Electronic Components VEAM PT Connectors Rack & Panel Connectors ITT is the world leader in rack and panel connectors, offering unmatched variety of shell configurations and insert arrangements, materials, plating and contact options. Many of our standard and custom designs meet the stringent requirements of ARINC 600, ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards. www.ittcannon.com/rackandpanel Circular/Filter/Hermetic Connectors As a world leader in circular, filter and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configuration for various harsh environments. ITT can also meet numerous specs, including NATO and MIL standards. www.ittcannon.com/circulars • www.ittcannon.com/filter • www.ittcannon.com/hermetics D-Subminiature Connectors Cannon invented D-sub connectors in 1952. Our family of D-Subs now includes combinations of signal, power and RF, as well as severe service sealed connectors. Cannon D-Subs are available with an extensive line of backshells and accessories and are one of the most economical shielded connector solutions available. Qualified to the MIL-DTL-24308 specification. www.ittcannon.com/dsubs Fiber Optic Connectors and Cable Assemblies Cannon fiber optic solutions provide an excellent performance/cost value. Performance can be tailored to the end system, and our use of superior materials and bonding agents provides highly effective solutions. Our wide variety of products includes fiber optic hybrid contacts, multi-channel, rack and panel, and hi-rel assemblies, including MIL and ARINC standard solutions. www.ittcannon.com/fiberoptics Microminiature Connectors Cannon microminiature connectors offer high performance and reliability with exceptional versatility. Available in rectangular, circular and strip configurations for countless applications, many of our connectors meet or exceed applicable requirements of the MIL-DTL-83513 specification. www.ittcannon.com/micro ITT's Electronic Components business (www.ittcannon.com) is an international supplier of connectors, interconnects, cable assemblies, I/O card kits and smart card systems. As a worldwide leader in connector technology for nearly a century, ITT offers one of the industry's broadest product offerings, manufacturing capability worldwide, fast time to market, high volume/high yield capacity, robust design and Value-Based Product Development and an extensive sales and customer support network. VEAM PT Connectors Introduction Company History The Company was originally founded in 1955 by Thorn Electrical Industries as a specialist component manufacturer, and following an alliance with the Bendix Connector Division, Thorn Bendix was formed to lead the development of a variety of electrical connectors including the PT/PTSE range. In 1986 the company was acquired by FKI plc and in 1993 the Company was bought by the management team, becoming TEC Ltd, and processes expanded into the supply of specialized harnesses and assemblies. In October 1999 the Company was acquired by LITTON INDUSTRIES as part of the VEAM Connector Operations Group and was subsequently sold to ITT Industries in 2003 and became part of the ITT Electronic Components Group. Table of Contents Company History...............................................3 Features and Benefits....................................4-5 Glossary of Terms.............................................6 Terminology..............................................7-8 Basic Nomenclature..........................................9 Insert Arrangements..................................10-13 Polarization/Orientation................................14 Jam Nut Variants.......................................15-18 Panel Mount Variants.................................19-24 Plug Variants/CPT Range...........................25-30 Contacts...................................................31-32 Protective Caps...............................................33 Accessories ..............................................34-39 Audio Range..............................................40-41 Connector with Accessories Cross Reference Chart..............................................................42 www.ittcannon.com 3 VEAM PT Connectors Features and Benefits Originally designed and manufactured by VEAM/TEC and now part of the ITT range, these connectors are made to the highest standards within the company’s EN ISO 9001 quality systems. These multiple contact connectors offer equipment designers a high quality, miniature bayonet coupling connection whose components are already well established in the military markets such as fighting vehicles and communications. They are equally suitable for industrial applications where high reliability and cost effectiveness are prime requirements and the extensive range offers a compact, lightweight yet rugged solution for equipment design. The lightweight aluminum shells are plated to offer excellent corrosion resistance. Certain contact arrangements can also accommodate coaxial shielded contacts. PT Connectors PTSE Connectors Our PT (Pattern 105) range fully conforms to the rigorous requirements of British Standard BS9522 F0017. They are also compatible and fully intermateable with connectors meeting the requirements of US military specification MIL-C-26482. The PT range has solder terminations suitable for wire and printed circuit board applications. PTSE (Pattern 603) connectors fully conform to British Standard BS9522 N0001. As with the PT connectors they are compatible and fully intermateable with MIL-C-26482. The PTSE Connectors employ crimp front release rear removable contacts in a clip retention insert. CPT Connectors Audio Connectors The CPT range is a proprietary design and is a commercial version of the PTSE crimp contact connectors. They are intermateable and inter-changeable with the PT and PTSE and offer similar mechanical and electrical performance. Usually supplied with factory bonded prewired contacts for over moulding (see Audio/Specials section). They employ a distortable rubber insert contact retention system. The Audio Connectors are a development of the PT and CPT ranges. They are designed as lightweight, space saving connectors and are manufactured to meet the exacting requirements of modern and professional communications systems. All connectors have been approved by the Royal Signals and DERA Establishment, and have been used extensively on Clansman and Bowman radio systems for the UK Military. Special Requirements ITT has facilities for the design and production of special connectors for specific purposes. Examples are connectors with inbuilt EMI suppression filters, co-axial shielded contacts, special coupling mechanisms plus many alternative shell materials and finishes can be supplied to suit various conditions and applications Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 4 VEAM PT Connectors Features and Benefits • Retained coupling nuts on plugs • Heavy (arctic) ribbed coupling nuts available • Many special variants/platings/materials • Numerous contact arrangements from 2 to 61 contacts • Alternate keyway polarization and insert orientations to prevent cross-plugging • Available with grounding springs for EMC shielding • Positive coupling 3 bayonet pin construction with audible mate • Solder or crimp terminations • Wide range of cable accessories Materials Shells: Insulator: Contacts: High-grade aluminum alloy suitably plated Polychloropene rubber/self extinguishing/resistant to hydraulic fluids, lubricants etc, Gold plated high conductivity copper alloy Environmental Ratings Temperature range Humidity Low air pressure Vibration Shock Bump Acceleration Mechanical endurance Salt mist Sealing (PT series only) -55º to +125ºC 56 days 44 mbar 10 - 5000Hz, 0.75mm/10gn duration 30 hr 981m/s2 (100n) for 6 ms 390 m/s2 (40gn) 4000 bumps 490 m/s2 (50gn) 500 matings Severity 1 to BS2011 Kb (dependent on finish) <1 cm 3/h at 100 kN/m2 (1 bar) Electrical Ratings Proof voltage rating Insulation resistance Contact resistance Shell to shell continuity Current rating @ 85º continuous 2100 or 3000V d.c. or a.c. peak 5000MΩ minimum 5 mΩ maximum 5 mΩ maximum (grounding spring styles) Contact size 20, 5 amps Contact size 16, 10 amps Contact size 12, 20 amps Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 