Precision SMD TCXO AST3TQ Pb RoHS/RoHS II Compliant ESD Sensitive Moisture Sensitivity Level (MSL) – 3 FEATURES: • Standard available frequencies: 10.00, 12.80, 19.20, 20.00, 25.00, 26.00, 30.72, 38.40 & 40.00MHz • Standard LVCMOS Output • Frequency stabilities to include ±100ppb over -40ºC to +85ºC, ±280ppb over –50ºC to +90ºC and ±500ppb over -55ºC to +95ºC operating temperature range • Excellent Phase Noise, Harmonics and Spurious content • Typical rms jitter of 400fs @ 40MHz carrier & 1.0ps @ 10MHz carrier over 12kHz to 20MHz BW 7.0 x 5.0 x 1.9mm APPLICATIONS: • COTS Military Radios & other Communication Hardware • WiMax, • LTE, BTS • CATV, LAN, LMDS • GPS Tracking with Hold-Over accuracy • Test & Measurement Equipment • Point-to-Point communication networks STANDARD SPECIFICATIONS: Maximum Rating Parameters Rating -55 to +125°C Storage Temperature Range Supply Voltage -0.5 to 6V ESD, HBM/CDM/MM Parameters Frequency Range Standard Frequencies: Initial Frequency Tolerance (@+25°C) at shipping Frequency Stability Options -40°C to +85°C -50°C to +90°C -55°C to +95°C Frequency Stability vs. Supply Voltage Change (Vdd±5%): Frequency Stability vs. Load Change (Load±5%): Supply Voltage (Vdd): Aging (first year @+25°C): Aging (20 years @+25°C): 4kV/2kV/200V Minimum Phase Noise (10MHz carrier frequency @25°C): ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Maximum 10 40 10.00, 12.80, 19.20, 20.00, 25.00, 26.00, 30.72, 38.40, 40.00 +3.135 +3.3 ±3.0 3.0 5.5 Supply Current (Icc) (into 15pF load): CMOS Output VOH: VOL: Load: Duty Cycle: Rise/Fall Time: Waveform: RMS Jitter (12kHz to 20MHz BW) Typical 2.4 45 0.4 Square Wave Units Notes MHz MHz ±0.3 ppm Relative to carrier ±100 ±280 ±500 ppb ppb ppb Option “1” Option “2” Option “5” ±100 ppb ±200 ppb +3.465 ±1.0 ±4.6 4.0 7.0 V ppm ppm 0.4 15 55 4 1.3 -95 mA @40MHz carrier V V pF % ns Load=15pF Load=15pF ps Carrier dependent Offset @10Hz Offset @100Hz -120 -140 @10MHz carrier dBc/Hz @( VOH - VOL)/2 Load=15pF Offset @1kHz -145 Offset @10kHz -150 Offset @100kHz Revised: 12.05.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Precision SMD TCXO AST3TQ Pb RoHS/RoHS II Compliant 7.0 x 5.0 x 1.9mm OPTIONS & PART IDENTIFICATION: (left blank if standard) AST3TQ - MHz - Frequency in MHz Please specify the frequency in MHz. e.g. 19.200MHz th Date of Issue: Dec 4 , 2013 Freq. Stability vs. Operating Temp. AST3TQ Series 1: ±100ppb to +85°C Precisionover SMD-40 TCXO 2: ±280ppb over -50 to +90°C 5: ±500ppb over -55 to +95°C 7.0 x 5.0 x 1.9mm Page (4) of (12) Abracon Drawing # 453795 FREQUENCY STABILITY VS. TEMPERATURE 6.0 ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED - Packaging Blank: Bulk T: 500pcs/reel T2: 2000pcs/reel ESD Sensitive Revision #: Initial Release Frequency Stability vs. Temperature Revised: 12.05.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Precision SMD TCXO AST3TQ Pb RoHS/RoHS II Compliant 7.0 x 5.0 x 1.9mm | TYPICAL PHASE NOISE 10.00 MHz Carrier 20.00 MHz Carrier 40.00 MHz Carrier . ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Revised: 12.05.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | | Precision SMD TCXO AST3TQ Pb RoHS/RoHS II Compliant 7.0 x 5.0 x 1.9mm OUTLINE DIMENSION: Recommended Land Pattern Pin Function 1 2 3 4 * NC GND Output Vdd For factory test only Dime nsions: mm REFLOW PROFILE: ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Revised: 12.05.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Precision SMD TCXO AST3TQ Pb RoHS/RoHS II Compliant 7.0 x 5.0 x 1.9mm TAPE & REEL: Packaging: T: 500pcs/reel T2: 2000pcs/reel MSL-3 packaging applies to MOQ=25 units (cut tape) & T and T2. W 16.0±0.3 E 1.75±0.1 W 16.5±0.4 A 330±0.5 A0 5.7±0.15 D 1.5+0.1/-0.0 N 100±0.3 B0 7.6±0.15 P0 4.0±0.1 T 1.8±0.2 K0 2.4±0.15 P2 2.0±0.1 E 2.1±0.3 P 8.0±0.1 T 0.3±0.05 F 10.75±0.3 F 7.5±0.1 D 13.5+0.5/-0.2 Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Revised: 12.05.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com