Low power, Programmable SMD MEMS Oscillator

Low power, Programmable SMD MEMS Oscillator
ASTMLP
Moisture Sensitivity Level (MSL) – 1
Pb
ESD Sensitive
FEATURES:
RoHS/RoHS II compliant
ASTMLP
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
APPLICATIONS:
• GPON, EPON
• Portable devices
• Consumer electronics
• Network switches, router, servers
• Ethernet, USB, SATA, SAS, Firewire
• Harsh environment (vibration, shock-prone and humid)
• Industry Standard package sizes: 2.0 x 1.6 x 0.75mm, 2.5 x 2.0 x 0.75mm,
3.2 x 2.5 x 0.75mm, 5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm
• Any frequency between 1MHz and 137MHz
• Supply Voltage options: 3.3V, 3.0V, 2.8V, 2.5V, 1.8V, 2.25V ~ 3.63V
• Low Current Consumption: 3.5mA typ. (@20MHz, 1.8V, no load);
4.9mA typ. (@125MHz, 1.8V, no load)
• Frequency Stability options: ±20ppm, ±25ppm, ±50ppm over -20 to +70°C
and -40 to +85°C
• Factory programmable drive strength for improved jitter, reduced EMI or
higher capacitive output load
• High Performance MEMS Technology by SiTime
STANDARD SPECIFICATIONS:
All Min and Max limits are specified over temperature and rated operating voltage with 15pF output load unless otherwise stated.
Typical values are at 25°C and nominal supply voltage.
Parameters
Min
Typ
Max
Unit
Notes
1
110
Output Frequency Range (F)
MHz
115
137
See Section 1.1 for Standard Frequencies MHz
Standard Frequencies
Inclusive of initial tolerance at 25°C, 1st
-20
+20
year aging at 25°C, and variations over
Frequency Stability (Fstab)
-25
+25
ppm
operating temperature, rated power
-50
+50
supply voltage and load (15pF±10%)
Option “E”
-20
+70
°C
Operating Temperature Range (Tuse)
Option “L”
-40
+85
Option “18”
1.62
1.8
1.98
Option “25”
2.25
2.5
2.75
Option “28”
2.52
2.8
3.08
Supply Voltage (Vdd)
V
Option “30”
2.7
3.0
3.3
Option “33”
2.97
3.3
3.63
Option “Blank” (default)
2.25
3.63
Current Consumption ( Idd )
3.8
4.5
3.7
3.5
4.2
4.1
6.2
7.5
5.5
4.9
6.4
5.6
4.2
OE Disable Current (IOD)
Standby Current (Istd)
Startup Time (Tstart)
Enable/Disable Time (Toe)
Resume Time ( Tresume)
ABRACON IS
ISO9001:2008
CE RTIFIED
4.0
2.6
4.3
1.4
2.5
0.6
1.3
5
No load, F=20MHz, Vdd=2.8V,3.0V,3.3V
or 2.25V-3.63V
No load, F=20MHz, Vdd=2.5V
mA
No load, F=125MHz, Vdd=1.8V
mA
µA
ms
130
122
5
ns
ms
LLC
No load, F=20MHz, Vdd=1.8V
No load, F=125MHz,
Vdd=2.8V,3.0V,3.3V or 2.25V-3.63V
No load, F=125MHz, Vdd=2.5V
Vdd=2.5V-3.3V, OE=GND, output is in
High-Z state
Vdd=1.8V, OE=GND, output is in High-Z
state
ST=GND, Vdd=2.8V-3.3V, output is
weakly pulled down
ST=GND, Vdd=2.5V, output is weakly
pulled down
ST=GND, Vdd=1.8V, output is weakly
pulled down
Measured from the time Vdd reaches its
rated minimum value
F=110MHz. For other frequencies,
Toe=100ns+3*cycles
F=137MHz. For other frequencies,
Toe=100ns+3*cycles
Measured from the time ST pin crosses
50% threshold
