High Performance, Programmable LVDS SMD MEMS Oscillator ASTMUPLD Pb ESD Sensitive Moisture Sensitivity Level (MSL) – 1 FEATURES: RoHS/RoHS II compliant ASTMUPL D 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm APPLICATIONS: • 10GB Ethernet, SONET, SATA, SAS, Fiber Channel, PCI Express • Storage • Servers • Networking • Telecom • Instrumentation • Harsh environment (vibration, shock-prone and humid) • Industry Standard package sizes: 3.2 x 2.5 x 0.75mm, 5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm • Any frequency between 1MHz and 625MHz • Supply Voltage options: 3.3V, 2.8V, 1.8V, 2.25V~3.63V • Ultra-low RMS phase jitter: 0.6ps typ. (@156.25MHz, integration bandwidth: 12kHz to 20MHz) • Frequency Stability options: ±10ppm, ±20ppm, ±25ppm, ±50ppm over -20 to +70°C and -40 to +85°C • High Performance MEMS Technology by SiTime STANDARD SPECIFICATIONS: Parameters Min Output Frequency Range (F) Frequency Stability (Fstab) Operating Temperature Range (Tuse) Aging@25°C st 1 year 10 years Supply Voltage (Vdd) Input High Voltage(VIH) Input Low Voltage(VIL) Input Pull-up Impedance ( Zin) Typ Max Unit 1 625 MHz See Note 1 for Frequencies not supported -10 -20 -25 -50 -20 -40 -2 -5 +10 +20 +25 +50 +70 +85 +2 +5 ppm Inclusive of initial tolerance at 25°C, and variations over operating temperature, rated power supply voltage and load 1.71 1.8 1.89 2.25 2.97 2.25 70%*Vdd 2.5 3.3 - 2.75 3.63 3.63 100 °C Notes Option “E” Option “L” ppm Option “18” (for 1MHz~220MHz only) V Option “25” Option “33” Option “Blank” (default) 30%*Vdd V V 250 kΩ Pin 1, OE logic high or logic low, ST logic high MΩ Pin 1, ST logic low 2 Pin 1 Pin 1 Startup Time (Tstart) 6 10 ms Measured from the time Vdd reaches its rated minimum value Resume Time ( Tresume) 6 10 ms In standby mode. Measured from the time ST pin crosses 50% threshold 55 % 55 mA Excluding load termination current, Vdd=2.5V or 3.3V 35 mA OE=Low 1 µA OE=Low 100 µA ST =Low, for all Vdd Duty Cycle Output Type 45 Current Consumption ( Idd ) OE Disable Current (IOD) Output Disable Leakage Current ( Ileak) Standby Current (Istd) Note: 1. Frequencies not supported: Range 1: From 209.000001MHz to 210.999999MHz Range 2: From 251.000001MHz to 263.999999MHz Range 3: From 314.000001MHz to 422.999999MHz Range 4: From 502.000001MHz to 527.999999MHz ABRACON IS ISO9001:2008 CE RTIFIED LVDS 47 LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale High Performance, Programmable LVDS SMD MEMS Oscillator ASTMUPLD Pb ASTMUPL D 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm RoHS/RoHS II compliant (Continued) Parameters Differential Output Voltage (VOD) Min Typ Max Unit 250 350 450 mV 50 mV 1.2 1.375 V mV 495 495 50 700 600 115 ns VOD Magnitude Change ( ∆VOD) Offset Voltage ( VOS) 1.125 VOS Magnitude Change ( ∆VOS) Rise/Fall Time ( Tr /Tf) OE Enable/Disable Time (Toe) RMS Period Jitter ( Tjitt) RMS Phase Jitter (random) ( Tphj) 1.2 1.7 1.4 1.7 0.6 0.85 ps ps ps Notes 20%-80%, Freq. = 1MHz~220MHz 20%-80%, Freq. = 220MHz~625MHz F=212.5MHz, 220MHz. For other frequencies, Toe=100ns+3*cycles F=100MHz, 156.25MHz, 212.5MHz, 622.08MHz, Vdd=2.5V or 3.3V F=266MHz, 312.5MHz, Vdd=2.5V or 3.3V F=156.25MHz, 312.5MHz, integration bandwidth=12kHz to 20MHz Standard Frequencies Standard Frequency (MHz) 25.000000 50.000000 74.175824 74.250000 75.000000 98.304000 125.000000 133.000000 133.300000 133.330000 133.333000 133.333300 148.351648 148.500000 150.000000 155.520000 156.250000 161.132800 166.660000 166.666000 166.666600 166.666660 166.666666 200.000000 100.000000 133.333330 166.000000 212.500000 106.250000 133.333333 166.600000 Absolute Maximum Ratings Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings. Parameters Storage Te mperature VDD Electrostatic Discharge (HBM) Soldering Temperature (follow standard Pb free soldering guidelines) Min. -65 -0 . 5 Max. 150 4 2000 Unit °C V V 260 °C Thermal Consideration Package 7.0 x 5.0mm, 6-pin 5.0 x 3.2mm, 6-pin 3.2 x 2.5mm, 6-pin ABRACON IS ISO9001:2008 CE RTIFIED θJA, 4 Layer Board (°C/W) 142 97 109 LLC θJC, Bottom (°C/W) 27 20 20 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale High Performance, Programmable LVDS SMD MEMS Oscillator ASTMUPLD Pb ASTMUPL D RoHS/RoHS II compliant 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm PART IDENTIFICATION: ASTMUPLD - Package Size E: 3.2x2.5mm FL: 5.0x3.2mm V: 7.0x5.0mm Output Frequency in MHz e.g. 7.3728, 625.000 Supply Voltage Blank: 2.25V~3.63V 18: 1.8V±10%* 25: 2.5V±10% 33: 3.3V±10% * For Freq. range 1MHz~220MHz only - MHz- - - Pin 1 Function E: Output Enable S: Standby Operating Temp. E: -20°C ~ +70°C L: -40°C ~ +85°C Freq. Stability Y: ±10ppm J: ±20ppm R: ±25 ppm C: ±50 ppm Packaging Blank: Bulk T: Tape & Reel (1kpcs / reel) T3: Tape & Reel (3kpcs / reel) RECOMMENDED TERMINATION DIAGRAM TYPICAL PHASE NOISE 100MHZ, 3.3V, LVDS Output ABRACON IS ISO9001:2008 CE RTIFIED 622.08MHZ, 3.3V, LVDS Output LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale High Performance, Programmable LVDS SMD MEMS Oscillator ASTMUPLD Pb RoHS/RoHS II compliant ASTMUPL D 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm OUTLINE DIMENSION: 3.2 x 2.5mm Package (Option “E”) Recommended Land Pattern Recommended Land Pattern 5.0 x 3.2mm Package (Option “FL”) Recommended Land Pattern 7.0 x 5.0mm Package (Option “V”) Pin Name Output Enable 1 OE/ST 2 NC No Connect 3 4 5 6 GND Out+ OutVdd Power Output Output Power Standby Dimensions: mm Functionality H or Open: specified frequency output L: output is high impedance. Only output driver is disabled H or Open: specified frequency output L: output is low (weak pull down). Device goes to sleep mode. Supply current reduces to Istd. Leave it floating or connect to GND for better heat dissipation Vdd power supply ground(1) Oscillator output Complementary oscillator output Power supply voltage(1) Notes: 1. A capacitor value of 0.1µF between Vdd and GND is recommended. ABRACON IS ISO9001:2008 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale High Performance, Programmable LVDS SMD MEMS Oscillator ASTMUPLD Pb RoHS/RoHS II compliant ASTMUPL D 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm TYPICAL PERFORMANCE DATA REFLOW PROFILE: Item Conditions 3°C/second max TS MAX to TL (Ramp-up Rate) Preheat ABRACON IS ISO9001:2008 CE RTIFIED Temperature Minimum (TS MIN) 150°C Temperature Typical (TS TYP) 175°C Temperature Maximum (TS MAX) 200°C Time (tS) 60 – 180 seconds Ramp-up Rate (TL to TP) 3°C/second max Time Maintained Above Temperature (TL) 217°C Time (tL) 60 – 150 seconds Peak Temperature (TP) 260°C max Target Peak Temperature (TP Target) 255°C Time within 5°C of actual peak (tP) 20 – 40 seconds Max. Number of Reflow Cycles 3 Ramp-down Rate 6°C/second max Time 25°C to Peak Temperature (t) 8 minutes max LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale High Performance, Programmable LVDS SMD MEMS Oscillator ASTMUPLD Pb ASTMUPL D 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm RoHS/RoHS II compliant TAPE & REEL: Device Size 3225 5032 7050 Device Size 3225 5032 7050 Tape Size 12mm 16mm Unit: mm P1 P2 D0 1.5+0.1/0.0 1.5+0.1/0.0 1.5+0.1/0.0 D1 min. E1 E2 min. F P0 1.5 1.75±0.1 10.25 5.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05 1.5 1.75±0.1 10.25 5.5±0.05 4.0±0.1 8.0±0.1 2.0±0.05 1.5 1.75±0.1 14.25 7.5±0.1 4.0±0.1 8.0±0.1 2.0±0.1 T 0.6 0.6 0.6 T1 max. 0.1 0.1 0.1 T2 max. 1.65 1.65 1.80 W max. 12.3 12.3 16.3 A0 2.8±0.10 3.5±0.10 5.4±0.10 B0 3.5±0.10 5.3±0.10 7.4±0.10 Unit: mm K0 1.10±0.10 1.10±0.10 1.3±0.10 D min. 20.2 20.2 20.2 20.2 N 60±0.5 100±0.5 60±0.5 100±0.5 A max. 180 330 180 330 Device Size 3225 5032 7050 B min. 1.5 1.5 1.5 1.5 C 13.0±0.2 13.0±0.2 13.0±0.2 13.0±0.2 “T” (1k/reel) 12mm Tape 7” Reel 12mm Tape 7” Reel 16mm Tape 7” Reel Unit: mm W1 W2 max. 12.4+2.0/-0 18.4 12.4+2.0/-0 18.4 16.4+2.0/-0 22.4 16.4+2.0/-0 22.4 “T3” (3k/reel) 12mm Tape 7” Reel 12mm Tape 13” Reel 16mm Tape 13” Reel ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale