RS1A DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS RS1M TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * ldeal for surface mounted applications * Low leakage current * Opened junction SMA ( DO-214AC ) .062(1.60) .055(1.40) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.064 gram .114(2.90) .098(2.50) .181(4.60) .157(4.00) .096(2.44) .078(2.00) .060(1.52) .030(.76) .008(0.203) .002(0.051) .208(5.28) .188(4.80) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL Maximum Recurrent Peak Reverse Voltage VRRM RS1A 50 Maximum RMS Voltage VRMS 35 70 VDC 50 100 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 3) Maximum Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range @T A = 25 o C @T A = 125 oC RS1B 100 IO RS1D 200 RS1M UNITS 1000 Volts RS1G 400 RS1J 600 RS1K 800 140 280 420 560 700 Volts 200 400 600 800 1000 Volts 1.0 Amps I FSM 30 Amps VF 1.3 5.0 IR trr 150 150 250 RθJL 30 CJ 15 -65 to + 175 T J , T STG NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal Resistance (Junction to Ambient), .24in2 (6.0mm 2 ) copper pads to each terminal. 3. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A Volts uAmps 500 nSec 0 C/ W pF 0 C RATING AND CHARACTERISTIC CURVES ( RS1A THRU RS1M ) DC COMPONENTS CO., LTD. R