1 2 3 4 5 6 environmental data 1,90 0,03 [0.0748 0.0011 ] c A material data elec. data [0.0445 +0.0007 -0.0019 ] 1,59 +0,07 -0,10 D D 1,13 +0,02 -0,05 B [0.0626 +0.0027 -0.0039 ] 0,88 0,02 [0.0346 0.0007 ] 0,59 +0,02 -0,05 1,90 0,05 [0.0748 0.0019 ] mechanical data D E c 4.4 c CYANOACRYLATE (NON-BLOOMING) 4.5 OPERATIONAL HUMIDITY CONDITIONS 10% RH TO 95% RH OPERATIONAL TEMPERATURE CONDITIONS -25°C TO +55°C 4.3 STORAGE TEMPERATURE -40 $ C TO +60 $ 4.2 CLEANING 4.1 SOLDERING TEMPERATURE 400 $ C [750 $ F] FOR 1 SECOND 3.3 SWITCH CONTACT NICKEL GOLD PLATED ALLOY COPPER 3.2 SOLDER TERMINAL GOLD PLATED SILVER ALLOY 3.1 PLASTIC PARTS GLASS FILLED NYLON 2.3 A AQUA WASH (ALPHA 2100), BENZINE AMMONIA, 10% SOLUTION WITH DEMINERALIZED WATER. c B KNOB DEFLECTION FOR SWITCH CONTACT >0,10mm < 0,33mm / 0,16mm OVERTRAVEL MIN. 2.2 CONTINUOUS CURRENT < 500 mA / 9V 2.1 SWITCH CONTACT RESISTANCE < 150 m ^ 1.9 KNOB RETENTION FORCE >10N SWITCH FORCE AT MAX. TRAVEL(OVER TRAVEL) >115cN to <130cN 1.7 KNOB TRAVEL 0,50mm 1.6 45° ANGLE TO SWITCH OPERATIONAL 1.5 1.4 1.2 MAX. ALLOWED FORCE TO BE APPLIED IN A C 500 cN DIRECTION WITHOUT DAMAGES (MAX. 20 TIMES) MAX. ALLOWED FORCE TO BE APPLIED IN 500 cN OPERATIONAL DIRECTION WITHOUT DAMAGES OPERATIONAL LIFE TIME > 100.000 CYCLES 1.3 SWITCH OPERATIONAL FORCE >30 cN to <90 cN BENDING OF SOLDERING TERMINALS > 4 CYCLES 90° 1.1 PULL STRENGTH OF SOLDERING TERMINALS > 500 cN INITIAL c 0,20 0,05 [0.0079 0.0019 ] SCALE 1,00 F c 2 +0,10 -0,05 [0.0394 3 +0.0039 -0.0019 D C10111584 09/23/10 B C10102732 06/10/05 C REV. c ] 4 function 10:1 E SCALE: A 1 RECOMMENDED GLUE D 24,85 # 1.00 [0.9783 # 0.0393] OPTIONAL TRIMMING HAS A TOLERANCE OF +0 -0,30 [ +0 -.0118 ] c [0.0232 +0.0007 -0.0019 ] c D 4.6 1.8 C 8 7 C10103104 A10100099 CHANGE # 09/08/05 05/22/03 DATE OQ BCS # 0,03 [0.001] ANGLE TOLERANCE: # 1 $ MISMATCH TOLERANCE: # 0,03 [0.001] DATE DESIGNED 03/06/03 NAME RELEASED 6-30-08 PROPRIETARY NOTE: THIS DOCUMENT CONTAINS INFORMATION WHICH IS THE PROPRIETARY PROPERTY OF KNOWLES ELECTRONICS, LLC. OR ITS AFFILIATED ENTITIES. IT IS ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE REPRODUCED, COPIED, USED, OR DISCLOSED TO ANY THIRD PARTY PARTIALLY OR WHOLLY IN ANY MANNER WITHOUT PRIOR WRITTEN PERMISSION OF, AND MUST BE RETURNED UPON REQUEST BY, KNOWLES ELECTRONICS, LLC. 5 FUNDAMENTAL TOLERANCE: BCS BCS 6 MATERIAL: 40:1 CHECKED 6-30-08 C FINISH: C NAME GJP HEAT TREATMENT: BCS GJP refer to detail prints TITLE: 2900 wo/Flanged Housing PRODUCTION RELEASED LEVEL: DRAWING NUMBER: KNOWLES 7 Active REVISION: D SHEETS: 2900-401 1 of 1 8 F