5 VEAM PT Connectors Glossary of Terms Shown below are some standard terms used to describe circular connectors and their features Shell The body of the connector Insert The dielectric or insulating inner core, holds contacts Coupling Nut Outer threaded or grooved ring which holds mated pair together Jam Nut Nut that holds receptacle to a panel Bayonet Coupling A non-threaded, triple ramp type of coupling Contacts The conductive element in a connector that makes the electrical connection between mated connectors Pin Contact* Male half of a mated pair of contacts Socket Contact Female half of a mated pair of contacts Solder Contact A contact to which wire is joined by soldering Crimp Contact A contact to which wire is joined by mechanical compression Plug* (Free) The male half of a mating pair of connectors which may hold male or female insert/contacts Receptacle (Fixed) The female half of a mating pair of connectors which may hold male or female insert/contacts PCB contacts Contacts that can be soldered to a printed circuit board or flex circuit Plating The metal finish applied to contacts and or shell components (protective) Grommet Resilient part at back of insert (attached or separate) gives wire moisture seal Gland Resilient ring in rear accessory provides seal on wire jacket Sealing Plug Plastic peg placed in unused grommet holes to seal Grounding Fingers A metal strap around the plug shell for positive electrical shell to shell connection Hermetic A connector with fused glass insert for air tightness Mating/Un mating Forces Torque required to couple/uncouple a mating pair Backshell An accessory which threads to back of shell Strain Relief A type of accessory which clamps wires for support Potting Boot A type of accessory which forms a mould for potting compound EMI or RFI Backshell A type of accessory to terminate wire/cable shielding Interfacial Seal A resilient gasket on the face of pin inserts gives moisture seal Scoop Proof Is a feature on some ranges of connectors to prevent damage to the pin contacts when mating connector pairs *Note: Male half always goes into female Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 6 VEAM PT Connectors Terminology: Cylindrical Connectors The diagram opposite shows a typical cross-section of a mated pair of connectors, indicating the basic components. Basic Components: 1. Body (Shell) 2. Insert (Dielectric Contact Holder) Pin or Socket 3. Contact (Wire End Termination) (Signal Joining Part) 4. Accessories (Wire Seals, Cable Seals, Wire Support, etc.) Receptacle Coupling Nut Contacts Insert Backshell Plug Grommet Body Styles: Wall Mount Recept. Cable Connecting Recept. Box Mount Recept. Solder Mount Recept. (Hermetic) Jam Nut Recept. Straight Plug Coupling: Bayonet Shell Sizes (typical): 8, 10, 12, 14, 16, 18, 20, 22, 24 Not in PT Style Designation (Typical) Plug 06 08 55 Shell Styles Straight 90º Straight less rear accessory (PT) Plug 00/33 01/44 02 Shell Styles Wall Mount Cable Connecting Box Mount (less rear accessory) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 7 Plug 07 Shell Styles Jam Nut VEAM PT Connectors Terminology: Cylindrical Connectors Inserts • Solder • Crimp Metal Clip Retention Distortable rubber retention Insert (Pin or Socket) Insert & Grommet Accessory May include a soft front interfacial seal (Bonded) if dielectric is hard, and a rear sealing grommet separate or attached. Contacts Pin Crimp* Socket-Crimp* Pin-Solder Socket-Solder Contact sizes: Contact size 22D Not PT 22M Not PT 22 Not PT 20 16 12 8 4 Not PT 0 Not PT AWG Wire Size 22-28 24-28 22-26 20-24 16-20 12-14 8-10 4-6 0-2 Size by Wire Gauge 4/0 AWG 4/0 PCB pin contact PCB socket contact *Crimps are removable PIN SOCKET CRIMP OR SOLDER Usually seperate from insert, shipped loose or in bulk, tools needed to crimp, install and remove Usually installed in insert, frequently bonded in place. PC TAIL CO-AXIAL THERMOCOUPLE Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 8 VEAM PT Connectors PT/PTSE Connectors PT Solder Connectors PTSE Crimp Connectors Part Number Breakdown Part Number Nomenclature for Solder Connector To more easily illustrate ordering procedure, part number PT33A20 41PW(SR) is shown as follows: Part Number Breakdown Proprietary Part Number Construction for Crimp Connectors To more easily illustrate ordering procedure, part number PT33A20 41PW(SR) is shown as follows: PART NUMBER PART NUMBER PT 33 A- 20 - 41 P W (SR) PT 33 A- 1 2 3 4 6 7 8 1 2 3 5 4 5 P W (SR) 6 7 8 See code below: See code below: 1. Connector Families: PT designates standard olive drab Tri-Lock coupling connector. This is the Veam proprietary version of the MIL-C-26482 solder contact connector B59522F0017 (Pattern 105). 1. Connector Families: PT**SE designates standard olive drab Tri-Lock coupling connector with removable crimp contacts. 2. Shell Styles: “33’ designates wall mount receptacle. “55” designates cable connecting plug. “02” designates box mount receptacle. “44” designates in line receptacle. “06” designates cable connect plug with accessory “07” designates jam nut receptacle. “08” designates 90º plug. 2. Shell Styles: “33” designates wall mount receptacle. “55” designates cable connecting plug. “02” designates box mount receptacle. “44” designates in line receptacle. “06” designates cable connect plug with accessory “07” designates jam nut receptacle. “08” designates 90º plug. PTB designates thru-bulkhead receptacle. 3. Service Classes: “SE” designates environmental crimp. The above are proprietary versions of the MIL-C-26482 crimp contact connector. The contact retention mechanism consists of a metal clip held in place by a nylon wafer. 3. Service Classes: “A” designates general duty back shell. “E” designates environmental resisting with grommet and nut. “P” designates potted with potting boot. “W” designates compressing clamp and neoprene gland for moisture-proofing, multi-jacketed cables. “H” designates hermetic seal receptacle. 4.“20” designates shell size. Shell sizes available are 8 through 24. 5.“20-41” designates insert arrangements. 4.“20” designates shell size. Shell sizes available are 8 through 24. 6. “P” designates pin contacts. “S” for socket contacts. 7. “W” designates that insert is rotated in its shell from the standard position to alternate position W. The basic rotations are W, X, Y and Z. No letter required for normal (no rotation) position. The keyways can also be oriented in various positions. The basic rotations are B, C, E and F. 5.“20-41” designates insert arrangements. 6. “P” 20 - 41 designates pin contacts. “S” for socket contacts. 7. “W” designates that insert is rotated in its shell from the standard position to alternate position W. The basic rotations are W, X, Y and Z. No letter required for normal (no rotation) position. The keyways can also be oriented in various positions. The basic rotations are B, C, E and F. 8. “SR” designates a strain relief clamp. Deviation suffixes would be inserted here. For example: (T01) Ribbed coupling Nut. 8. “SR” designates a strain relief clamp. Deviation suffixes would be inserted here. For example: (T01) Ribbed coupling Nut. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 9 VEAM PT Connectors Contact Arrangements PT, PTSE, CPT & Audio Connectors CONTACT ARRANGEMENTS Contact Arrangements Voltage Rating Total Contacts 8-2 8-3 8-4 8-33 8-98 10-2 10-6 10-7 SP 10-98 SP 10-99 12-3 SP 12-4 12-8 12-10 14-2 14-5 14-12 14-15 SP 14-18 14-19 SP 14-22 SP 14-91 16-8 16-23 16-26 SP 16-99 18-11 SP 18-28 SP 18-30 18-32 18-50 SP 18-80 SP 18-98 20-16 SP 20-24 SP 20-25 SP 20-27 20-39 20-41 SP 22-7 SP 22-9 22-21 SP 22-32 SP 22-34 SP 22-36 SP 22-41 22-55 24-61 1 1 1 1 1 2 1 1 1 1 2 2 1 1 2 2 1 1 1 1 1 * 2 1 1 1 2 1 1 1 2 2 1 2 1 1 1 1 1 coax 1 2 1 1 1 1 1 1 2 3 4 3 3 2 6 7 6 7 3 4 8 10 2 5 12 15 18 19 5 3 8 23 26 23 11 28 30 32 2 8 8 16 24 25 27 39 41 7 9 21 32 34 36 41 55 61 Contact Size 20 16 12 Plan forms available in the following range: coax 8 2 3 4 3 3 2 6 7 6 7 4 8 10 3 4 2 8 14 18 19 1 3 22 26 21 26 29 32 5 4 1 4 8 1 2 11 2 1 2 6 4 2 4 16 24 25 27 37 41 2 7 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 21 32 34 36 27 55 61 PT 14 • • • • • • • PTSE CPT AUDIO ** • • • • • • • • • • • • • • • • • • • • • • • • • • KEY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Preferred ranges Non Preferred Consult ITT for other arrangements. VOLTAGE RATING 1 2100 dc or ac peak 2 3000 dc or ac peak • * ** • 5Kv rms See Audio Connectors (pages 00 & 00) for contact arrangements to shell style availability. • • • • • • • • • • SP= Propriety to ITT Corporation Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 10 VEAM PT Connectors Contact Arrangements - Preferred Ranges 8-2 2 X #20 1 B A B C 10-6 6 X #20 1 F A B E D C A G B D C G 12-8 8 X #20 1 A B F E C D 14-5 5 X #16 2 A B E D C A N L K M S J P U T B R C D H 14-18 18 X #20 1 B C B A F E B C G D C G J K F H G B A E J C D A B M K F E C L D M A B LN P C V R U J T S D H G F E K 10-7 7 X #20 1 10-2 2 X #16 2 A B A E 10-98 6 X #20 1 F B D C 12-3 3 X #16 2 A B H 8-4 4 X #20 1 A D B C 8-98 3 X #20 1 A 10-99 7 X #20 1 F E C 8-33 3 X #20 1 A 8-3 3 X #20 1 A 12-4 4 X #16 2 12-10 1 X #20 1 14-2 2 X #12 2 A B A L M B N K R C P J D H G F E 14-12 8 X #20 4 X #16 1 A 14-19 19 X #20 1 B E C G F E Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 11 D 14-15 14 X #20 4 X #16 1 14-22 1 X #20 4 X #12 1 CONTACT LEGEND Contact Arrangement Number of Contacts Size of Contacts Service Rating 8 12 20 coax 16 VEAM PT Connectors Contact Arrangements - Preferred Ranges P A R S N A B C A 14-91 3 X #20 5 KV ms G T S e A U P W D X c E Z b Y M P N Y M F X W G H A S d B T c C U e D V b M a L g E f W Y K W D U V 16-23 22 X #20 1 X #16 1 C T E J H F G A H B K G 18-11 11 X #16 2 C L D F E T S 18-30 29 X #20 1 X #16 1 R A U e d P M 18-32 32 X #20 1 C W j g D X h b E Y Z a G B V f c N F L G H J J F X Z H K E F N G L D V P B Z X K 16-99 21 X #20 2 X #16 1 C U Z R 18-28 26 X #20 2 X #16 1 Y L B T L M J A S J a N D K C d C E 16-26 26 X #20 1 B V H R A B S T C U N a b D M Z V c Y L X W E K F J HG R B F R P 16-8 8 X #16 2 K H J A H 18-50 2 X #8 2 A B A B 18-80 6 X #20 2 X #8 coax 2 C G F E H 18-98 4 X #20 4 X #12 1 B C G D F D E A L B M K M L A S N C J R P D H E G F 20-16 16 X #16 2 W Y a J P C R U G B Z V H N N X K T F S E D 20-24 24 X #20 1 B R P A W M S X C b D T Y E Z a L V F U 20-25 25 X #20 1 G K J H Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 12 VEAM PT Connectors Contact Arrangements - Preferred Ranges A R B P a N S Z M b c d Y X L T D U E V W h g q R F f G J a n b M A F G d V U T m f H F b p G c H d e P E a n t q r g R D Z s h 20-41 41 X #20 1 C Y k i S B X j J K L E c e N H D m p P K Z k r A W 20-39 37 X #20 2 X #16 1 C Y i T B X j U S A W V 20-27 27 X #20 1 C J N M K L A F 22-7 7 Coax G E A N B C 22-9 4 X #20 5 X #12 1 B H J C G D F M B P R W L X V K S J D T U 22-21 21 X #20 2 C E D F H G E N M A P b a L h S c C g Z K X J T d i f Y e U S 22-32 32 X #20 1 D B C V e P c N b k h a M f W g X l j Y X n s c g R H e f N 22-41 27 X #20 14 X #16 1 J P M G d q h F p r S E t i T D b m j V L U S C R P m AA k z i C X CC EE g b v c d f G K L K e a t u w M Z s DD FF D r BB J Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 13 H n j X k E F 22-55 55 X #20 1 a K J Z a GG HH w r EE U q T NN MM DD PP g z BB AA h H k j M L E F G i m N D f y KK LL C e x n P B d JJ CC S p R b A c FF V F H v t s E Y Z b u W D G Y X Y W L B q h c 22-36 36 X #20 1 C g t l M A HH y x h V n p W GG j N d H J T B a k W U A Z m e P G K V f F L F G E Y E H D R B U S 22-34 32 X #20 1 N Z A T U d R V W A T B R J K 24-61 61 X #20 1 VEAM PT Connectors Polarization To avoid cross plugging of similar connectors which may be adjacently mounted, polarization is achieved by shell key/keyways. Up to five alternative positions are available designated N, B, C, E or F. The Diagrams illustrate the angular variation of the keys with the master key being the datum point. Where no specific polarization is requested, the neutral position N will always be applied. Normal Shell Size 8 10 12 14 16 E C B Normal B C E F 1050 1050 1050 1050 1050 85 89 91 93 125 121 119 117 182 115 115 75 75 82 85 85 120 120 Shell Size 18 20 22 24 F Normal B C E F 1050 1050 1050 1050 95 95 97 97 115 115 113 113 75 75 75 75 120 120 120 120 Insert Orientation A E C D A C B E D E A B The diagrams below illustrates the angular displacement of the insert within the housing, for each orientation in the range. This method is non-preferred and is intended for replacement purposes only. B A Y X W Availability N L B 8-2 8-3 8-4 8-33 8-98 L L L L L 14-2 14-5 14-12 14-15 14-18 14-19 14-22 14-91 L L L L L L L L L L L L L L L L 20-16 20-24 20-25 20-27 20-39 20-41 L L L L L L L L L L L L C E F W Z Availability X Y Z E F L I I L L I L I L 10-2 10-6 10-7 10-98 10-99 L L L L L L L L L L L L L L L L L L L L L L I L L L 12-3 12-4 12-8 12-10 L L L L L L L L L L L L L L L L L I L L I I I I L I I I I L L L L L L L L L L L L L L L L L L L L L L L L 16-8 16-23 16-26 16-99 L L L L L L L L L L L L L L L L L L L L 18-11 18-28 18-30 18-32 18-50 18-80 18-98 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L I I I I L L L L I I I I L I I I 22-7 L L L L L I I I I I I I I I I I I I I N B C E F W Availability L L L L L X Y Z I I I I I I I I I I I I I I I I Preferred type Not Available I E E B B C Normal D C D A C D 22-7 22-9 22-21 22-32 22-34 22-36 22-41 22-55 L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L I I N B C W X Y Z I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I N.B. Consult factory for availability of contact arrangements not shown For replacement purposes only Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 14 VEAM PT Connectors How To Order PT Jam nut connectors SERIES/ PREFIX SHELL STYLE SHELL SIZE/ LAYOUT CONTACT TYPE polarization CLASS NOTE 1 NOTE 1 NOTE 2 NOTE 3 NOTE 4 NOTE 5 07 A (22-55) S (B) (T69) PT 77 E PLATING/ MOD CODE P SE How To Order 1 Select the shell style and classification eg. PT07E from following pages. 2 Add the shell size and contact arrangement eg. PT07E22 55 see pages xxx. 3 Add the contacts P=pins, S= sockets eg. PT07E22 55S. 4 For polarization add the relevant letter (E, B, C, F) or for orientation add (W, X, Y, Z) from page 14. For normal orientation no letter required. 5 Add suffix as required from typical list below. No Code 023 T69 T61 T21 T62/T65/T66 Olive drab cadmium plate finish as standard (historically 014) Electroless Nickel plating finish Zinc Cobalt Olive drab plate finish GB62 Zinc Cobalt Black plate finish (ROHS) Marine ally Bronze (contact factory) Pin tail contacts (contact factory) PT07 Cutout Details • Formed locking jam nut standard • Drilled locking nut available at extra cost • Solid locking nut available for size 8/10/12 • Circular lock nut with slots for size 8 available L H Shell Size H ±.005 J Dia. ±.005 K Min Min. L Max. 8 .540 .572 .969 .062 .125 10 .665 .697 1.093 .062 .125 12 .828 .885 1.281 .062 .125 14 .952 1.010 1.406 .062 .125 16 1.078 1.135 1.531 .062 .125 18 1.201 1.260 1.656 .062 .125 20 1.326 1.385 1.843 .062 .250 22 1.451 1.510 1.969 .062 .250 24 1.576 1.635 2.093 .062 .250 J K K PT07 Mounted from rear Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 15 VEAM PT Connectors PT07A Jam Nut Receptacle without rear accessory thread (solder contacts) M Z S Q A R P K ʻAʼ General Duty Shell size tolerance A diameter .003 (0.08) Q diameter .017 (0.43) M depth .031 (0.08) T length max S diameter max K panel thickness min max R jam nut thread 8 0.47 0.750 0.696 0.191 0.956 0.06 0.13 .5625-24 UNEF 10 0.59 0.875 0.696 0.191 1.062 0.06 0.13 .6875-24 UNEF 12 0.75 1.062 0.696 0.191 1.250 0.06 0.13 .8750-20 UNEF 14 0.88 1.188 0.696 0.191 1.375 0.06 0.13 1.000-20 UNEF 16 1.00 1.312 0.696 0.191 1.500 0.06 0.13 1.125-18 UNEF 18 1.13 1.458 0.696 0.191 1.625 0.06 0.13 1.250-18 UNEF 20 1.25 1.562 0.884 0.221 1.812 0.06 0.255 1.375-18 UNEF 22 1.38 1.688 0.884 0.221 1.938 0.06 0.255 1.500-18 UNEF 24 1.50 1.812 0.917 0.188 2.062 0.06 0.255 1.625-18 UNEF PT07E Jam Nut Receptacle with internal rear accessory thread (solder contacts) S Q N M H U KK Shell size TT N diameter .003 (0.08) Q diameter .017 (0.43) M depth .031 (0.08) T length max S diameter max 8 0.473 0.750 0.696 0.568 0.956 0.06 10 0.590 0.875 0.696 0.568 1.062 12 0.750 1.062 0.696 0.568 1.250 14 0.875 1.188 0.696 0.568 16 1.000 1.312 0.696 18 1.125 1.458 20 1.250 1.562 22 1.375 24 1.500 tolerance H panel thickness min max G rear diameter max V jam nut thread 0.125 0.729 .5625-24 UNEF 0.06 0.125 0.854 .6875-24 UNEF 0.06 0.125 0.979 .8750-20 UNEF 1.375 0.06 0.125 1.104 1.000-20 UNEF 0.568 1.500 0.06 0.125 1.229 1.125-18 UNEF 0.696 0.568 1.625 0.06 0.125 1.354 1.250-18 UNEF 0.884 0.63 1.812 0.06 0.250 1.510 1.375-18 UNEF 1.688 0.884 0.63 1.938 0.06 0.250 1.635 1.500-18 UNEF 1.812 0.917 0.66 2.062 0.06 0.250 1.760 1.625-18 UNEF Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 16 VEAM PT Connectors PT77A Jam Nut Receptacle with external rear accessory thread (solder contacts) S Q D P V H U N Shell size K D diameter .003 (0.08) Q diameter .017 (0.43) V depth .031 (0.08) U length max S diameter max 8 0.473 0.750 0.606 0.286 0.956 0.06 10 0.590 0.875 0.606 0.286 1.062 0.06 12 0.750 1.062 0.606 0.286 1.250 14 0.875 1.188 0.606 0.286 16 1.000 1.312 0.606 0.286 18 1.125 1.458 0.606 20 1.250 1.562 22 1.375 24 1.500 tolerance H panel thickness min max K rear diameter max P jam nut thread N rear access thread 0.125 0.436 .5625-24 UNEF .4375-28 UNEF 0.125 0.561 .6875-24 UNEF .5625-24 UNEF 0.06 0.125 0.686 .8750-20 UNEF .6875-24 UNEF 1.375 0.06 0.125 0.811 1.000-20 UNEF .8125-20 UNEF 1.500 0.06 0.125 0.936 1.125-18 UNEF .9375-20 UNEF 0.286 1.625 0.06 0.125 1.061 1.250-18 UNEF 1.0625-18 UNEF 0.764 0.306 1.812 0.06 0.250 1.186 1.375-18 UNEF 1.1875-18 UNEF 1.688 0.764 0.306 1.938 0.06 0.250 1.311 1.500-18 UNEF 1.3125-18 UNEF 1.812 0.782 0.306 2.062 0.06 0.250 1.436 1.625-18 UNEF 1.4375-18 UNEF PT07SE Jam nut Receptacle with internal rear accessory thread (crimp contacts supplied) S Q N M H U TT KK Shell size N diameter .003 (0.08) Q diameter .017 (0.43) M depth .031 (0.08) U length max S diameter max 8 0.473 0.750 0.696 0.376 0.956 0.06 10 0.590 0.875 0.696 0.376 1.062 0.06 12 0.750 1.062 0.696 0.376 1.250 14 0.875 1.188 0.696 0.376 16 1.000 1.312 0.696 18 1.125 1.458 0.696 20 1.250 1.562 22 1.375 24 1.500 tolerance H panel thickness min max KK rear diameter max P jam nut thread TT rear internal thread 0.125 0.719 .5625-24 UNEF .6250-28 UNEF 0.125 0.844 .6875-24 UNEF .7500-24 UNEF 0.06 0.125 0.969 .8750-20 UNEF .8750-24 UNEF 1.375 0.06 0.125 1.094 1.000-20 UNEF 1.000-20 UNEF 0.376 1.500 0.06 0.125 1.219 1.125-18 UNEF 1.125-20 UNEF 0.376 1.625 0.06 0.125 1.344 1.250-18 UNEF 1.250-18 UNEF 0.884 0.391 1.812 0.06 0.250 1.500 1.375-18 UNEF 1.375-18 UNEF 1.688 0.884 0.391 1.938 0.06 0.250 1.625 1.500-18 UNEF 1.500-18 UNEF 1.812 0.917 0.411 2.062 0.06 0.250 1.750 1.625-18 UNEF 1.625-18 UNEF Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 17 VEAM PT Connectors PT77SE Jam Nut Receptacle with external rear accessory thread (crimp contacts supplied loose) S D Q P V H U N Shell size D diameter tolerance .003 (0.08) K Q diameter .017 (0.43) V depth .031 (0.08) U length max S diameter max H panel thickness min max K rear diameter max P jam nut thread N rear access thread 8 0.473 0.750 0.636 0.255 0.956 0.06 0.125 0.436 .5625-24 UNEF .4375-28 UNEF 10 0.590 0.875 0.636 0.255 1.062 0.06 0.125 0.561 .6875-24 UNEF .5625-24 UNEF 12 0.750 1.062 0.636 0.255 1.250 0.06 0.125 0.686 .8750-20 UNEF .6875-24 UNEF 14 0.875 1.188 0.636 0.255 1.375 0.06 0.125 0.811 1.000-20 UNEF .8125-20 UNEF 16 1.000 1.312 0.636 0.255 1.500 0.06 0.125 0.936 1.125-18 UNEF .9375-20 UNEF 18 1.125 1.458 0.636 0.255 1.625 0.06 0.125 1.061 1.250-18 UNEF 1.0625-18 UNEF 20 1.250 1.562 0.794 0.275 1.812 0.06 0.250 1.186 1.375-18 UNEF 1.1875-18 UNEF 22 1.375 1.688 0.794 0.275 1.938 0.06 0.250 1.311 1.500-18 UNEF 1.3125-18 UNEF 24 1.500 1.812 0.812 0.275 2.062 0.06 0.250 1.436 1.625-18 UNEF 1.4375-18 UNEF PT Jam Nut Accessories PT77A LBF 07A PT07SE/77SE LBF GBF HBF Z No Thread GBF HBF 05-1778 Strain Relief Clamp 05-0120 SR and Grommet (see chart) PT77A 05-0186 SR Clamp PT07SE/77A LP LE BE DP 05-0114 External Grommet Clamp Nut BP 05-2042 Potting Boot For dimensional data see accessories section on page’s 33 to 39. Protective caps are located on page 33. For connector supplied complete with relevant accessory please use cross reference chart on page 42 or consult factory. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 18 VEAM PT Connectors How to order Panel Mount Connectors SERIES/ PREFIX PT SHELL STYLE SHELL SIZE/ LAYOUT CONTACT TYPE polarization CLASS NOTE 1 NOTE 1 NOTE 2 NOTE 3 NOTE 4 NOTE 5 (22-55) S (B) (T69) 02 33 A 44 SE PLATING/ MOD CODE P B 00 obsolete How To Order 1 Select the shell style and classification eg. PT02A from following pages. 2 Add the shell size and contact arrangement eg. PT02A22 55 see pages xxx. 3 Add the contacts P=pins, S= sockets eg. PT02A22 55S. 4 For polarization add the relevant letter (E, B, C, F) or for orientation add (W, X, Y, Z) from page 14. For normal orientation no letter required. 5 Add suffix as required from typical list below. No Code 023 T69 T61 T21 T62/T65/T66 Olive drab cadmium plate finish as standard (historically 014) Electroless Nickel plating finish Zinc Cobalt Olive drab plate finish GB62 Zinc Cobalt Black plate finish (ROHS) Marine ally Bronze (contact factory) Pin tail contacts (contact factory) Panel Mount Cut-Out Details Front Mount A A Rear Mount E max. panel thickness to prevent interference with rear fittings C 4 holes A A B B D D minimum adjacent piercing A minimum adjacent piercing t.p. B Dia. +.000 —.010 C Dia. +.004 —.002 Min. .594 .458 .120 .843 10 .719 .583 .120 12 .812 .708 .120 14 .906 .833 .120 16 .969 .958 18 1.062 20 1.156 22 24 Shell Size 8 C 4 holes D E A PTOO Mounted from front with rear fittings PTOO Mounted from rear t.p. C Dia. +.004 —.002 .594 .120 10 .719 .120 12 .812 .120 .100 14 .906 .120 1.156 .983 .100 1.250 .100 16 .969 .120 1.250 1.108 .100 .120 1.343 .100 18 1.062 .120 1.343 1.233 .100 .120 1.469 .160 20 1.156 .120 1.469 1.359 .230 1.333 .120 1.593 .160 22 1.250 .120 1.593 1.493 .230 1.458 .147 1.718 .100 24 1.375 .147 1.718 1.614 .230 Max. Shell Size .100 8 .969 .100 1.062 .100 1.156 .120 1.083 1.208 1.250 1.375 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 19 D Min. F Dia. +.000 —.010 E Max. .843 .580 .100 .969 .700 .100 1.062 .859 .100 VEAM PT Connectors PT02 Box Mount Receptacle without rear accessory thread (solder contacts) L N tolerance M length 0.01 L depth 0.825 R S Z K A diameter .003 (0.08) T holes R A Shell size T dia S M N rear diameter 0.01 R hole space S width 0.016 T hole diameter 0.005 8 0.473 0.431 0.825 0.449 0.594 0.812 0.120 10 0.590 0.431 0.825 0.573 0.719 0.938 0.120 12 0.750 0.431 0.825 0.699 0.812 1.031 0.120 14 0.875 0.431 0.825 0.823 0.906 1.125 0.120 16 1.000 0.431 0.825 0.949 0.969 1.219 0.120 18 1.125 0.431 0.825 1.073 1.062 1.312 0.120 20 1.250 0.556 1.076 1.199 1.156 1.438 0.120 22 1.375 0.556 1.076 1.323 1.250 1.562 0.120 24 1.500 0.589 1.109 1.449 1.375 1.688 0.147 PT33A Wall Mount Receptacle with external rear accessory thread (solder contacts) L M Z POLARIZING GROOVE Q THD. T DIA 4 MTG. HOLES A DIA. K S SOLDER Shell size .140 RAD. MAX. R (TP) M length 0.01 L depth 0.020 K thickness 0.01 Z length 0.04 KK rear diameter 0.01 R hole space S width Q thread tolerance A diameter .003 (0.08) 8 0.473 0.431 0.887 0.062 0.594 0.438 0.594 0.812 .4375-28 UNEF 10 0.590 0.431 0.887 0.062 0.394 0.562 0.719 0.938 .5625-24 UNEF 12 0.750 0.431 0.887 0.062 0.394 0.688 0.812 1.031 .6875-24 UNEF 14 0.875 0.431 0.887 0.062 0.394 0.812 0.906 1.125 .8125-20 UNEF 16 1.000 0.431 0.887 0.062 0.394 0.938 0.969 1.219 .9375-20 UNEF 18 1.125 0.431 0.887 0.062 0.394 1.062 1.062 1.312 1.0625-18 UNEF 20 1.250 0.556 1.105 0.094 0.455 1.188 1.156 1.438 1.1875-18 UNEF 22 1.375 0.556 1.105 0.094 0.455 1.312 1.250 1.562 1.3125-18 UNEF 24 1.500 0.589 1.105 0.094 0.422 1.438 1.375 1.688 1.4375-18 UNEF Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 20 VEAM PT Connectors PT02SE Box Mount Receptacle without rear accessory thread (crimp contacts) L POLARIZING GROOVE M A DIA. T DIA 4 MTG. HOLES N DIA. R (TP) K .140 RAD. MAX. S Shell size tolerance A diameter .003 (0.08) M length 0.01 L depth 0.020 K thickness 0.01 Z length 0.04 N rear diameter 0.01 R hole space S width 8 0.473 0.431 0.825 0.062 0.594 0.469 0.594 0.828 10 0.590 0.431 0.825 0.062 0.394 0.593 0.719 0.954 12 0.750 0.431 0.825 0.062 0.394 0.719 0.812 1.047 14 0.875 0.431 0.825 0.062 0.394 0.843 0.906 1.141 16 1.000 0.431 0.825 0.062 0.394 0.969 0.969 1.234 18 1.125 0.431 0.825 0.062 0.394 1.093 1.062 1.328 20 1.250 0.556 1.011 0.094 0.455 1.219 1.156 1.453 22 1.375 0.556 1.011 0.094 0.455 1.343 1.250 1.578 24 1.500 0.589 1.011 0.094 0.422 