Sync'n Go® -- Portable Precision Frequency Reference SYNC-10.00MHz. Pb RoHS Compliant FEATURES: APPLICATIONS: • Stand Alone 10.00MHz Portable Precision Frequency Reference - World Wide Capability • Built-in Stratum-III stability, 10.00MHz Signal tuned into 50Ω's • Synchronization circuitry providing dynamic sync capability, enabling Calibration to a known source such as; a GPS Tracked 10.00MHz reference/10.00MHz Rubidium Source/10.00MHz OCXO based reference • Integrated re-chargeable batteries to provide true stand-alone capability in the field • Once sync'd; guaranteed ±300 ppb stability over 0ºC to 60ºC • Pocket Size - 3.50" * 1.50" * 1.00"; machined aluminum durable enclosure • Accompanied with a Universal AC-DC Charger • Continuously operable at full charge for 10-hours • Ideally suited as an in-field Calibrated Precision 10.00MHz reference for trouble shooting or tuning hardware and Base Station related equipment • Reference source for lab use • Reference source to drive frequency counters and other timing related hardware or instruments • Precision Portable reference for inspection of in-field wireless transmitters STANDARD SPECIFICATIONS: Parameter Input Reference Frequency for Sync Output Reference Frequency Operable Operating Range Synchronization accuracy Frequency Drift post sync (25ºC ± 10ºC) Frequency Drift post sync (25ºC ± 20ºC) Frequency Accuracy Over the operating Temperature Range Load Impedance Charging Time Stand Alone operational time with full charge Phase Noise @ 10.00MHz Carrier 100 1,000 10,000 100,000 1,000,000 Hz offset Hz offset Hz offset Hz offset Hz offset Output amplitude ALL Harmonics rms jitter Description 10.00 10.00 0ºC to +60ºC ±5.00 ±25.00 Value / Units MHz MHz ±50.00 ppb Typical < ±100 ±300 50 4.00 10.00 ppb ppb Typical ppb Typical; Post Sync ppb Maximum; Post Sync Ω Hours maximum Hours minimum -120 -140 -150 -155 -155 dBc/Hz typical dBc/Hz typical dBc/Hz typical dBc/Hz typical dBc/Hz typical 6.0 -30 < 0.50 ps dBm minimum dBc maximum 12kHz to 20MHz BW from the carrier PACKAGE OUTLINE ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.02.11 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Sync'n Go® -- Portable Precision Frequency Reference SYNC-10.00MHz. Pb RoHS Compliant OPERATIONAL MANUAL Charge: 1) 2) 3) 4) Plug 5V charger (or PC or any other USB power source) into a mini-USB port "Bat" LED may turn yellow for a moment to signal that an internal battery is evaluated "Bat" LED will flash green to signal that the battery is being charged "Bat" LED will display solid green when the battery is fully charged Synchronization: 1) 2) 3) 4) 5) 6) Connect a 10MHz standard to the "Ref In" input Press "Synchronize" "Lock" LED will turn-on yellow to signal that "Sync N Go" is evaluating the standard If the reference is stable, the "Lock" LED will turn green to signal that the signal is locked and that the reference information is stored If the reference is not found or it is outside a frequency range or it is not stable, the "Lock" LED will flash red If that occurs, the "Lock" LED turns-off and the "Sync N Go" goes into a sleep mode Output ON (if battery charged): 1) 2) 3) Press "Power" "ON" LED will turn green "Sync N Go" will output a continuous RF signal on the "Out" connector Output ON (if battery low): 1) 2) 3) Press "Power" "ON" LED will turn green. "Sync N Go" will output a continuous RF signal on the "Out" connector. At the same time, "Bat" LED will slowly flash red. Output ON (if battery is discharged): Press "Power" "Bat" LED will rapidly flash red for few seconds and "Sync N Go" will immediately go back to sleep Output OFF: 1) 2) 1) 2) Press "Power" "ON" LED turns off and the "Sync N Go" goes into a sleep mode ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Designed & Manufactured in United States For technical assistance, please contact: [email protected] ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.02.11 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com