OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY3 Series Pb FEATURES: • 25.4x 25.4 x 13.0 mm Leaded- RoHS Compliant Reflow-able Package • SC-Cut, High “Q” resonator based design • Either Sinewave or CMOS RF output • Available with ±30 ppb over -40°C to +75°C operating temperature Range • Tighter Stabilities to ±5.0 ppb over 0°C to +50°C also available • Exceptional long-term Aging of ±500 ppb max. over 10-Year Product Life • Excellent close-in phase noise (-140 dBc/Hz Typical @100 Hz offset; 10MHz carrier) RoHS Compliant 25.4x 25.4 x 13.0 mm | | | | | | | | | | | | | | APPLICATIONS: • Cellular Infrastructure • Radar Systems • Test & Measurement Equipment • GPS Tracking with precision hold-over accuracy • WiMax / WLAN STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units RF Output Frequency 10.00 Standard Available Frequencie s 100.00 10.00, 12.80, 13.00, 26.00, MHz Notes Overall Frequency range 38.88, 40.00, 100.00 MHz CMOS Waveform Level "1" (Logic High) 0.9*Vdd Level "0" (Logic Low) 0.1*Vdd Load 15 45 Waveform (Note #1) Volts (Note #1) pf Rise & Fall Time Duty Cycle Volts 6.0 ns 55 % Sinewave Peak Power 2.00 Output Load dBm 50 Short Term Stability 1x10 Ω -10 Alan Variance 75 ºC ±5.00 ppb Default Spec. ±10.00 ppb Option “E” ±30.00 ppb Option “F” ±2.00 ppb ±2.00 ppb ±30.00 ppb Power Consumption @ turn on 3.60 Watts Power Consumption Steady State 1.20 Watts 3.46 Volts Operable Temperature Range -40 /second See Stability Options Frequency Stability Options 0º C to +50ºC (Note #2) -20º C to +70ºC -40º C to +75ºC Frequency Stability vs. Supply Voltage (Vdd ± 5%) Frequency Stability vs. Load Variation (± 10%) Warm-Up @ 25 ºC Supply Voltage (Vdd) Note #1: Note #2: ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE 3.13 3.30 In < 3-minutes See Options When Vdd=12.0V; Level “1” = 4.50 V minimum; Level “0” = 0.50V maximum ±5.00 ppb stability is only available for F0 < 40MHz. For frequencies above 40MHz, the best available frequency stability is ±10.00 ppb over -20°C to +70°C Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.22.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY3 Series RoHS Pb 25.4x 25.4 x 13.0 mm Compliant | | | | | | | | | | | | | | STANDARD SPECIFICATIONS - continued. Parameters Minimum Typical Maximum Units Daily ±1.0 ppb First Year ±100 ppb 10-Years ±500 ppb -35 dBc Notes Aging Spectral Content Spurious Response Phase Noise (10MHz Carrier) @ 5V @ 1 Hz offset -90 dBc @ 10 Hz offset -120 dBc @ 100 Hz offset -140 dBc @ 1,000 Hz offset -145 dBc @ 10,000 Hz offset -155 dBc Vdd Volts Electrical Frequency Adjustment Control Voltage Range (Vc) Frequency Pull Range 0.0 ±0.700 Frequency Pull Slope ppm Positive Control Voltage Port Impedance Center Control Voltage (Note #3) 10 (Vdd/2) -0.5 Control Port Linearity kΩ Vdd/2 (Vdd/2) +0.5 Volts ±10 Center Control Voltage % Reference Voltage (Vdd=3.3V) 2.70 2.80 2.90 Volts Output @ Pin#4 Reference Voltage (Vdd=5.0V) 4.40 4.50 4.60 Volts Output @ Pin#4 Reference Voltage (Vdd=12.0V) Storage Temperature 4.90 5.00 5.10 Volts Output @ Pin#4 +100 ºC Note #3: -40 When Vdd=12.0V, Control Voltage Range is 0.0V to 5.0V and therefore, the Center Control Voltage is (2.50V±0.50V) OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY3 - - Supply Voltage Option Blank: 3.30V A: 5.00V B: 12.00V Frequency in MHz Such as; 10.000 MHz 26.000 MHz 100.000 MHz ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE MHz - RF Output Options Blank: CMOS SW: Sinewave Temperature Options E: -20°C to +70°C F: -40°C to +75°C Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.22.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY3 Series Pb RoHS Compliant 25.4x 25.4 x 13.0 mm | | | | | | | | | | | | | | | OUTLINE DIMENSIONS PACKAGING: 15 pcs/tray REFLOW PROFILE: TS max to TL (Ramp-up Rate) 3°C/second max. Preheat Temperature Min. (TS Min.) 150°C Temperature Typical (T S Typ.) 175°C Temperature Max. (TS Max.) 200°C Time (tS) 60 ~ 180 seconds Ramp-up rate (TL to Tp ) 3°C/second max. Time Maintained Above: --Temperature (TL)/Time (TL) 217°C/60 ~ 150 seconds Peak Temperature (Tp) 250°C max. for 10 seconds Target Peak Temperature (Tp Target) 250°C +0/-5°C Time within 5°C of actual peak (tp) 20 ~ 40 seconds Ramp-down Rate 6°C/second max. Tune 25°C to Peak Temperature (t) 8 minutes max. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.22.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com