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
ASTMLP
RoHS/RoHS II compliant
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
(Continued)
Parameters
Min
Output Type
Duty Cycle
Typ
Max
Unit
55
2
2.5
2
%
Notes
LVCMOS
45
1
1.3
Rise/Fall Time ( Tr /Tf)
All Vdd options
Vdd=2.5V, 2.8V, 3.0V or 3.3V, 20%-80%
ns
Vdd=1.8V, 20%-80%
Vdd=2.25V-3.63V, 20%-80%
IOH=-4mA (Vdd=3.0V or 3.3V)
Output High Voltage (VOH)
90%*Vdd
V
IOH=-3mA (Vdd=2.8V or 2.5V)
IOH=-2mA (Vdd=1.8V)
IOL=4mA (Vdd=3.0V or 3.3V)
Output Low Voltage (VOL)
10%*Vdd
V
IOL=3mA (Vdd=2.8V or 2.5V)
IOL=2mA (Vdd=1.8V)
Input High Voltage(VIH)
Input Low Voltage(VIL)
70%*Vdd
50
Input Pull-up Impedance ( Zin)
Peak-to-peak Period Jitter (Tpk)
RMS Phase Jitter (random) ( Tphj)
Standard Frequency (MHz)
ABRACON IS
ISO9001:2008
CE RTIFIED
4
19.2
30
37.5
62.5
74.175824
150
kΩ
2
RMS Period Jitter ( Tjitt)
3.57
18.432
28.6363
33.3333
60
72
87
30%*Vdd
V
V
4.096
20
31.25
38
65
74.176
MΩ
1.8
3
1.8
3
1.9
3
1.8
4
12
25
14
30
0.5
0.9
1.3
2
Standard Frequency (MHz)
6
7.3728
8.192
24
24.576
25
32.768
33
33.3
38.4
40
40.5
66
66.66
66.66
74.25
75
77.76
LLC
Pin 1
Pin 1
Pin 1, OE logic high or logic low,
ST logic high
Pin 1, ST logic low
F=75MHz, Vdd=2.5V, 2.8V, 3.0V or
3.3V
ps
F=75MHz, Vdd=1.8V
F=125MHz, Vdd=2.5V, 2.8V, 3.0V or
3.3V
F=125MHz, Vdd=1.8V
ps
ps
F=75MHz, 125MHz, Vdd=2.5V, 2.8V,
3.0V or 3.3V
F=75MHz, 125MHz, Vdd=1.8V
F=75MHz, integration
bandwidth=900kHz to 7.5MHz
F=75MHz, integration bandwidth=12kHz
to 20MHz
10
25.000625
33.33
48
66.666
12
26
33.333
50
66.6666
14
27
33.3333
54
66.66666
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
ASTMLP
RoHS/RoHS II compliant
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual
performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Parameters
Storage Te mperature
VDD
Electrostatic Discharge (HBM)
Soldering Temperature
(follow standard Pb free soldering guidelines)
Junction Temperature (1)
Min.
-65
-0 . 5
Max.
150
4
2000
Unit
°C
V
V
260
°C
150
°C
Note: 1. Exceeding this temperature for extended period of time may damage the device
Thermal Consideration
θJA, 4 Layer Board
(°C/W)
142
97
Package
7.0 x 5.0mm
5.0 x 3.2mm
3.2 x 2.5mm
2.5 x 2.0mm
2.0 x 1.6mm
109
117
152
θJA, 2 Layer Board
(°C/W)
273
199
212
222
252
θJC, Bottom
(°C/W)
30
24
27
26
36
Maximum Operating Junction Temperature (2)
Max. Operating Temperature (ambient)
70°C
85°C
Max. Operating Junction Temperature
80°C
95°C
Note: 2. Datasheet specifications are not guaranteed if junction temperature exceeds the maximum operating junction temperature
PART IDENTIFICATION:
ASTMLP -
Package Size
A: 2.0x1.6mm
D: 2.5x2.0mm
E: 3.2x2.5mm
FL: 5.0x3.2mm
V: 7.0x5.0mm
-
Output Frequency
in MHz
e.g. 7.3728,
125.000
MHz-
Freq. Stability
J: ±20ppm
R: ±25 ppm
C: ±50 ppm
LLC
-
Pin 1 Function
E: Output Enable
S: Standby
N: No Connect
Operating Temp.