1.469 1.375 1.702 PT33SE Receptacle with external rear accessory thread (crimp contacts supplied) POLARIZING GROOVE K Q THD. M GROMMET FOR TYPES E&F T DIA. 4 MTG. HOLES A DIA. CRIMP shell size R (TP) GROMMET FOR TYPES A, B, J & P .140 RAD. MAX. S A diameter .003 (0.08) M length 0.016 Z length 0.04 N rear diameter 0.01 Q thread S width R hole space 8 0.473 0.431 0.948 0.469 .4375-28 UNEF 0.828 0.594 10 0.590 0.431 0.948 0.593 .5625-24 UNEF 0.954 0.719 12 0.750 0.431 0.948 0.719 .6875-24 UNEF 1.047 0.812 14 0.875 0.431 0.948 0.843 .8125-20 UNEF 1.141 0.906 16 1.000 0.431 0.948 0.969 .9375-20 UNEF 1.234 0.969 18 1.125 0.431 0.948 1.093 1.0625-18 UNEF 1.328 1.062 20 1.250 0.556 1.166 1.219 1.1875-18 UNEF 1.453 1.156 22 1.375 0.556 1.166 1.343 1.3125-18 UNEF 1.578 1.250 24 1.500 0.589 1.166 1.469 1.4375-18 UNEF 1.703 1.375 tolerance Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 21 VEAM PT Connectors PT44A Line Connecting Receptacle (no fixing holes) with rear accessory thread solder contacts L Q S M Y A S K Z Shell size M length 0.016 Y diameter 0.02 Z length 0.04 N rear diameter 0.01 Q thread S width tolerance A diameter .003 (0.08) 8 0.473 0.400 0.938 0.948 0.469 .4375-28 UNEF 0.812 10 0.590 0.400 1.062 0.948 0.593 .5625-24 UNEF 0.938 12 0.750 0.400 1.156 0.948 0.719 .6875-24 UNEF 1.031 14 0.875 0.400 1.25 0.948 0.843 .8125-20 UNEF 1.125 16 1.000 0.400 1.344 0.948 0.969 .9375-20 UNEF 1.219 18 1.125 0.400 1.438 0.948 1.093 1.0625-18 UNEF 1.312 20 1.250 0.535 1.562 1.166 1.219 1.1875-18 UNEF 1.438 22 1.375 0.535 1.688 1.166 1.343 1.3125-18 UNEF 1.562 24 1.500 0.568 1.812 1.166 1.469 1.4375-18 UNEF 1.688 PT44SE Line Connecting Receptacle (no fixing holes) with rear accessory thread (crimp contacts supplied) SEE TERMINATION ASSEMBLY H P Q THD. POLARIZING GROOVE Y DIA. A DIA. GROMMET FOR TYPES A, B, J & P Shell size CRIMP GROMMET FOR TYPES E & F S P length 0.031 H panel thickness 0.094 S width Y diameter Q thread tolerance A diameter .003 (0.08) 8 0.473 0.400 0.094 0.828 0.958 .4375-28 UNEF 10 0.590 0.400 0.094 0.954 1.082 .5625-24 UNEF 12 0.750 0.400 0.094 1.047 1.176 .6875-24 UNEF 14 0.875 0.400 0.094 1.141 1.270 .8125-20 UNEF 16 1.000 0.400 0.094 1.234 1.364 .9375-20 UNEF 18 1.125 0.400 0.094 1.328 1.458 1.0625-18 UNEF 20 1.250 0.535 0.115 1.453 1.582 1.1875-18 UNEF 22 1.375 0.535 0.115 1.578 1.708 1.3125-18 UNEF 24 1.500 0.535 0.115 1.703 1.832 1.4375-18 UNEF Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 22 VEAM PT Connectors PTB Thru Bulkhead Connector T DIA. 4 MTG. HOLES POLARIZING GROOVE L PIN SIDE A A SKT SIDE M R (TP) K shell size A diameter .003 (0.08) M length 0.031 8 0.473 0.562 1.125 0.828 0.594 0.062 10 0.590 0.562 1.125 0.954 0.719 0.062 12 0.750 0.562 1.125 1.047 0.812 0.062 14 0.875 0.562 1.125 1.141 0.906 0.062 16 1.000 0.562 1.125 1.234 0.969 0.062 18 1.125 0.562 1.125 1.328 1.062 0.062 20 1.250 0.688 1.406 1.453 1.156 0.094 22 1.375 0.688 1.406 1.578 1.250 0.094 24 1.500 0.688 1.406 1.703 1.375 0.009 tolerance L S width R hole space 1.125 .140 RAD. MAX. S TYP This connector is a thru-bulkhead version with double faced non-removable pin and socket insert construction allowing mating from both ends for applications requiring the disconnection of a power source from either side of a panel, or where air leakage requirements are critical. K panel thickness 0.016 Dummy Stowage Connector 05-0167-XX N T DIA. 4 MTG. HOLES POLARIZING GROOVE To complete receptacle part number replace xx with shell size and add plating mod code from “How to Order” section on page 19. R (TP) .140 RAD. MAX. 0a Size S TYP R Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 23 Diameter N Depth Oa Mating R Thickness 8 0.473 0.493 0.300 0.080 10 0.590 0.493 0.300 0.080 12 0.750 0.493 0.300 0.080 14 0.875 0.493 0.300 0.080 16 1.000 0.493 0.300 0.080 18 1.125 0.493 0.300 0.080 20 1.250 0.587 0.360 0.110 22 1.375 0.587 0.360 0.110 24 1.500 0.620 0.360 0.110 VEAM PT Connectors Flange Mount Gaskets 05-0368-xx S D (4 HOLES) S R F 8 Hole Diameter D 0.13 Hole to Hole R 0.594 Width S 0.812 Thick T 0.031 10 0.13 0.719 0.958 0.031 12 0.13 0.813 1.031 0.031 14 0.13 0.906 1.123 0.031 16 0.13 0.969 1.219 0.031 18 0.13 1.065 1.312 0.031 20 0.13 1.156 1.438 0.031 22 0.13 1.250 1.565 0.031 24 0.13 1.373 1.658 0.031 Size T R PT Panel Mount Accessories 02 PT33A/44A LA V THD PT33SE/44SE LBF HBF GBF DA .395 (10.03) Min. GBF HBF Type A Z No Thread PT33A/44A LBF 05-1778 strain relief clamp 05-0120 SR and grommet 05-0532 adaptor PT33A/44A LE PT33SE/44SE PT33A/44A LP BP C 05-2042 potting boot AF DP AC BE 05-0114 external grommet clamp nut 05-0186 SR Clamp D 05-2330 W sealing gland For dimensional data see accessories section on page’s 33 to 39 Protective caps are located on page 33. For connector supplied complete with relevant accessory please use cross reference chart on page 42 or consult factory Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 24 VEAM PT Connectors How To Order PT Plug Connectors PT plugs can be supplied with or without grounding springs, designated by G in part number. Heavy ribbed (Arctic) coupling nuts are specified by adding T01 in mod code. SERIES/ PREFIX PT SHELL STYLE SHELL SIZE/ LAYOUT CONTACT TYPE polarization CLASS NOTE 1 NOTE 1 NOTE 2 NOTE 3 NOTE 4 NOTE 5 55 A (22-55) S (B) (T69) PTG SE P How To Order 1 Select the shell style and classification eg. PT55A from following pages. 2 Add the shell size and contact arrangement eg. PT55A22 55 see pages xxx. 3 Add the contacts P=pins, S= sockets eg. PT55A22 55S. 4 For polarization add the relevant letter (E, B, C, F) or for orientation add (W, X, Y, Z) from page 14. For normal orientation no letter required. 5 Add suffix as required from typical list below. No Code 23 SR T01 T02 T21 T62/T65/T66 T69 Olive drab cadmium plate finish as standard (historically014) Electroless Nickel plating finish Strain Relief Ribbed coupling nut Ribbed coupling nut and strain relief Marine ally Bronze (contact factory) Pin tail contacts (contact factory) Zinc cobalt olive drab plate finish Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 25 PLATING/ MOD CODE VEAM PT Connectors PT55A Straight Plug with Solder Contacts L Z J G Q Shell Size G J Z L Q diameter mate depth body thread tolerance .003 (0.08) 0.01 8 .765 0.353 0.594 0.906 .4375-28 UNEF 10 .840 0.353 0.594 0.906 .5625-24 UNEF 12 .999 0.353 0.594 0.906 .6875-24 UNEF 14 1.139 0.353 0.594 0.906 .8125-20 UNEF 16 1.261 0.353 0.594 0.906 .9375-20 UNEF 18 1.337 0.353 0.594 0.906 1.0625-18 UNEF 20 1.477 0.415 0.672 1.062 1.1875-18 UNEF 22 1.602 0.415 0.672 1.062 1.3125-18 UNEF 24 1.723 0.415 0.672 1.125 1.4375-18 UNEF PTG55A Straight Plug with Grounding Spring and Solder Contacts L J Z G Q Shell Size G J Z L Q diameter mate depth body thread tolerance .003 (0.08) 0.01 8 .765 0.353 0.594 0.906 .4375-28 UNEF 10 .840 0.353 0.594 0.906 .5625-24 UNEF 12 .999 0.353 0.594 0.906 .6875-24 UNEF 14 1.139 0.353 0.594 0.906 .8125-20 UNEF 16 1.261 0.353 0.594 0.906 .9375-20 UNEF 18 1.337 0.353 0.594 0.906 1.0625-18 UNEF 20 1.477 0.415 0.672 1.062 1.1875-18 UNEF 22 1.602 0.415 0.672 1.062 1.3125-18 UNEF 24 1.723 0.415 0.672 1.125 1.4375-18 UNEF Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 26 VEAM PT Connectors PT55SE Straight Plug with Crimp Contacts L Q J Shell Size G G J L Q diameter mate depth thread 1.900 .4375-28 UNEF tolerance .003 (0.08) 0.01 8 .765 0.353 10 .859 0.353 1.900 .5625-24 UNEF 12 1.031 0.353 1.900 .6875-24 UNEF 14 1.156 0.353 1.900 .8125-20 UNEF 16 1.281 0.353 1.987 .9375-20 UNEF 18 1.391 0.353 1.987 1.0625-18 UNEF 20 1.531 0.415 2.087 1.1875-18 UNEF 22 1.656 0.415 2.087 1.3125-18 UNEF 24 1.776 0.415 2.149 1.4375-18 UNEF PTG55SE Straight Plug with Grounding Fingers and Crimp Contacts L Q J Shell Size tolerance G G J L Q diameter mate depth thread .003 (0.08) 0.01 8 .765 0.353 1.900 .4375-28 UNEF 10 .859 0.353 1.900 .5625-24 UNEF 12 1.031 0.353 1.900 .6875-24 UNEF 14 1.156 0.353 1.900 .8125-20 UNEF 16 1.281 0.353 1.987 .9375-20 UNEF 18 1.391 0.353 1.987 1.0625-18 UNEF 20 1.531 0.415 2.087 1.1875-18 UNEF 22 1.656 0.415 2.087 1.3125-18 UNEF 24 1.776 0.415 2.149 1.4375-18 UNEF Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 27 VEAM PT Connectors PT55A (T01) Straight Plug with Ribbed Coupling Nut and Solder Contacts A H F Thread Om E Shell Size tolerance B D Om H F diameter