RD5CYDT08 IGBT Driver / CMOS Logic Level Shifter REJ03D0181–0400Z Rev.4.00 Jul. 12, 2004 Description The RD5CYDT08 has two–input AND gate in a 5 pin package. This product is suited as IGBT Driver IC for the strobe. Features • Supplied on emboss taping for high-speed automatic mounting. • TTL compatible input level Supply voltage range : 4.0 to 6.0 V Operating temperature range: –40 to +85°C • Logic–level translate function 3.0 V CMOS logic → 5.0 V CMOS logic • High drive current IOH short = –130 mA (min) (@VCC = 5.0 V) • Low sink current IOL short = 40 mA (max) (@VCC = 5.0 V) • Ordering Information Package Part Name RD5CYDT08CME Package Type CMPAK–5 pin Package Code CMPAK–5V Taping Abbreviation Abbreviation CM (Quantity) E (3,000 pcs/reel) CMPAK–5V(O) Outline and Article Indication • RD5CYDT08 Index band Marking D CMPAK–5 Rev.4.00 Jul. 12, 2004 page 1 of 7 4 = Control code RD5CYDT08 Function Table Inputs A L Output Y B L L H L L L H L H H H H : High level L : Low level Pin Arrangement IN B 1 IN A 2 GND 3 5 VCC 4 OUT Y (Top view) Block Diagram A input Y output Internal circuit B input Rev.4.00 Jul. 12, 2004 page 2 of 7 RD5CYDT08 Absolute Maximum Ratings Item Symbol Supply voltage range Input voltage range *1 Ratings Unit VCC –0.5 to 7.0 V Test Conditions VI –0.5 to VCC + 0.5 V Output voltage range *1, 2 VO –0.5 to VCC + 0.5 V Input clamp current IIK ±20 mA Output clamp current IOK ±50 mA VO < 0 or VO > VCC Continuous output current IO –200 mA VO = 0 Continuous current through VCC or GND ICC or IGND ±200 mA Maximum power dissipation *3 at Ta = 25°C (in still air) PT 200 mW Storage temperature Tstg –65 to 150 °C VI < 0 or VI > VCC 100 Notes: VO = VCC The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. When Over shoot / Under shoot pulse width is under 10 ns, input and output voltage permit to –15 V or VCC+1.5 V. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Recommended Operating Conditions Item Symbol Min Max Unit Supply voltage range VCC 4.0 6.0 V Input voltage range VI 0 VCC V Output voltage range VO 0 VCC V Operating free-air temperature Ta –40 85 °C Conditions Note: Unused or floating inputs must be held high or low. Electrical Characteristic Ta = –40 to 85°C Item Input voltage Output current Symbol VCC (V) Min Typ Max VIH 4.5 to 5.5 2.0 — — VIL 4.5 to 5.5 — — 0.8 IOH short 5.0 –100 –130 –160 Unit Test condition V mA VO = 0 V IOL short 5.0 30 40 50 Input current IIN 5.5 — — ±5 µA VIN = 5.5 V or GND Quiescent supply current ICC 5.5 — — 10 µA VIN = VCC or GND, IO = 0 Input capacitance CIN 5.0 — 2.5 — pF VIN = VCC or GND Rev.4.00 Jul. 12, 2004 page 3 of 7 VO = VCC RD5CYDT08 Switching Characteristics VCC = 5.0 ± 0.5 V Item Propagation delay time Symbol Ta = –40 to 85°C Min Typ Max td(ON) — — 70 td(OFF) — — 140 Output rise time tr — — 800 Output fall time tf — — 1500 Rev.4.00 Jul. 12, 2004 page 4 of 7 Unit ns Test Conditions CL = 4000 pF FROM (Input) A or B TO (Output) Y RD5CYDT08 Test Circuit VCC Output Input Pulse generator 50 Ω CL = 4000 pF Note: CL includes probe and jig capacitance. • Waveforms 3V Input 1.5 V 1.5 V GND t d(ON) t d(OFF) tr 90% tf VOH 90% Output 10% Note: Input waveform : duty cycle 50% Rev.4.00 Jul. 12, 2004 page 5 of 7 10% VOL RD5CYDT08 Application Example (Strobe circuit) Luminescence Circuit Trigger trance Xenon tube IGBT Driver Control IC IGBT Combination example SYSTEM IGBT 5.0 V 3.3 V IGBT Driver Control IC CY25BAJ –8F RD5CYD08 5.0 V signal CY25AAJ –8F RD5CYDT08 3.3 V signal CY25BAH–8F RD3CYD08 3.3 V signal IGBT Driver Lineup TYPE No. Specification RD5CYDT08 Vcc = 4.0 to 6.0V TTL level input IOH(short) = -130mA(typ) @ Vcc=5.0V IOL (short) = 40mA(typ) @ Vcc=5.0V RD5CYD08 Vcc = 4.0 to 6.0V CMOS level input IOH(short) = -130mA(typ) @ Vcc=5.0V IOL (short) = 40mA(typ) @ Vcc=5.0V RD3CYD08 Vcc = 2.0 to 3.6V CMOS level input IOH(short) = -130mA(typ) @ Vcc=3.3V IOL (short) = 45mA(typ) @ Vcc=3.3V Package CMPAK-5 IGBT Lineup TYPE No. Specification Package CY25AAJ-8F VCES = 400V(max), ICP = 150A(max), 4V drive CY25BAJ-8F VCES = 400V(max), ICP = 150A(max), 4V drive TSSOP-8 CY25BAH-8F VCES = 400V(max), ICP = 150A(max), 2.5V drive Rev.4.00 Jul. 12, 2004 page 6 of 7 SOP-8 RD5CYDT08 Package Dimensions (0.65) 1.25 ± 0.1 (0.65) 0 – 0.1 (0.2) 2.0 ± 0.2 0.9 ± 0.1 (0.425) 5 – 0.2 ± 0.05 + 0.1 0.15– 0.05 2.1 ± 0.3 1.3 ± 0.2 (0.425) Unit: mm Package Code JEDEC JEITA Mass (reference value) CMPAK–5V — Conforms 0.006 g Unit: mm (1.3) (0.65) (2.1) 0.15 ± 0.05 1.3 ± 0.05* (0.65) 0.025 – 0.1 + 0.1 5 – 0.2 – 0.05 * The value does not include Resin Bar. (One side: 0.15 mm (max)) Rev.4.00 Jul. 12, 2004 page 7 of 7 0.88 (0.1) + 0.02 – 0.03 2.0 ± 0.1* Package Code JEDEC JEITA Mass (reference value) CMPAK–5V(O) — Conforms 0.006 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0