 25 o C o GL34D GL34G Volts IO 0.5 Amps 30 Amps IR @T A = 125 C 1.1 5.0 Maximum Thermal Resistance (Note 2) RθJL 50 30 Typical Junction Capacitance (Note 1) CJ 8.0 T J , T STG -65 to + 175 Operating and Storage Temperature Range GL34M UNITS I FSM VF Maximum Forward Voltage at 0.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage GL34B NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal resistance (Junction to Ambient),.24in2 (6.0mm2 ) coppeer pads to each terminal. Volts uAmps 0 C/ W pF 0 C RATING AND CHARACTERISTIC CURVES ( GL34A THRU GL34M ) 0.5 .4 .3 .2 .1 20 10 8 DC COMPONENTS CO., LTD. R