coupling nut dia mate depth thread .003 (0.08) 0.038 0.01 8 0.64 0.825 0.301 0.906 .4375-28 UNEF 10 0.756 0.937 0.301 0.906 .5625-24 UNEF 12 0.940 1.109 0.301 0.906 .6875-24 UNEF 14 1.063 1.234 0.301 0.906 .8125-20 UNEF 16 1.197 1.437 0.301 0.906 .9375-20 UNEF 18 1.308 1.548 0.301 0.906 1.0625-18 UNEF 20 1.430 1.67 0.301 1.062 1.1875-18 UNEF 22 1.565 1.78 0.341 1.062 1.3125-18 UNEF 24 1.678 1.905 0.341 1.125 1.4375-18 UNEF PTG55A (T01) Straight Plug with Grounding Spring/Ribbed Coupling Nut and Solder Contacts A H F Thread Om E Shell Size B D Om H F diameter coupling nut dia mate depth thread tolerance .003 (0.08) 0.038 0.01 8 0.64 0.825 0.301 0.906 .4375-28 UNEF 10 0.756 0.937 0.301 0.906 .5625-24 UNEF 12 0.940 1.109 0.301 0.906 .6875-24 UNEF 14 1.063 1.234 0.301 0.906 .8125-20 UNEF 16 1.197 1.437 0.301 0.906 .9375-20 UNEF 18 1.308 1.548 0.301 0.906 1.0625-18 UNEF 20 1.430 1.67 0.301 1.062 1.1875-18 UNEF 22 1.565 1.78 0.341 1.062 1.3125-18 UNEF 24 1.678 1.905 0.341 1.125 1.4375-18 UNEF Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 28 VEAM PT Connectors PT55SE (T01) Straight Plug with Grounding Fingers/Ribbed Coupling Nut and Crimp Contacts A H F Thread Om E Shell Size B D Om H F diameter coupling nut dia mate depth thread tolerance .003 (0.08) 0.038 0.01 8 0.765 0.825 0.353 1.900 .4375-28 UNEF 10 0.859 0.937 0.353 1.900 .5625-24 UNEF 12 1.031 1.109 0.353 1.900 .6875-24 UNEF 14 1.156 1.234 0.353 1.900 .8125-20 UNEF 16 1.281 1.437 0.353 1.978 .9375-20 UNEF 18 1.391 1.548 0.353 1.978 1.0625-18 UNEF 20 1.531 1.67 0.415 2.087 1.1875-18 UNEF 22 1.656 1.78 0.415 2.087 1.3125-18 UNEF 24 1.776 1.905 0.415 2.149 1.4375-18 UNEF PTG55SE (T01) Straight Plug with Grounding Fingers/Ribbed Coupling Nut and Crimp Contacts A H F Thread Om E Shell Size B D Om H F diameter coupling nut dia mate depth thread tolerance .003 (0.08) 0.038 0.01 8 0.765 0.825 0.353 1.900 .4375-28 UNEF 10 0.859 0.937 0.353 1.900 .5625-24 UNEF 12 1.031 1.109 0.353 1.900 .6875-24 UNEF 14 1.156 1.234 0.353 1.900 .8125-20 UNEF 16 1.281 1.437 0.353 1.978 .9375-20 UNEF 18 1.391 1.548 0.353 1.978 1.0625-18 UNEF 20 1.531 1.67 0.415 2.087 1.1875-18 UNEF 22 1.656 1.78 0.415 2.087 1.3125-18 UNEF 24 1.776 1.905 0.415 2.149 1.4375-18 UNEF Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 29 VEAM PT Connectors PT Plug Accessories PT55/PTG55 PT55/PTG55 PT55/PTG55 LE LA V THD C AF AC BE DA .395 (10.03) Min. D Type A 05-0114 external grommet clamp nut 05-0532 adaptor PT55A/PTG55A 05-2330 W sealing gland PT55/PTSE/PTG55/PTSE PT55SE/PTG55SE LBF LBF GBF HBF 05-1778 strain relief clamp 05-0120 SR and grommet LP GBF 05-0186 SR Clamp HBF DP BP 05-2042 potting boot For dimensional data see accessories section on page’s 33 to 39. For connector supplied complete with relevant accessory please use cross reference chart on page 42 or consult factory. Strain relief clamps are not supplied with cable clamp grommet, which should be ordered separately from data on page 33. Protective caps are located on page 33. CPT Connectors • The CPT range is a proprietary design and is a commercial version of the PTSE crimp contact connectors, available in shell sizes 8 to 18. • Since they use standard PT hardware they are dimensionally similar to that range, and all relevant dimensions can be obtained from that section of this catalog. • They are intermateable and interchangeable with PT and PTSE ranges and offer similar mechanical and electrical performance. • CPT connectors can be supplied with or without contacts. Details of CPT contacts can be found in the “contacts” section of this catalog. Available CPT variants in shell sizes 8 thru 18 • CPT77A jam nut receptacle with external rear accessory thread (crimp contacts) • CPT07E jam nut receptacle with internal rear accessory thread (crimp contacts) • CPT02 mount receptacle with without rear accessory thread (crimp contacts) • CPT33A wall mount receptacle with external rear accessory thread (crimp contacts) • CPT44A line connecting receptacle (no fixing holes) with rear accessory thread (crimp contacts) • CPT55A straight plug with standard coupling nut (crimp contacts) • CPT55AT01 straight plug with ribbed coupling nut (crimp contacts) • CPTG55A straight plug with standard coupling nut/grounding spring (crimp contacts) • CPTG55AT01 straight plug with ribbed coupling nut/grounding spring (crimp contacts) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 30 VEAM PT Connectors Crimp Contacts Insertion & Removal Insertion Tools Insertion Remove the connector rear accessories that may be fitted and thread them on to the cables. Locate wire and crimped contact in the tool, insert the contact in to the relevant contact cavity from the rear. Maintain alignment with the axis of the connector until the contact is located in the correct position. With PTSE connectors a slight click may be heard as the positive stop is felt. All contacts must be fitted and sealing plugs used behind any contacts that are not wired. Removal Remove the connector back fittings. Align the tool over the front of the contact and maintain gentle pressure on the tool while pushing forward to eject the contact. With PTSE range the tip of the tool must locate in the contact retention device. Do not attempt to tilt or rotate the tool within the connector. Contacts Insertion Extraction Tool Crimp Tool Locator 20 PTSE 05-2231-20 05-2230-20 M22520/1-01 M22520/1-02 20 PTSE 05-0407-20 05-2230-20 M22520/1-01 M22520/1-02 16 PTSE 05-2231-20 05-2230-16 M22520/1-01 M22520/1-02 16 PTSE 05-2231-20 05-2230-20 M22520/1-01 M22520/1-02 20&20/22CPT 05-0484-20 05-0485-20 11-7295 05-0026 16CPT 05-2231-16 05-2230-16 11-7295 Supplied with tool A43240 Removal Kit Crimp Tool Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 31 VEAM PT Connectors Contacts, Tools & Assembly (PTSE, CPT) SEALING PLUGS PTSE CONTACTS size Part Number Part Number Color Wires Aw 20 Pin 05-1124 Socket 05-2376 05-2661-A20 red 24, 22 & 20 20 Pin 05-1127 Socket 05-1128 05-2661-A20 red 24, 22 & 20 16 Pin 05-1130 Socket 05-1131 05-2661-16 blue 18 & 16 12 Pin 05-1133 Socket 05-1134 05-2661-12 yellow 14 & 12 SEALING PLUGS CPT CONTACTS size Part Number Shell Size Part Number Color Wires Awg 20 Pin 05-1136 Socket 05-1138 8-18 05-2661-A20 red 24, 22 & 20 20/22 Pin 05-1171 Socket 05-1173 8-18 05-2661-A20 red 24, 22 & ?? 16 Pin 05-1142 Socket 05-1144 8-18 05-2661-16 blue 18 & 16 CPT contacts are available for Shellsizes 8 thru 18 only. Size 20 solder contact Nominal rating: 5 amps Stripping length: 1/8” Size 12 solder contact Nominal rating: 24 amps Stripping length: 3/16” Size 16 solder contact Nominal rating: 15 amps Stripping length: 3/16” Size 16 contact S.E. range Nominal rating: 15 amps Stripping length: 1/4” Size 20 contacts S.E. range Nominal rating: 15 amps Stripping length: _” Size 12 contacts S.E. range Nominal rating: 24 amps Stripping length: 1/4” Co axial contacts S.E. range for RG. 180/U 3 RG. 195/U cables or equivalents Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 32 VEAM PT Connectors Accessories Panel Mount Protection Caps Shell Size Wall/box c/w chain Wall/box c/w cord In-line c/w chain In-line c/w cord Cap only N diameter .001 variance Length .015 variance 8 10-101960-8 05-0517-8 10-101961-8 05-0537-8 10-123094-8 0.734 0.562 10 10-101960-10 05-0517-10 10-101961-10 05-0537-10 10-123094-10 0.859 0.562 12 10-101960-12 05-0517-12 10-101961-12 05-0537-12 10-123094-12 1.000 0.562 14 10-101960-14 05-0517-14 10-101961-14 05-0537-14 10-123094-14 1.125 0.562 16 10-101960-16 05-0517-16 10-101961-16 05-0537-16 10-123094-16 1.250 0.562 18 10-101960-18 05-0517-18 10-101961-18 05-0537-18 10-123094-18 1.375 0.562 20 10-101960-20 05-0517-20 10-101961-20 05-0537-20 10-123094-20 1.500 0.562 22 10-101960-22 05-0517-22 10-101961-22 05-0537-22 10-123094-22 1.625 0.562 24 10-101960-24 05-0517-24 10-101961-24 05-0537-24 10-123094-24 1.750 0.602 Jam Nut Protection Caps Cable Clamp Grommets Part Numbers Shell Size With Chain With Cord Cap Only N diameter .001 Variance Length .015 Variance Size 8 10-36565-101 10-36565-122 Part 8 10-101964-8 05-0527-8 10-123094-8 0.076 0.572 10 10 10-101964-10 05-0527-10 10-123094-10 0.816 0.572 12 10-36565-143 12 10-101964-12 05-0527-12 10-123094-12 1.000 0.57 14 10-36565-163 14 10-101964-14 05-0527-14 10-123094-14 1.128 0.572 16 10-36565-183 16 10-101964-16 05-0527-16 10-123094-16 1.267 0.572 18 10-101964-18 05-0527-18 10-123094-18 1.367 0.572 18 10-36565-203 20 10-36565-203 20 10-101964-20 05-0527-20 10-123094-20 1.496 0.572 22 10-101964-22 05-0527-22 10-123094-22 1.624 0.572 22 10-36565-244 24 10-101964-24 05-0527-24 10-123094-24 1.747 0.612 24 10-36565-232 A molded resilient grommet that is designed for use in the jaws of all strain relief clamps, forming a firm grip on the cable sheath. The cable clamp grommet is always specified as a separate item when ordering the clamps. Plug Protection Caps Shell Size With chain With cord Cap only N diameter .001 variance Length .015 variance 8 05-0057-8 05-0507-8 05-0056-8 0.473 0.532 10 05-0057-10 05-0507-10 05-0056-10 0.590 0.532 12 05-0057-12 05-0507-12 05-0056-12 0.750 0.532 14 05-0057-14 05-0507-14 05-0056-14 0.875 0.532 16 05-0057-16 05-0507-16 05-0056-16 1.000 0.532 18 05-0057-18 05-0507-18 05-0056-18 1.125 0.532 20 05-0057-20 05-0507-20 05-0056-20 1.250 0.594 22 05-0057-22 05-0507-22 05-0056-22 1.375 0.594 24 05-0057-24 05-0507-24 05-0056-24 1.500 0.627 Protective caps are also available with ribbed grip feature, and in other materials such as Nylon 66 and Stainless Steel. Please consult factory. