THRU-HOLE MICROPROCESSOR CRYSTAL ABL7M Pb FEATURES: • Reduced footprint from the standard HC/49US package • Low profile: 1.8mm typ. height • Tight stability & extended temperature options • High reliability & Cost effective • Resistance welded metal package RoHS / RoHS II Compliant 6.6 x 4.0 x 1.8mm APPLICATIONS: • Wireless Applications • Home electronics • Computers, modems, and communications • Microprocessors STANDARD SPECIFICATIONS: Parameters Frequency Range* Standard Frequencies Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Minimum Typical 12.0 40.0 12.0, 12.288, 13.5, 13.56, 14.31818, 14.7456, 16.0, 18.432, 20.0, 20.5, 24.0, 24.576, 25.0, 26.0, 27.0 MHz MHz +70 +125 +50 ºC ºC ppm See options -50 +50 ppm See options Ω 12.000 ~ 16.000MHz 16.001 ~ 30.000MHz 30.001 ~ 40.000MHz 60 40 25 5 Load capacitance (CL) 18 Drive Level 50 -5 Drive level dependency (DLD) Notes 0 -40 -50 Shunt capacitance (C0) Insulation Resistance Units Fundamental (AT-cut) Equivalent series resistance (R1) @+25°C Aging Maximum See options pF pF 100 µW +5 ppm Standard (See options if other than STD) @25°C±3°C First year @ 100Vdc ± 15V 500 MΩ 10nw ~ 100uw,12 points Change in ESR (Maximum - Minimum) over DLD range < 30% ESR max. * Please contact Abracon for other frequencies. ABRACON IS ISO9001:2008 CE RTIFIED 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 01.06.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale THRU-HOLE MICROPROCESSOR CRYSTAL ABL7M Pb RoHS / RoHS II Compliant 6.6 x 4.0 x 1.8mm PART IDENTIFICATIONS: (Left blank if standard) ABL7M - MHz - - - Frequency in MHz Please specify the frequency in MHz. e.g. 12.000MHz 14.31818MHz Load Capacitance (pF) Please specify CL (Minimum 8pF) in pF or S for series Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Operating Temp. Blank: 0°C ~ +70°C A: -10°C ~ +60°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C J: -40°C ~ +105°C K: -40°C ~ +125°C Freq. Tolerance Blank: ± 50 ppm 1: ± 10 ppm 7: ± 15 ppm 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm Freq. Stability (See Table 1 for details) Blank: ± 50 ppm U: ± 10 ppm G: ± 15 ppm X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm Table 1 Available Combinations of Operating Temp. and Freq. Stability Operating Temp. Freq. Stability U:±10ppm G:±15ppm X:±20ppm W:±25ppm Y:±30ppm A: -10°C ~ +60°C √ Std.: 0°C ~ +70°C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ H:±35ppm Std.:±50ppm Q:±100ppm √ √ √ √ √ √ √ √ √ √ √ √ √ N: -30°C ~ +85°C √ √ √ √ D: -40°C ~ +85°C √ √ √ √ √ √ B: -20°C ~ +70°C C: -30°C ~ +70°C J: -40°C ~ +105°C - K: -40°C ~ +125°C √ Note: Please contact Abracon for other frequency stability and operating temperature range options. ABRACON IS ISO9001:2008 CE RTIFIED 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 01.06.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale THRU-HOLE MICROPROCESSOR CRYSTAL ABL7M Pb RoHS / RoHS II Compliant 6.6 x 4.0 x 1.8mm OUTLINE DIMENSION: 0.260 TYP. 6.60 0.013 ±0.001 0.32 ±0.02 0.098 ±0.008 2.50 ±0.20 0.295 ±0.006 7.50 ±0.15 0.071 TYPE. 1.8 0.157 MAX 4 0.114 ±0.008 2.90 ±0.20 Dimensions: Inches [mm] Packing 500pcs/bag ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 01.06.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale