Flash Part Decoder Parallel NOR Flash (ISA) Part Decoder IS 29 GL 128 H - 70 S L I ISSI prefix Product Family/ Voltage Density Sector for Write Protect/ Boot Sector Temp. Grade Lead-Free Package Package Type Speed • Flash Product Family/ • Density • Sector for Write Protect/ Boot Sector • Package Type Voltage Range 512 = 512Kb T = Top boot Sector JC = 32 pin PLCC B = Bottom boot Sector 29GL = 3V Page Mode 010 = 1Mb VC = 32 pin VSOP (8x14mm) 29/39LV = 3V Industry Standard 040 = 4Mb H = Highest address sector protected T = 48-pin TSOP • Temperature Grade 032 = 32Mb L = Lowest address sector protected B = 48-Ball BGA I = Industrial grade 064 = 64Mb Blank = Industry Standard Parallel CFI 0.80mm pitch, (-40ºC to +85ºC) 128 = 128Mb 6x8mm (Call Factory) A1 = Automotive grade 256 = 256Mb • Speed S = 56-pin TSOP (-40ºC to +85ºC) 70 = 70ns G = 64-Ball BGA call factory 90 = 90ns 1.0mm pitch, Blank = Refer to datasheet 11x13 mm (Call Factory) • Lead-free Package For KGD Solutions (Call Factory) E/L = Lead-Free (Pb Free) Note: Call Factory for KGD and WLCSP Serial NOR Flash (SPI) Part Decoder IS 25 LD 020 - JN L E ISSI prefix Product Family/ Voltage Density Die Rev. Control • Flash Product Family 25xD = Dual SPI 25xQ = Quad SPI 25xP = QPI • Operating Voltage Range 25Lx = 2.3V-3.6V 25Cx = 2.7-3.6V 25Wx = 1.65V-1.95V • Die Rev. Control Blank = First Rev. Temp. Grade Lead-Free Package Package Type • Density 025 = 256Kb 512 = 512Kb 010 = 1Mb 020 = 2Mb 040 = 4Mb 080 = 8Mb 032 = 32Mb 064 = 64Mb 128 = 128Mb 256 = 256Mb • Package Type JM = 16 pin SOIC 300mil JB = 8 pin SOIC 208mil JN = 8 pin SOIC 150mil JD = 8 pin TSSOP JK = 8 pin WSON (5x6 mm) JU = 8 pin USON (2x3mm) JF = 8 pin VSOP 208mil JV = 8 pin VVSOP 150mil JG = 24 ball (BGA 6x8 mm) • Lead-free Package L = Lead-Free (Pb Free) and Halogen Free • Temperature Grade E = Extended grade (-40ºC to +105ºC) A1 = Automotive grade (-40ºC to +85ºC) A2 = Automotive grade (-40ºC to +105ºC) A3 = Automotive grade (-40ºC to +125ºC) Note: Call Factory for KGD and WLCSP SLC NAND Flash Part Decoder IS 34M C 01G A 08 - T S L I ISSI prefix Product Family Voltage Density Die Rev. Control Bus Width • Flash Product Family 34M = NAND • Operating Voltage Range W = 1.8V C = 3.3V • Die Rev. Control Blank = First Rev. Temp. Grade Lead-Free Package Compliance Package Type • Density 512 = 512Mb 01G = 1Gb 02G = 2Gb 04G = 4Gb • Package Type T = 48 pin TSOP1 G = 63 BGA (9x11 mm) Call Factory • Compliance S = Standard Compliant O = ONFI Compliant • Bus Width 08 = x8 16 = x16 Note: Call Factory for KGD and WLCSP www.issi.com • Part Decoder • 2014 • Lead-Free Package L = Lead-Free • Temperature Grade I = Industrial grade (-40ºC to +85ºC) A1 = Automotive grade (-40ºC to +85ºC)