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 33 To complete protective cap part numbers add link length as follows + plate finish. 30=3” 35=3.5” 40=4” 45=4.5” 50=5” 60=6” 70=7” 80=8” etc. Plate finish = see how to order section for each connector type for mod code required. ie 05-0527-8-70-T69 to receive jam nut receptacle cap with cord for size 8 with &” cord and zinc cobalt plate. VEAM PT Connectors A Threaded Type Adapter 05 0532 XX øD THD øC max. øF UNEF - 2B øB Max. A max. To correctly specify accessory part number replace XX with shell size required and plating needed which can be found in How to order section of each connector type. ie 05 0532 8 T69 Size Front Thread F Rear Thread D Length A Diameter B 8 7/16 x 28UNEF 1/2 x 28UNEF 0.935 0.590 10 9/16 x 24UNEF 5/8 x 24UNEF 0.935 0.720 12 11/16 x 24UNEF 3/4 x 20UNEF 0.935 0.850 14 13/16 x 20UNEF 7/8 x 20UNEF 0.935 0.980 16 15/16 x 20UNEF 1 x 20UNEF 0.935 1.096 18 1 1/16 x 18UNEF 1 3/16 x 18UNEF 0.935 1.210 20 1 3/16 x 18UNEF 1 3/16 x 18UNEF 0.935 1.350 22 1 5/16 x 18UNEF 1 7/16 x 18UNEF 0.935 1.480 24 1 7/16 x 18unef 1 7/16 x 18UNEF 0.935 1.600 E Type Grommet Clamp Nut 05 0114 XX XX A F THREAD 0a To correctly specify accessory part number replace XX with insert arrangement required and plating needed which can be found in How to order section of each connector type. ie 05 0114 8 98 T69 Size Front Thread F Cable Diameter C Length A 8 7/16 x 28UNEF 0.600 0.650 Diameter D 0.190 10 9/16 x 24UNEF 0.730 0.650 0.190 12 11/16 x 24UNEF 0.860 0.650 0.190 14 13/16 x 20UNEF 0.990 0.650 0.190 16 15/16 x 20UNEF 1.110 0.650 0.190 18 1 1/16 x 18UNEF 1.240 0.650 0.190 20 1 3/16 x 18UNEF 1.360 0.680 0.190 22 1 5/16 x 18UNEF 1.480 0.680 0.190 24 1 7/16 x 18unef 1.510 0.680 0.190 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 34 VEAM PT Connectors Strain Relief Clamps LSR G D H NSR SR SR SR C 05-1778-XX Basic SR clamp 05-0120-XX-XX with Grommet 05-1886-XX for SE connector To correctly specify accessory part number replace XX with shell size/insert layout required and plating needed which can be found in How to order section of each connector type. Cable clamp grommet sold separately. See page 33. Size Front Thread Diameter N Max Clamp Width H Cable Size G Length L Grommet P/N 8 7/16 x 28UNEF 0.550 0.812 0.125 1.761 10-36565-101 10 9/16 x 24UNEF 0.675 0.875 0.188 1.761 10-36565-122 12 11/16 x 24UNEF 0.803 1.000 0.312 1.761 10-36565-143 14 13/16 x 20UNEF 0.920 1.125 0.375 1.761 10-36565-163 16 15/16 x 20UNEF 0.047 1.188 0.500 1.893 10-36565-183 18 1 1/16 x 18UNEF 1.165 1.438 0.625 1.893 10-36565-203 20 1 3/16 x 18UNEF 1.290 1.438 0.625 2.081 10-36565-203 22 1 5/16 x 18UNEF 1.418 1.719 0.750 2.081 10-36565-244 24 1 7/16 x 18unef 1.543 1.750 0.800 2.143 10-36565-232 W Type Sealing Gland 05 2330 XX øD MAX. øC MAX. UNEF - 2B øF A To correctly specify accessory part number replace XX with shell size required and plating needed which can be found in How to order section of each connector type. ie 05 2330 8 T69 Size Front Thread F Cable Diameter C Length A Diameter D 8 7/16 x 28UNEF 0.230 1.055 0.560 10 9/16 x 24UNEF 0.312 1.055 0.684 12 11/16 x 24UNEF 0.442 1.155 0.810 14 13/16 x 20UNEF 0.539 1.300 0.935 16 15/16 x 20UNEF 0.614 1.524 1.060 18 1 1/16 x 18UNEF 0.672 1.724 1.185 20 1 3/16 x 18UNEF 0.744 1.925 1.310 22 1 5/16 x 18UNEF 0.844 2.135 1.435 24 1 7/16 x 18unef 0.890 2.175 1.560 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 35 VEAM PT Connectors P Type Potting Boot 05 2042 XX LP DP BP To correctly specify accessory part number replace XX with shell size required and plating needed which can be found in How to order section of each connector type. ie 05 2042 8 T69 Size Front Thread F Diameter B Length L Outlet Size D 8 7/16 x 28UNEF 0.608 1.526 0.317 10 9/16 x 24UNEF 0.734 1.526 0.434 12 11/16 x 24UNEF 0.858 1.526 0.548 14 13/16 x 20UNEF 0.984 1.526 0.673 16 15/16 x 20UNEF 1.110 1.526 0.798 18 1 1/16 x 18UNEF 1.234 1.526 0.899 20 1 3/16 x 18UNEF 1.360 1.646 1.024 22 1 5/16 x 18UNEF 1.484 1.646 1.149 24 1 7/16 x 18unef 1.610 1.646 1.274 Straight Outlet for Def Stan Cable 05 2058 XX N ØT max. ØF UNEF-2B X A/F ØS max. cable To correctly specify accessory part number replace XX with shell size required and plating needed which can be found in How to order section of each connector type. ie 05 2058 12 T69 Size Front Thread F Diameter T Length N Max Cable Size 8 7/16 x 28UNEF 0.690 2.020 0.283 10 9/16 x 24UNEF 0.760 2.020 0.343 12 11/16 x 24UNEF 0.856 2.492 0.465 14 13/16 x 20UNEF 1.044 2.516 0.492 16 15/16 x 20UNEF 1.174 2.640 0.575 18 Consult Factory 20 1 3/16 x 18UNEF 1.404 2.640 0.657 22 Consult Factory 24 1 7/16 x 18UNEF 1.654 3.015 0.800 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 36 VEAM PT Connectors 75 Degree Outlet with Strain Relief Clamp 995 7732 0XX (replacement part for 05-2060 75 degree outlet with sealing gland) C B D A THREAD O-RING .0 18 AX M Front Thread A Diameter B Length D+18mm 8 7/16 x 28UNEF 17.3mm 24.6mm Max Cable Size Consult Factory 10 9/16 x 24UNEF 20.3mm 25.4mm Consult Factory 12 11/16 x 24UNEF 23.8mm 25.8mm Consult Factory 14 13/16 x 20UNEF 26.8mm 26.7mm Consult Factory 16 15/16 x 20UNEF 29.8mm 27.5mm Consult Factory 18 Consult Factory 33.3mm 27.8mm Consult Factory 20 1 3/16 x 18UNEF 36.3mm 28.6mm Consult Factory 22 Consult Factory 39.8mm 29.0mm Consult Factory 24 1 7/16 x 18UNEF 42.8mm 29.9mm Consult Factory H Size G To correctly specify accessory part number replace XX with shell size required and plating needed which can be found in How to order section of each connector type. Original backshell was two part open Architecture variant. ie. 05 2060 16 T69 90 Degree 1 Piece Outlet with Strain Relief Clamp 995 7711 0XX (replacement part for 05-1774 two piece outlet with integral clamp) E A THREAD B O-RING Front Thread A Diameter B Length F+18mm 8 7/16 x 28UNEF 17.3mm 24.6mm Max Cable Size Consult Factory 10 9/16 x 24UNEF 20.3mm 25.4mm Consult Factory 12 11/16 x 24UNEF 23.8mm 25.8mm Consult Factory 14 13/16 x 20UNEF 26.8mm 26.7mm Consult Factory 16 15/16 x 20UNEF 29.8mm 27.5mm Consult Factory 18 Consult Factory 33.3mm 27.8mm Consult Factory 20 1 3/16 x 18UNEF 36.3mm 28.6mm Consult Factory 22 Consult Factory 39.8mm 29.0mm Consult Factory 24 1 7/16 x 18UNEF 42.8mm 29.9mm Consult Factory 18.0 MAX Size F To correctly specify accessory part number replace XX with shell size required and plating needed which can be found in How to order section of each connector type. Original backshell was two part open Architecture variant. ie 05 1774 16 T69 G Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 37 H VEAM PT Connectors Special Accessories (Contact factory for further examples) L • 05-3226 screw-on direct harness Adapter F D B L F D • 05-3228 long screw-on cable support B L D F B • 05-0564 short screw-on cable support L D F • 05-3229 long screw-on Adapter with screentrap B Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 38 VEAM PT Connectors Special Adapter Dimensions PART SHELL SIZE B DIAMETER F THREAD L LENGTH D CABLE DIAMETER 005-0364-81 8 0.593 .5000 x 28unef 1.185 0.195 05-0364-82 8 0.593 .5000 x 28unef 1.185 0.250 05-3226-1 8 0.593 .5000 x 28unef 0.997 na 05-3228-1 8 0.593 .5000 x 28unef 0.563 0.210 05-3228-11 8 0.593 .5000 x 28unef 2.1320 0.210 05-3228-2 8 0.593 .5000 x 28unef 0.563 0.250 05-3229-1 8 0.593 .5000 x 28unef 1.185 0.997 05-3229-11 8 0.593 .5000 x 28unef 2.760 0.997 05-3229-2 8 0.593 .5000 x 28unef 1.185 0.997 05-0364-101 10 0.719 .6250 x 24unef 1.360 0.195 05-0364-102 10 0.719 .6250 x 24unef 1.360 0.250 05-0364-103 10 0.719 .6250 x 24unef 1.360 0.281 05-0326-2 10 0.719 .6250 x 24unef 1.047 na 05-3228-10 10 0.719 .6250 x 24unef 2.088 0.317 05-3228-3 10 0.719 .6250 x 24unef 0.688 0.195 05-3228-4 10 0.719 .6250 x 24unef 0.688 0.250 05-3228-5 10 0.719 .6250 x 24unef 0.688 0.281 05-3228-7 10 0.719 .6250 x 24unef 2.088 0.215 05-3228-8 10 0.719 .6250 x 24unef 2.088 0.255 05-3228-9 10 0.719 .6250 x 24unef 2.088 0.290 05-3229-10 10 0.719 .6250 x 24unef 2.760 1.047 05-3229-3 10 0.719 .6250 x 24unef 1.360 1.047 05-3229-4 10 0.719 .6250 x 24unef 1.360 1.047 05-3229-5 10 0.719 .6250 x 24unef 1.360 1.047 05-3229-7 10 0.719 .6250 x 24unef 2.760 1.047 05-3229-8 10 0.719 .6250 x 24unef 2.760 1.047 05-3229-9 10 0.719 .6250 x 24unef 2.760 1.047 05-0364-123 12 0.843 .7500 x 20unef 1.310 0.385 05-3226-3 12 0.843 .7500 x 20unef 1.042 na 05-3228-6 12 0.843 .7500 x 20unef 0.643 0.385 05-3229-3 12 0.843 .7500 x 20unef 1.310 1.042 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 39 VEAM PT Connectors Audio Connectors To complete Audio connector part numbers replace xx with insert arrangement, contact gender, orientation and plating finish. crimp contacts 05-1311-XX crimp contacts for lightweight tinsel cable 05-2467-XX crimp contacts non preferred use 051093 05-0943-XX 12-10 10-99 10-7 10-6 10-2 • • • • • • SD3/229879 RSRE 040/01 • • • Deft STAN 61-12 (pt 7) crimp contacts • • • Deft STAN 61-12 (pt 7) crimp contacts crimp contacts 05-1312-XX crimp contacts for lightweight tinsel cable 05-1630-XX crimp contacts non preferred use 05 1312 05-2040-XX • • • SD3/229879 RSRE 040/01 SD4/24127 BS.6500 table 16 SD3/229879 RSRE 040/01 crimp contacts STRAIGHT PLUG (quick release) • • • • • • • • • • • • • solder contacts crimp contacts for lightweight tinsel cable STRAIGHT PLUGS (quick release) SD3/229879 RSRE 040/01 05-2041-XX 05-1093-XX STRAIGHT PLUG (bayonet coupling) 8-98 Deft STAN 61-12 (pt 7) crimp contacts 05-0596-XX STRAIGHT PLUGS (bayonet coupling) CABLE 8-4 CONNECTOR STYLE 8-33 ARRANGEMENTS PART NUMBER & DESCRIPTION • • • • • • • 05-2468-XX crimp contacts non preferred use 05 2040 Deft STAN 61-12 (pt 7) crimp contacts • • • Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 40 VEAM PT Connectors Audio Connectors 05-0599-XX solder contacts, ‘O’ ring seal, hexagonal nut only 12-10 10-99 10-7 10-6 10-2 8-98 CABLE 8-33 CONNECTOR STYLE 8-4 ARRANGEMENTS PART NUMBER & DESCRIPTION OPEN WIRING • • • • • • OPEN WIRING • • • • 05-1626-XX solder contacts, hexagonal nut only 05-2676-XX PANEL MOUNTING RECEPTACLES (bayonet coupling) solder contacts, ‘O’ ring seal, hexagonal nut only non preferred use 05 0599 05-1319-XX OPEN WIRING OPEN WIRING solder contacts, ring nut only 05-1318-XX • • • • • • • • OPEN WIRING • • • • SD3/229879 RSRE 040/01 • • • solder contacts, no fittings PANEL MOUNTING RECEPTACLES 05-0771-XX crimp contacts 05-1941-XX LINE CONNECTING RECEPTACLES Def STAN 61-12 (pt 4) 7-2-6C solder contacts 05-1320-XX 90 DEGREE PLUG crimp contacts for lightweight tinsel cable solder contacts SD4/246127 BS.6500 table 16 05-2049-XX solder contacts 05-2339-XX 90 DEGREE PLUGS SD3/229879 RSRE 040/01 Deft STAN 61-12 (pt 4) 7-2-6C 05-1505-XX solder contacts, and screen termination outlet Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 41 • Deft STAN 61-12 (pt 4) 7-2-6C • • • • • • • • • • • • • • NA NA PT06SE PT06SE(T01) PTG06SE PTG06SE(T01) NA NA NA NA NA CPTG06E CPTG06E(T01) NA NA NA NA NA PT00E NA CPT00E NA CPTG06A(T02) NA NA NA NA NA PT00A(SR) NA CPT00A(SR) NA CPTG06A(T01) NA NA NA NA NA PT00A NA CPT00A NA NA PT55SE PT55SE(T01) PTG55SE PTG55SE(T01) PT02 PT33A CPT02 CPT33A PT02SE PT33SE 42 PTB NA NA NA NA NA NA PT07E PT07SE PT77A CPT77A PT77SE NA PT44SE PT07A PT01A CPT01A PT07SE NA NA PT07SE(T11) NA PT07E(T11) CPT07E(T11) NA NA NA NA NA NA NA NA NA PT01SE NA NA NA NA NA NA PT01E CPT01E PT01A(SR) CPT01A(SR) NA PT44A NA NA NA CPT44A PT00SE NA NA CPTG55A(T01) NA PTG06E(T01) PTG06A(T02) CPTG06A CPTG06A(SR) PTG06A(T01) CPTG55A NA PTG55A(T01) NA PT06E PTG06A PTG55A CPT06E(T01) CPT06A(T01) CPT55A(T01) PTG06A(SR) CPT06A CPT06A(T01) A TYPE ADAPTOR 05-0532-X NA A TYPE SR CLAMP 05-1778-XX CPT06E E TYPE CLAMP NUT 05-0114-XX-XX CPT06A(SR) SE TYPE CLAMP NUT 05-0184-XX CPT55A E TYPE SR CLAMP 05-0120-XX-XX PT06E(SR) PT07SE(SR) NA NA PT07SE(T12) NA PT07E(T12) CPT07E(T12) NA PT01SE(SR) NA NA NA NA NA PT01E(SR) CPT01E(SR) NA NA NA NA NA PT00SE(SR) NA CPT00E(SR) NA NA NA NA NA NA PTG06SE(T02) PTG06SE(SR) PT06SE(T02) PT06SE(SR) NA NA NA NA NA NA PT00E(SR) NA NA NA NA NA CPTG06E(T02) CPTG06E(SR) PTG06E(T01) PTG06E(SR) CPT06E(T02) CPT06E(SR) NA NA SE TYPE SR CLAMP 05-0186-XX-XX PT06E(T01) NA NA NA NA PT00W NA CPT00W NA NA NA NA PT00P(SR) NA CPT00P(SR) PT06SP PT06SP(T01) PTG06SP PTG06SP(T01) NA PT00P NA CPT00P NA NA NA NA NA NA NA NA NA NA NA NA NA PT07SP PT07P(T11) CPT07P(T11) PT07SP(T11) NA PT01SP NA NA NA PT01W CPT01W PT01P(SR) CPT01P(SR) PT01P CPT01P NA NA NA CPTG06P(T01) NA CPTG06W(T01) CPTG06P(T02) CPTG06P NA CPTG06W CPTG06P(SR) PTG06P(T01) NA PTG06W(T01) PTG06P(T02) NA PTG06W PTG06P(SR) PTG06P NA CPT06W(T01) CPT06P(T02) CPT06P(T01) NA CPT06W CPT06P(SR) CPT06P PT00SP PT06W PT06W(T01) PT06PSR PT06P(T02) PT06P PT06P(T01) P TYPE POTTING BOOT 05-2042-XX NA P TYPE SR CLAMP 05-1778-XX NA W TYPE SEALING GLAND 05-2330-XX PT06E NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA CPTG66(T01) CPTG66 PTG66(T01) PTG66 CPT666(T01) CPT66 PT66(T01) PT66 STRAIGHT OUTLET 05-2058-XX-XX PTG06E(T01) NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA PTG66SE(T01) PTG66SE PT66SE(T01) PT66SE NA NA NA NA NA NA NA NA SE STRAIGHT OUTLET 05-2309-XX-XX PT06A(SR) NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA CPTG88(T01) CPTG88 PTG88(T01) PTG88 CPT88(T01) CPT88 PT88(T01) PT88 75 DEGREE OUTLET 05-2060-XX-XX PT06A(T01) NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA PTG88SE(T01) PTG88SE PT88SE(T01) PT88SE NA NA NA NA NA NA NA NA 75 DEGREE OUTLET 05-2311-XX-XX PT06A NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA PTG08SE(T01) PTG08SE PT08SE(T01) PT08SE CPTG08A(T01) CPTG08A PTG08A(T01) PTG08A CPT08A(T01) CPT08A PT08A(T01) PT08A A TYPE 90 DEGREE ELBOW 05-1774-XX PT06A(T01) NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA CPTG08E(T01) CPTG08E PTG08E(T01) PTG08E CPT08E(T01) CPT08E PT08E(T01) PT08E GROMMET 05-1774-XX + PT55A E TYPE 90 DEGREE ELBOW WITH PT55A(T01) VEAM PT Connectors Connector Plus Crossreference Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com Product Safety Information THIS NOTE MUST BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOG. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOG COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. (iii) Other important information Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. Product Warranty ITT Electronic Components, a Division of ITT Corporation manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (ii) Temperature All information given are temperature limits. The operation temperature depends on the individual application. www.ittcannon.com 43 “Engineered for life” is a registered trademark of ITT Corporation ©2006. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice. VEAM PT Connectors Customer Support Locations UK Jays Close, Viables Estate Basingstoke, RG22 4BA phone: 44.1256.311200 fax: 44.1256.323356 GERMANY Cannonstrasse 1 Weinstadt, 71384 phone: 49.7151.699.0 fax: 49.7151.699.217 HONG KONG Units 2405-6 24/F, ING Tower 308 Des Voeux Road Central Hong Kong phone: 852.2732.2720 fax: 852.2732.2919 ITALY Corso Europa 41/43 Lainate (MI), Italy 20020 phone: 39.02938721 fax: 39.0293872300 FRANCE 15, Boulevard Robert Thiboust 77700 Serris France phone: 33.1.60.04.93.93 fax: 33.1.60.04.93.90 USA 100 New Wood Road Watertown, CT 06795 phone: 1.860.274.9681 fax: 1.860.274.4963 www.ittcannon.com ©2007 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. VPT-aug-07