E: -20°C ~ +70°C
L: -40°C ~ +85°C
Supply Voltage
Blank: 2.25V~3.63V
18: 1.8V±10%
25: 2.5V±10%
28: 2.8V±10%
30: 3.0V±10%
33: 3.3V±10%
ABRACON IS
ISO9001:2008
CE RTIFIED
-
Packaging
Blank: Bulk
T: Tape & Reel
(1kpcs / reel)
T3: Tape & Reel
(3kpcs / reel)
Output Drive Strength*
Blank: Default
L**
A**
R
B
T
E
U
F
* See Table 1 to 5 for the Rise/Fall times at
different drive strength and available options
** Only available for F=1MHz~110MHz
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
RoHS/RoHS II compliant
ASTMLP
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Table 1: Vdd=1.8V Rise/Fall Times for Specific CLOAD
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
Drive
CLOAD
Strength
5pF
15pF
30pF
45pF
Options
6.16
11.61
22.00
31.27
L
3.19
6.35
11.00
16.01
A
2.11
4.31
7.65
10.77
R
1.65
3.23
5.79
8.18
B
0.93
1.91
3.32
4.66
T
0.78
1.66
2.94
4.09
E
0.70
1.48
2.64
3.68
U
F or Blank
0.65
1.30
2.40
3.35
(default)
60pF
39.91
21.52
14.47
11.08
6.48
5.74
5.09
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
0.93
N/A
T
0.78
N/A
E
0.70
1.48
U
F or Blank
0.65
1.30
(default)
4.56
Table 2: Vdd=2.5V Rise/Fall Times for Specific CLOAD
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
30pF
45pF
4.13
8.25
12.82
21.45
L
2.11
4.27
7.64
11.20
A
1.45
2.81
5.16
7.65
R
1.09
2.20
3.88
5.86
B
0.62
1.28
2.27
3.51
T
E or Blank
0.54
1.00
2.01
3.10
(default)
0.43
0.96
1.81
2.79
U
0.34
0.88
1.64
2.54
F
60pF
27.79
14.49
9.88
7.57
4.45
4.01
3.65
3.32
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
1.45
N/A
R
1.09
N/A
B
0.62
1.28
T
E or Blank
0.54
1.00
(default)
0.43
0.96
U
0.34
0.88
F
Table 3: Vdd=2.8V Rise/Fall Times for Specific CLOAD
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
30pF
45pF
3.77
7.54
12.28
19.57
L
1.94
3.90
7.03
10.24
A
1.29
2.57
4.72
7.01
R
0.97
2.00
3.54
5.43
B
0.55
1.12
2.08
3.22
T
E or Blank
0.44
1.00
1.83
2.82
(default)
0.34
0.88
1.64
2.52
U
0.29
0.81
1.48
2.29
F
ABRACON IS
ISO9001:2008
CE RTIFIED
60pF
25.27
13.34
9.06
6.93
4.08
3.67
3.30
2.99
LLC
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
30pF
1.29
N/A
N/A
R
0.97
N/A
N/A
B
0.55
1.12
N/A
T
N/A
E or Blank
0.44
1.00
(default)
0.34
0.88
N/A
U
0.29
0.81
1.48
F
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
RoHS/RoHS II compliant
ASTMLP
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Table 4: Vdd=3.0V Rise/Fall Times for Specific CLOAD
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
30pF
45pF
3.60
7.21
11.97
18.74
L
1.84
3.71
6.72
9.86
A
1.22
2.46
4.54
6.76
R
0.89
1.92
3.39
5.20
B
T or Blank
0.51
1.00
1.97
3.07
(default)
0.38
0.92
1.72
2.71
E
0.30
0.83
1.55
2.40
U
0.27
0.76
1.39
2.16
F
60pF
24.30
12.68
8.62
6.64
3.90
3.51
3.13
2.85
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
30pF
1.22
N/A
N/A
R
0.89
N/A
N/A
B
N/A
T or Blank
0.51
1.00
(default)
0.38
0.92
N/A
E
0.30
0.83
N/A
U
0.27
0.76
1.39
F
Table 5: Vdd=3.3V Rise/Fall Times for Specific CLOAD
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
30pF
45pF
3.39
6.88
11.63
17.56
L
1.74
3.50
6.38
8.89
A
1.16
2.33
4.29
6.04
R
0.81
1.82
3.22
4.52
B
T or Blank
0.46
1.00
1.86
2.60
(default)
0.33
0.87
1.64
2.30
E
0.28
0.79
1.46
2.05
U
0.25
0.72
1.31
1.83
F
60pF
23.59
12.19
8.34
6.33
3.84
3.35
2.93
2.61
