GBL06-E SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 600V Current:4.0A Features GBL Glass passivated chip junction High case dielectric strength High surge current capability Ideal for printed circuit board Halogen Free Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Halogen Free Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol GBL06-E units Maximum repetitive peak reverse voltage Vrrm 600 V Maximum RMS voltage Vrms 420 V Maximum DC blocking voltage Vdc 600 V If(av) 4.0 3.0 A Ifsm 150 A Vf 1.0 V I2t 93 A2Sec Maximum average forward Tc = 50 (Note1) rectified output current Ta = 40 (Note2) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 4.0A Rating for fusing (t < 8.3ms) Rth(ja) Rth(jc) 5.0 500 22 3.5 Typical junction capacitance per leg at 4.0V,1MHz Cj 40 Operating junction and storage temperature range Tj, Tstg -55 to +150 Maximum DC reverse current at rated DC blocking voltage per leg Ta = 25°C Ta = 125°C Maximum thermal resistance per leg Ir µA /W pF Note: 1. Unit mounted on P.C.B. with 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Aluminum plate 2. Unit mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5"(12 x 12mm) copper pads Rev.A1 www.gulfsemi.com