GSIB2560-E THRU GSIB25100-E

GSIB2560-E THRU GSIB25100-E
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 600V to 1000V
Current: 25.0A
Features
GSIB-5S
Glass passivated chip junction
Ideal for printed circuit board
High surge current capability
High case dielectric strength
This series is UL listed under Recognized Component Index,
file number E330278
Halogen Free
Mechanical Data
Terminal: Plated leads solderable per J-STD-002
Case: UL-94 Class V-0 recognized Halogen Free Epoxy
Polarity: Polarity symbol marked on body
Mounting position: any
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
Symbol
GSIB2560-E
GSIB2580-E
GSIB25100-E
units
Maximum repetitive peak reverse voltage
Vrrm
600
800
1000
V
Maximum RMS voltage
Vrms
420
560
700
V
Maximum DC blocking voltage
Vdc
600
800
1000
V
If(av)
25.0
3.5
A
Ifsm
350
A
Vf
1.0
V
2
It
500
A Sec
Ir
10.0
350
μA
(Note2)
(Note1)
Rth(ja)
Rth(jc)
22.0
1.0
℃/W
Operating junction and storage temperature range
Tj, Tstg
-55 to +150
℃
Maximum average forward
Tc = 98℃(Note 1)
Rectified output current at
Ta = 25℃(Note 2)
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage drop per
leg at 12.5A
Rating for fusing (t < 8.3ms)
Maximum DC reverse current at
rated DC blocking voltage per leg
Maximum thermal resistance per leg
Ta = 25°C
Ta = 125°C
2
Note:
1. Unit case mounted on Al plate heatsink
2. Unit case mounted on P.C.B. without heatsink
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Rev.A2
RATINGS AND CHARACTERISTIC CURVES GSIB2560-E THRU GSIB25100-E
Rev.A2