HC49/US (AT49) LOW PROFILE SMD MICROPROCESSOR CRYSTAL ABLS3 Pb RoHS Compliant Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: • Suitable for RoHS compliant reflow • Low height reduced to 2.5/2.6mm • Tight stability & extended temperature options Reduced height 2.5/2.6mm toto2.5mm 11.4 x 4.7 x 2.5/2.6mm | | | | | | | | | | | | | | | APPLICATIONS: • Computers, Modems, Microprocessors • Wireless Applications STANDARD SPECIFICATIONS: Parameters Frequency Range Minimum Typical Maximum 3.579545 ----- 24.000000 24.000001 ----- 50.000000 24.000001 ----- 70.000000 Units Notes MHz Fundamental AT (Standard) Fundamental AT or BT (See options) 3rd Overtone (Standard) Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Fundamental or 3rd Overtone 0 ----+70 -55 ----+125 -50 ----+50 ºC ºC ppm Frequency Stability over the Operating Temperature ( ref. to +25°C) -50 ----- +50 ppm Equivalent series resistance (R1) Shunt capacitance (C0) ----- See table 1 below ----- 7 Ω pF Load capacitance (CL) ----- 18 ----- pF Drive Level ----- 100 1000 µW -5 ----- +5 ppm Aging Insulation Resistance Drive level dependency (DLD) TABLE 1: ESR FREQUENCY (MHz) 3.579545 - 4.999 (Fund.) 5.000 - 5.999 (Fund.) 6.000 - 7.999 (Fund.) 8.000 - 8.999 (Fund.) 9.000 - 9.999 (Fund.) 10.000 - 15.999 (Fund.) 16.000 - 50.000 (Fund.) 24.01 - 31.999 (3rd O/T) 32.000 - 70.00 (3rd O/T) ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CE RTIFIED See options See options See options (For BT cut, ±100ppm max.at -10° C to +60° C only) Standard (See options if other than STD) @25°C±3°C First year @ 100Vdc ± 15V 500 --------MΩ Minimum 7 points tested: from 1µW to 500µW. Change in frequency (Maximum - Minimum) over DLD range < ±10ppm Change in ESR (Maximum - Minimum) over DLD range < 25% of Max ESR value. Maximum ESR over DLD range < Max ESR value. ESR (Ω) 180 120 100 80 60 50 40 100 80 Revised: 07.05.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | w ww.abracon.com HC49/US (AT49) LOW PROFILE SMD MICROPROCESSOR CRYSTAL ABLS3 Pb RoHS Compliant Reduced height 2.5/2.6mm toto2.5mm 11.4 x 4.7 x 2.5/2.6mm | | | | | | | | | | | | | | | OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABLS3 - MHz - - - - Packaging Blank: Bulk T: Tape & Reel Frequency in MHz Please specify the frequency in MHz. e.g. 14.31818MHz Oscillation Mode F: Fund. AT>24MHz FB: Fund. BT>24MHz Load Capacitance (pF) Please specify CL (Minimum 10pF) in pF or S for series Custom ESR if other than standard R : Specify a value in Ω (e.g.: R40) Operating Temp. A: -10°C ~ +60°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C J*: -40°C ~ +105°C K*: -40°C ~ +125°C L*: -55°C ~ +125°C Freq. Tolerance H5: ± 5 ppm 1: ± 10 ppm 7: ± 15 ppm 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm Freq. Stability U**: ± 10 ppm G: ± 15 ppm X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm R: ± 150 ppm NOTE: Fundamental BT frequency stability ± 100ppm max. at -10° C to +60° C only. * Frequency stability ±50ppm, ±100ppm, ±150ppm only. ** -10 to +60C only. Contact ABRACON for tighter frequency stability. ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CE RTIFIED Revised: 07.05.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | w ww.abracon.com HC49/US (AT49) LOW PROFILE SMD MICROPROCESSOR CRYSTAL ABLS3 OUTLINE DRAWING: Pb RoHS Compliant Reduced height 2.5/2.6mm toto2.5mm 11.4 x 4.7 x 2.5/2.6mm | | | | | | | | | | | | | | | TAPE & REEL: T = tape and reel (1000pcs/reel) H: 2.5mm max for frequency 6MHz or higher 2.6mm max for frequency lower than 6MHz Dimensions: inches (mm) REFLOW PROFILE: ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CE RTIFIED Revised: 07.05.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | w ww.abracon.com