H HiTRON UNIVERSAL INPUT AC-DC INTERNAL OPEN FRAME SWITCHING POWER SUPPLIES 10-12 WATTS SINGLE OUTPUT HVI12 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT LOW-PROFILE PCB FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range typical 90-264Vac. Rating 100 to 240Vac. Input Connector: Molex 5045-NA or JST B3B-XH-A. Input Frequency: 47-63Hz. Inrush Current: Typical 20A at 230Vac. Input Current: Typical 0.34A at 115Vac, Typical 0.17A at 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB.22 & FCC Class B. Hold-up Time: Typical 10mS at 115Vac, Typical 40mS at 230Vac. Leakage Current: Typical 0.3mA at 230Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typical 10-12 Watts. Output Connector: Molex 5045-NA or JST B3B-XH-A. Line Regulation: Typical 0.1%. Load Regulation: Typical ±1-2.0%. Noise & Ripple: Typical 1% peak to peak. OVP: Built-in at main output VO1 (Zener diode). Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typical 70-75%. (various with output voltage) Switching Frequency: Typical 45K Hz. Circuit Topology: Fixed Frequency Flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: Meet IEC 60950-1/UL 60950-1 Class I. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typical 0.04% /°C. Cooling: Free air convection. Construction: PCB open frame format. Power Density: 2.-2.4 Watts / Cubic Inch. NOTE: (1)All measurement are at nominal input, full load and +25°C unless otherwise specifications. (2)Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -53- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT DEFINED OUTPUT VOLTAGE (Vdc) OUPUT VOLTAGE (Vdc) / CURRENT (A) 3.0-4.0V/ 3.0-2.7A, 4.1-5.0V/ 2.6-2.4A, 5.1-6.0V/2.3-2.0A, 6.1-7.0V/ 1.9-1.7A, 7.1-8.0V/ 1.6-1.5A, 8.1-9.0V/ 1.4-1.3A, 9.1-10.0V/ 1.3-1.2A, 10.1-11.0V/ 1.1-1.0A, 11.1-12.0V/ 1.0A, 12.1-13.3V/ 0.9A, 13.4-15.0V/ 0.8A, 15.1-17.1V/ 0.7A, 17.2-20.0V/ 0.6A, 20.1-24.0V/0.5A, 24.0V/ 0.6A. 3.0 Vdc ≤Any Voltage ≤24.0 Vdc Note: Refer to the upper chart or specify the V/A ratings and consult factory for the exact Model No. SINGLE OUTPUT (Model No. for example) MODEL NO. HVI12-03030 HVI12-03329 HVI12-05024 HVI12-09013 HVI12-12010 HVI12-15008 HVI12-18006 HVI12-24005 HVI12-24006 Symbol: "★" OVP built-in. MAIN VO1 ★@ Typ. Volt. 3.0A 3.0V 2.9A 3.3V 2.4A 5.0V 1.3A 9.0V 1.0A 12.0V 0.8A 15.0V 0.6A 18.0V 0.5A 24.0V 0.6A 24.0V "@" Adjustable. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 54.0g (1.9 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT SINGLE OUTPUT ASSIGNMENT AC-LINE AC-NEUTRAL AC-GROUND VO1 DC COM CONNECTOR & PIN # P1-L P1-N P1-G P2-2 P2-1 Mating connector: Molex 5051-N/ JST XHP-3. -54-