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
CLOAD
Drive Strength
Options
5pF
15pF
30pF
1.16
N/A
N/A
R
0.81
N/A
N/A
B
N/A
T or Blank
0.46
1.00
(default)
0.33
0.87
N/A
E
0.28
0.79
1.46
U
0.25
0.72
1.31
F
CALCULATING MAXIMUM FREQUENCY
Based on the rise and fall time data given in Table 1 through 5, the maximum frequency the oscillator can operate with
a guaranteed full swing of the output voltage over temperature is calculated as follows:
1
Example:
Calculate Fmax of a 1MHz ~ 110MHz device with the following condition:
º Vdd = 1.8V (Table 1)
º Capacitive Load = 30pF
º Desired Tr/f Time: = 3ns (rise/fall time option code “E”)
The Fmax is 66.66666MHz.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
RoHS/RoHS II compliant
ASTMLP
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
All plots are measured with 15pF load at room temperature, unless otherwise stated.
IDD vs. Frequency
1MHz-110MHz Devices
115MHz -137MHz Devices
Frequency vs. Temperature
1MHz-110MHz Devices
ABRACON IS
ISO9001:2008
CE RTIFIED
115MHz -137MHz Devices
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
RoHS/RoHS II compliant
ASTMLP
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
RMS Period Jitter vs. Frequency
1MHz-110MHz Devices
115MHz -137MHz Devices
Duty Cycle vs. Frequency
1MHz-110MHz Devices
ABRACON IS
ISO9001:2008
CE RTIFIED
115MHz -137MHz Devices
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
RoHS/RoHS II compliant
ASTMLP
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
20% - 80% Rise Time vs. Temperature
1MHz-110MHz Devices
115MHz -137MHz Devices
20% - 80% Fall Time vs. Temperature
1MHz-110MHz Devices
ABRACON IS
ISO9001:2008
CE RTIFIED
115MHz -137MHz Devices
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
RoHS/RoHS II compliant
ASTMLP
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
RMS Integrated Phase Jitter Random (12kHz to 20MHz) vs Frequency (3)
1MHz-110MHz Devices
115MHz -137MHz Devices
RMS Integrated Phase Jitter Random (900kHz to 20MHz) vs Frequency (3)
1MHz-110MHz Devices
115MHz -137MHz Devices
Notes: 3. Phase noise plots are measured with Agilent E5052B signal source analyzer. Integration range is up to 5MHz for carrier
frequencies below 40MHz.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
ASTMLP
RoHS/RoHS II compliant
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
OUTLINE DIMENSION:
2.0 x 1.6mm Package (Option “A”)
Recommended Land Pattern
2.5 x 2.0mm Package (Option “D”)
Recommended Land Pattern
3.2 x 2.5mm Package (Option “E”)
Recommended Land Pattern
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
ASTMLP
RoHS/RoHS II compliant
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
OUTLINE DIMENSION:
5.0 x 3.2mm Package (Option “FL”)
Recommended Land Pattern
7.0 x 5.0mm Package (Option “V”)
Recommended Land Pattern
Pin
Name
Output Enable
1
OE/ST
Standby
No Connect
2
3
4
GND
Out
Vdd
Power
Output
Power
Functionality
H or Open (4): specified frequency output
L: output is high impedance. Only output driver is disabled
H or Open (4): specified frequency output
L: output is low (weak pull down). Device goes to sleep
mode. Supply current reduces to Istd.
Any voltage between 0 and Vdd or Open (4): specified
frequency output. Pin 1 has no function.
Electrical ground (5)
Oscillator clock output
Power supply voltage (5)
Notes: 4. In OE or ST mode, a pull-up resistor of <10kΩ between OE/ST pin and Vdd is recommended if pin 1
is not externally driven. If pin 1 needs to be left floating, use the NC option.
5. A capacitor value of 0.1µF between Vdd and GND is required.
Dimensions: mm
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
ASTMLP
RoHS/RoHS II compliant
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
REFLOW PROFILE:
Item
Conditions
TS MAX to TL (Ramp-up Rate)
3°C/second max
Preheat
Temperature Minimum (TS MIN)
150°C
Temperature Typical (TS TYP)
175°C
Temperature Maximum (TS MAX)
200°C
Time (tS)
60 – 180 seconds
Ramp-up Rate (TL to TP)
3°C/second max
Time Maintained Above
Temperature (TL)
217°C
Time (tL)
60 – 150 seconds
Peak Temperature (TP)
260°C max
Target Peak Temperature (TP Target)
255°C
Time within 5°C of actual peak (tP)
20 – 40 seconds
Max. Number of Reflow Cycles
3
Ramp-down Rate
6°C/second max
Time 25°C to Peak Temperature (t)
8 minutes max
TAPE & REEL:
Device Size
2016
2520
3225
5032
7050
D0
1.55±0.05
1.55±0.05
1.5+0.1/0.0
1.5+0.1/0.0
1.5+0.1/0.0
Device Size
2016
2520
3225
5032
7050
ABRACON IS
ISO9001:2008
CE RTIFIED
D1 min.
0.9
1.0
E1
1.75±0.1
1.75±0.1
E2 min.
6.05
5.85
F
3.5±0.05
3.5±0.05
P0
4.0±0.1
4.0±0.1
P1
4.0±0.1
4.0±0.1
P2
2.0±0.05
2.0±0.05
1.0
1.75±0.1
5.95
3.5±0.05
4.0±0.1
4.0±0.1
2.0±0.05
1.5
1.75±0.1
10.25
5.5±0.05
4.0±0.1
8.0±0.1
2.0±0.05
1.5
1.75±0.1
14.25
7.5±0.1
4.0±0.1
8.0±0.1
2.0±0.1
T
0.3±0.05
0.3±0.05
0.2±0.05
0.6
0.6
T1 max.
0.1
0.1
0.1
0.1
0.1
T2 max.
1.55
1.65
1.6
1.65
1.80
W max.
8.3
8.3
8.2
12.3
16.3
LLC
A0
1.9±0.05
2.25±0.05
2.7±0.10
3.5±0.10
5.4±0.10
B0
2.3±0.05
2.8±0.05
3.4±0.10
5.3±0.10
7.4±0.10
K0
1.00±0.10
1.10±0.10
1.15±0.10
1.10±0.10
1.3±0.10
Unit: mm
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Low power, Programmable SMD MEMS Oscillator
ASTMLP
Pb
ASTMLP
RoHS/RoHS II compliant
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TAPE & REEL:
Tape Size
8mm
12mm
16mm
A max.
180
180
330
180
330
Device Size
2016
2520
3225
5032
7050
B min.
1.5
1.5
1.5
1.5
1.5
C
13.0+0.6/-0.2
13.0±0.2
13.0±0.2
13.0±0.2
13.0±0.2
D min.
20.2
20.2
20.2
20.2
20.2
“T” (1k/reel)
8mm Tape
7” Reel
8mm Tape
7” Reel
8mm Tape
7” Reel
12mm Tape
7” Reel
16mm Tape
7” Reel
N
60±0.5
60±0.5
100±0.5
60±0.5
100±0.5
Unit: mm
W1
W2 max.
8.4+1.5/-0
14.4
12.4+2.0/-0
18.4
12.4+2.0/-0
18.4
16.4+2.0/-0
22.4
16.4+2.0/-0
22.4
“T3” (3k/reel)
8mm Tape
7” Reel
8mm Tape
7” Reel
8mm Tape
7” Reel
12mm Tape
13” Reel
16mm Tape
13” Reel
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale