Ultra-low Profile, Low power, SMD MEMS Oscillator ASTMLPT Moisture Sensitivity Level (MSL) – 1 Pb ESD Sensitive FEATURES: RoHS/RoHS II compliant 3.5 x 3.0 x 0.25mm APPLICATIONS: • Ultra-low profile, compact size: 3.5 x 3.0 x 0.25mm • Supply Voltage options: 3.3V, 2.8V, 2.5V, 1.8V • Low Current Consumption: 3.2mA typ. (no load, Vdd=1.8V) • Frequency Stability: ±100ppm over -40 to +85°C • High Performance MEMS Technology by SiTime • Smart cards • SD cards • High capacity SIM cards • Near Field Communications • Multi-chip modules and System-in-package • Portable devices STANDARD SPECIFICATIONS: All electrical specifications in this table are specified with 15pF output load and for all Vdd options unless otherwise stated. Parameters Output Frequency Range (F) Min Typ 1 Max Unit 110 MHz Frequency Stability (Fstab) -100 +100 ppm Aging (Ag) -1 -20 -40 1.71 2.25 2.52 2.97 ppm 1.8 2.5 2.8 3.3 3.7 3.2 +1 +70 +85 1.89 2.75 3.08 3.63 4.1 3.5 2.4 4.3 1.2 2.2 0.4 0.8 LV C M O S 50 50 55 60 1 2 1.3 2.5 Operating Temperature Range (Tuse) Supply Voltage (Vdd) Current Consumption ( Idd ) Standby Current (Istd) Output Type Duty Cycle 45 40 Rise/Fall Time ( Tr /Tf) Output High Voltage (VOH) 90%*Vdd 70%*Vdd Startup Time (Tstart) Resume Time ( Tresume) ABRACON IS ISO9001:2008 CE RTIFIED 3.0 LLC Inclusive of initial tolerance at 25°C, variations over operating temperature, rated power supply voltage change and load change, shock and vibration. 1st year @ 25°C Option “E” Option “L” Option “18” V Option “25” Option “28” Option “33” mA µA % ns V Output Low Voltage (VOL) Output Load (Ld) Input High Voltage(VIH) Input Low Voltage(VIL) °C Notes 10%*Vdd V 15 30%*Vdd pF V V 10 ms 3.8 ms No load, F=20MHz, Vdd=2.5V,2.8V,3.3V No load, F=20MHz, Vdd=1.8V ST=GND, Vdd=3.3V, output is weakly pulled down ST=GND, Vdd=2.5V or 2.8V output is weakly pulled down ST=GND, Vdd=1.8V, output is weakly pulled down All Vdd options. F≤75MHz All Vdd options. F>75MHz 20%-80%, Vdd=2.5V, 2.8V or 3.3V, 15pF load 20%-80%, Vdd=1.8V, 15pF load IOH=-4mA (Vdd=3.3V) IOH=-3mA (Vdd=2.8V or 2.5V) IOH=-2mA (Vdd=1.8V) IOL=4mA (Vdd=3.3V) IOL=3mA (Vdd=2.8V or 2.5V) IOL=2mA (Vdd=1.8V) At max. frequency and supply voltage Pin 1 Pin 1 Measured from the time Vdd reaches its rated minimum value Measured from the time ST pin crosses 50% threshold 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-low Profile, Low power, SMD MEMS Oscillator ASTMLPT Pb RoHS/RoHS II compliant 3.5 x 3.0 x 0.25mm (Continued) Parameters Min Typ Max 4.0 5.5 RMS Period Jitter ( Tjitt) Unit ps 0.6 RMS Phase Jitter (random) ( Tphj) ps Notes F=75MHz, Vdd=2.5V, 2.8V or 3.3V F=75MHz, Vdd=1.8V F=75MHz, integration bandwidth=900kHz to 7.5MHz, Vdd=2.5V, 2.8V or 3.3V F=75MHz, integration bandwidth=900kHz to 7.5MHz,Vdd=1.8V 0.8 Absolute Maximum Ratings Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings. Parameters Storage Te mperature VDD Electrostatic Discharge Theta JA (with copper plane on Vdd and GND) Theta JC (with PCB traces of 0.010 inch to all pins) Soldering Temperature (follow standard Pb free soldering guidelines) Number of Program Writes Program Retention over -40 ~ +125°C, Process, Vdd (0 to 3.65V) Min. -65 -0 . 5 Max. 150 4 6000 75 24 Unit °C V V °C/W °C/W 260 °C 1000+ 1 years PART IDENTIFICATION: ASTMLPT - Supply Voltage 18: 1.8V±5% 25: 2.5V±10% 28: 2.8V±10% 33: 3.3V±10% ABRACON IS ISO9001:2008 CE RTIFIED - Output Frequency in MHz e.g. 7.3728, 100.000 MHz- - - Pin 1 Function S: Standby Operating Temp. E: -20°C ~ +70°C L: -40°C ~ +85°C Freq. Stability Q: ±100ppm LLC Packaging Blank: Bulk T: Tape & Reel (1kpcs / reel) T3: Tape & Reel (3kpcs / reel) 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-low Profile, Low power, SMD MEMS Oscillator ASTMLPT Pb RoHS/RoHS II compliant 3.5 x 3.0 x 0.25mm OUTLINE DIMENSION: Recommended Land Pattern Name 1 ST Standby 2 3 4 GND CLK Vdd Power Output Power Functionality H or Open (1): specified frequency output L: output is low (weak pull down). Oscillation stops. Electrical ground (2) Oscillator clock output Power supply voltage (2) Notes: 1. In 1.8V mode, a resistor of <100kΩ between ST pin and Vdd is recommended. 2. A capacitor value of 0.1µF between Vdd and GND is recommended. Dimensions: mm REFLOW PROFILE: Item TS MAX to TL (Ramp-up Rate) Conditions 3°C/second max Preheat ABRACON IS ISO9001:2008 CE RTIFIED LLC Temperature Minimum (TS MIN) 150°C Temperature Typical (TS TYP) 175°C Temperature Maximum (TS MAX) 200°C Time (tS) 60 – 180 seconds Ramp-up Rate (TL to TP) 3°C/second max Time Maintained Above Temperature (TL) 217°C Time (tL) 60 – 150 seconds Peak Temperature (TP) 260°C max Target Peak Temperature (TP Target) 255°C Time within 5°C of actual peak (tP) 20 – 40 seconds Max. Number of Reflow Cycles 3 Ramp-down Rate 6°C/second max Time 25°C to Peak Temperature (t) 8 minutes max 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-low Profile, Low power, SMD MEMS Oscillator ASTMLPT Pb RoHS/RoHS II compliant 3.5 x 3.0 x 0.25mm TAPE & REEL: Packaging T: 1000pcs/reel T3: 3000pcs/reel D0 1.5+0.1/-0.0 T 0.6 A max. 180 D1 min. 1.5 T1 max. 0.1 B min. 1.5 E1 1.75±0.1 T2 max. 1.65 C 13.0±0.2 E2 min. 10.25 W max. 12.3 F 5.5±0.05 A0 3.3±0.10 D min. 20.2 N 60±0.5 P0 4.0±0.1 B0 3.8±0.10 W1 12.4+2.0/-0 Unit: mm P1 P2 8.0±0.1 2.0±0.05 K0 0.65±0.10 W2 max. 18.4 Unit: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale