G3SBA05 THRU G3BA100 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 4.0A Features GBU Ideal for printed circuit board Glass passivated chip junction High surge current capability This series is UL listed under Recognized Component Index, file number E185029 Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: Thru hole for #6 screw Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol G3SB A05 G3SB A10 G3SB A20 G3SB A40 G3SB A60 G3SB A80 G3SB A100 units Maximum repetitive peak reverse voltage Vrrm 50 100 200 400 600 800 1000 V Maximum RMS voltage Vrms 35 70 140 280 420 560 700 V Maximum DC blocking voltage Vdc 50 100 200 400 600 800 1000 V Maximum average forward rectified Tc = 100℃ (Note 1) output current at Ta = 25℃ (Note 2) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 2.0A Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Maximum thermal resistance per leg Ta = 25°C Ta = 125°C (Note2) (Note1) Operating junction and storage temperature range If(av) 4.0 2.3 A Ifsm 80 A Vf 1.0 V I2t 27 A2Sec Ir 5.0 400 µA Rth(ja) Rth(jc) 26.0 5.0 ℃/W Tj, Tstg -55 to +150 ℃ Note: 1. Unit case mounted on Al. Plate heatsink 2. Units mounted on P.C.B. with 0.5 x 0.5" (12 x 12mm) copper pads, 0.375" (9.5mm) lead length 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw Rev.A8 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES G3SBA05 THRU G3SBA100 Rev.A8 www.gulfsemi.com