H HiTRON UNIVERSAL INPUT AC-DC PCB OPEN FRAME SINGLE OUTPUT 12 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI12 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES LOW-PROFILE PCB FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 10-12 Watts. Output Connector: Molex 5045-NA or JST B3B-XH-A. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2.0%. Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in at main output VO1 (Zener diode). Adjustability: Available at main output VO1. Overload Protection (OLP):. Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Rating 100 to 240Vac. Input Connector: Molex 5045-NA or JST B3B-XH-A. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A @230Vac. Input Current: Typ. 0.34A @115Vac, 0.17A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB.22 & FCC Class B. Hold-up Time: Typ. 10mS @115Vac, 40mS @230Vac. Earth leakage: Typ. 0.3mA @230Vac. GENERAL SPECIFICATION Efficiency: Typ. 70-75%. Operating Temperature: 0 to +50°C. Switching Frequency: Typ. 45K Hz. Storage Temperature: -20 to +85°C. Circuit Topology: Fixed frequency flyback circuit. Temperature Coefficient: Typ. 0.04% /°C. Transient Response: Output voltage returns in Cooling: Free air convection. less than 3mS following a 25% load change. Construction: PCB open frame format. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 2.4 Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -3- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT DEFINED OUTPUT VOLTAGE (Vdc) OUPUT VOLTAGE (Vdc) / CURRENT (A) 3.0-4.0V/ 3.0-2.7A, 4.1-5.0V/ 2.6-2.4A, 5.1-6.0V/2.3-2.0A, 6.1-7.0V/ 1.9-1.7A, 7.1-8.0V/ 1.6-1.5A, 8.1-9.0V/ 1.4-1.3A, 9.1-10.0V/ 1.3-1.2A, 10.1-11.0V/ 1.1-1.0A, 11.1-12.0V/ 1.0A, 12.1-13.3V/ 0.9A, 13.4-15.0V/ 0.8A, 15.1-17.1V/ 0.7A, 17.2-20.0V/ 0.6A, 20.1-24.0V/0.5A, 24.0V/ 0.6A. 3.0 Vdc ≤Any Voltage ≤24.0 Vdc Note: Refer to the upper chart or specify the V/A ratings and consult factory for the exact Model No. SINGLE OUTPUT (Model No. for example) MODEL NO. MAIN VO1 ★@ Volt. Typ. HVI12-03030 3.0V 3.0A HVI12-03329 3.3V 2.9A HVI12-05024 5.0V 2.4A HVI12-09013 9.0V 1.3A HVI12-12010 12.0V 1.0A HVI12-15008 15.0V 0.8A HVI12-18006 18.0V 0.6A HVI12-24005 24.0V 0.5A 24.0V 0.6A HVI12-24006 Symbol: "★" OVP built-in. "@" Adjustable. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 54.0g (1.9 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT SINGLE OUTPUT ASSIGNMENT AC-LINE AC-NEUTRAL AC-GROUND VO1 DC COM CONNECTOR & PIN # P1-L P1-N P1-G P2-2 P2-1 Mating connector: Molex 5051-N/ JST XHP-3. -4-