MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL ABSM RoHS/RoHS II Compliant 13.0 x 4.7 x 4.2 mm Pb in high melting type solder exemption 7(a) per RoHS II 2011/65/EU Annex FEATURES: • Plastic molded SMD • Suitable for RoHS compliant reflow APPLICATIONS: • Computers, Modems, Microprocessors • Communication, Test equipment • PCMCIA STANDARD SPECIFICATIONS: Parameters Frequency Range Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Minimum Maximum 3.579 50.000 Fundamental, AT-cut -10 +60 -40 +85 -50 +50 -100 +100 180 150 120 100 80 60 50 40 7.0 Equivalent series resistance (R1) Shunt capacitance (C0) Load capacitance (CL) ºC ºC ppm See options ppm See options Ω 3.579 ~ 3.999MHz 4.000 ~ 4.999MHz 5.000 ~ 5.999MHz 6.000 ~ 6.999MHz 7.000 ~ 8.999MHz 9.000 ~ 12.999MHz 13.000 ~ 19.999MHz 20.000 ~ 50.000MHz pF Drive Level -5 Insulation Resistance Notes pF 18.0 Aging Units MHz 100 µW +5 ppm 500 See options Standard (See options if MΩ other than STD) @25°C±3°C First year @ 100Vdc ± 15V OPTIONS & PART IDENTIFICATION: ABSM - MHz - - - - Frequency in MHz* Please specify the frequency in MHz. e.g. 16.000MHz Packaging Blank: Bulk T: 1000pcs/reel Load Capacitance (pF) Please specify CL (min 10pF) in pF or S for series Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Freq. Stability Blank: ± 100 ppm Z*: ± 50 ppm Operating Temp. E: 0°C to +70°C B: -20°C to +70°C C: -30°C to +70°C N: -30°C to +85°C D: -40°C to +85°C Freq. Tolerance 3: ± 25 ppm 4: ± 30 ppm * Note: For frequency range: 9.0 ~ 50.0MHz, Freq. Stability option “Z” is available with all Operating Temp. options; For frequency range: 3.579 ~ 8.999MHz, Freq. Stability option “Z” is available only with Operating Temp. option “E” and “B”. ABRACON IS ISO9001:2008 CERTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.22.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL ABSM RoHS/RoHS II Compliant 13.0 x 4.7 x 4.2 mm OPTIONS & PART IDENTIFICATION: Recommended Land Pattern Dimensions: mm OPTIONS & PART IDENTIFICATION: ABRACON IS ISO9001:2008 CERTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.22.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL ABSM RoHS/RoHS II Compliant 13.0 x 4.7 x 4.2 mm TAPE & REEL: Packaging: T=Tape and reel (1000pcs/reel) Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.22.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com