Ultra-Low Phase Jitter LVDS SMD Clock Oscillator ASVMX-200.000MHz-5ABB Pb ESD Sensitive RoHS/RoHS II compliant Moisture Sensitivity Level – MSL 3 APPLICATIONS: • Communications • Backplane reference clock • SERDES reference clock • FPGA FEATURES: • 200MHz LVDS • Typical phase noise: 100fs (Integration range: 1.875MHz-20MHz) • ±50ppm total frequency stability over -40°C to +85°C temperature range • Industry standard 6-Pin 7mm x 5mm LGA package 7.0 x 5.0 x 1.4mm High Performance KEY ELECTRICAL SPECIFICATIONS Item Supply Voltage Storage Temp. Lead Temp.(soldering, 10s) ESD (HBM) Minimum -0.3 -55 Maximum +3.6 +125 +260 2 Unit V °C °C kV Condition VDD = 2.375 - 3.63V, TA = -40°C to +85°C, outputs terminated with 100 Ohms between Q and /Q.(1) Parameters Frequency Operating Temperature (TA) Overall Frequency Stability (2) Supply Voltage (VDD) Supply Current (IDD) Output Logic Level Minimum 1. 2. Maximum -40 -50 +2.375 VOH VOL Output Differential Voltage (VOD) Common Mode Output voltage (VCM) Start-up Time Rise Time (Tr) Fall Time (Tf) Duty Cycle Integration Range: 12kHz to 20MHz Phase Noise Integration Range: 1.875MHz to 20MHz Notes: Typical 200.000 1.248 0.898 247 1.125 +85 +50 +3.63 90 1.602 1.252 454 1.375 20 400 400 55 1.375 1.025 350 1.2 100 100 45 220 Units MHz °C ppm V mA V V mV V ms ps % Notes VOH max= VCM max+1/2 VOD max VOL min= VCM min-1/2 VOD max RL=100Ω , CL=0pF 20% to 80% fsRMS 100 Guaranteed after thermal equilibrium Inclusive of initial accuracy, temperature drift, aging, shock, vibration from -40°C to +85°C. PART IDENTIFICATION ASVMX-200.000MHz -5ABB Packing Blank: Bulk or Tube T: Tape & Reel (1k/reel) ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.22.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVDS SMD Clock Oscillator ASVMX-200.000MHz-5ABB DESCRIPTION: OUTLINE DIMENSION Ref. A A1 A2 D D1 E E1 b c e f k m n Min. 1.260 0.190 1.070 4.900 6.900 1.050 1.350 0.050 0.210 1.090 Nom. 1.330 0.230 1.100 5.000 3.700 BSC 7.000 5.080 BSC 1.100 1.400 2.540 BSC 0.100 0.260 1.140 36 Pb Max. 1.400 0.270 1.130 5.100 RoHS/RoHS II compliant ASVMP 7.0 x 5.0 x 1.4mm Low Jitter High Performance Recommended Land Pattern Dimensional Tolerance aaa 0.100 bbb 0.070 7.100 1.150 1.450 0.150 0.310 1.190 Dimensions: mm ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.22.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVDS SMD Clock Oscillator ASVMX-200.000MHz-5ABB PIN CONFIGURATION Pb RoHS/RoHS II compliant DESCRIPTION: Pin # Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 3 4 5 6 DNC GND Q /Q VDD PWR O O PWR LVDS LVDS ASVMP 7.0 x 5.0 x 1.4mm Low Jitter High Performance Pin Function Output Enable, disables output to tri-state. 0 = Disabled, 1= Enabled, 50k Ω Pull-up Make no connection, leave floating Power Supply Ground Clock Output Complimentary Clock Output Power Supply REFLOW PROFILE Parameters Average Ramp-up Rate Pre-Heat Temp 150 – 200°C Temp > 217°C Time @ Peak Temperature Peak Temperature Ramp-down Rate Time 25°C to Peak Temp. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC Specifications 3°C /second max. 60 – 180 second 60 – 150 second 20 – 40 second 260°C + 0°C / -5°C -6°C / second max. 8 minutes max. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.22.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVDS SMD Clock Oscillator ASVMX-200.000MHz-5ABB TAPE & REEL Pb ASVMP RoHS/RoHS II compliant DESCRIPTION: 7.0 x 5.0 x 1.4mm Low Jitter High Performance T= Tape & Reel, 1000pcs/reel. Reel Size = 7-inch Reel MSL-3 packaging applies to –T option. Blank = Bulk or Tube (43pcs/tube) MSL-3 packaging applies to MOQ=43 units (tube) 313.75 ~ 316.25 0.50±0.10 All sides 5.50±0.20 6.50 Ref. 1.80+0.20/-0.10 2.80 Ref. Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.22.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale