Cannon Trident Connectors Ringlock Circular Connectors Standard Plug for Pin Contacts • Mates with Standard Receptacles, see page 30. • Accepts pin contacts, see page 64. • Discriminating (Keying) Pins available, see page 73. • Can be water sealed to IP65. Single Piece Connector Shell Number of Size Contacts Part Number Nomenclature ØA ± 0,20 (.008) 10 4 192922-1250 TR1004PMS1NB 21,60 (.850) 12 8 192922-1260 TR1208PMS1NB 24,80 (.976) 14 12 192922-1270 TR1412PMS1NB 28,00 (1.102) 16 19 192922-1280 TR1619PMS1NB 31,20 (1.228) 18 7 192990-1330 TR1807PMS1NB 34,30 (1.350) 18 23 192990-1320 TR1823PMS1NB 34,30 (1.350) 20 28 192922-1290 TR2028PMS1NB 37,50 (1.476) 22 35 192922-1300 TR2235PMS1NB 40,70 (1.602) 24 48 192990-1340 TR2448PMS1NB 43,90 (1.728) Dimensions B max. ØC ± 0,15 (.005) ØD ± 0,15 (.005) 31,80 (1.252) 10,90 (.429) 12,20 (.480) 31,80 (1.252) 13,80 (.543) 15,10 (.594) 31,80 (1.252) 17,00 (.669) 18,30 (.720) 31,80 (1.252) 19,90 (.783) 21,40 (.842) 33,00 (1.299) 22,50 (.885) 24,00 (.944) 31,80 (1.252) 22,40 (.881) 24,00 (.944) 31,80 (1.252) 25,60 (1.007) 27,10 (1.066) 31,80 (1.252) 28,50 (1.122) 30,40 (1.196) 31,80 (1.252) 31,70 (1.248) 33,50 (1.318) Note: For versions with plastic locking ring, please consult the factory. IMPORTANT NOTE: Standard and Reversed Format Equipment design dictates whether the fixed connector is “live” or “dead” when disconnected. Connector housings are available that provide socket contacts on the live side of the equipment. Standard Format: Receptacle with socket contacts. Reversed Format: Receptacle with pin contacts. Standard and Reversed connectors are not intermateable. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 29 E 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 14,72 ±0,15 (.580 ±.006) Accessory Thread 9/16 - 24 UNEF 11/16 - 24 UNEF 13/16 - 20 UNEF 15/16 - 20 UNEF 11/16 - 18 UNEF 11/16 - 18 UNEF 13/16 - 20 UNEF 15/16 - 18 UNEF 17/16 - 18 UNEF Cannon Trident Connectors Ringlock Circular Connectors Standard Receptacle for Socket Contacts ØJ=Flange in Front of Panel ØH= Flange at Rear of Panel • Mates with Standard Plugs, see page 29. • Accepts socket contacts, see page 64. • Printed circuit contacts are available, see page 64. Dimensions Shell Number of Size Contacts 10 4 12 8 14 12 16 19 18 7 18 23 20 28 22 35 24 48 A B max. ± 0,15 (.005) 25,80 (1.016) 2,30 (.091) 25,80 (1.016) 2,30 (.091) 25,80 (1.016) 2,30 (.091) 25,80 (1.016) 2,30 (.091) 32,50 (1.280) 2,50 (.098) 25,80 (1.016) 2,50 (.098) 33,30 (1.311) 2,50 (.098) 33,30 (1.311) 3,50 (.138) 33,30 (1.311) 3,50 (.138) C ± 0,20 (.007) 11,15 (.439) 11,35 (.447) 11,35 (.447) 11,35 (.447) 18,20 (.716) 11,35 (.447) 14,50 (.571) 14,50 (.571) 15,30 (.602) ØD ± 0,15 (.005) 15,00 (.591) 19,00 (.748) 22,20 (.874) 25,40 (1.000) 28,50 (1.122) 28,50 (1.122) 31,70 (1.248) 34,90 (1.374) 38,05 (1.498) E ± 0,15 (.005) 18,00 (.709) 20,50 (.807) 22,60 (.890) 24,20 (.953) 27,00 (1.063) 26,90 (1.059) 29,20 (1.150) 31,60 (1.244) 34,45 (1.356) F ± 0,25 (.009) 23,50 (.925) 26,20 (1.031) 28,15 (1.108) 30,50 (1.200) 33,30 (1.311) 33,30 (1.311) 36,50 (1.437) 39,70 (1.563) 42,90 (1.689) ØG ± 0,10 (.003) 3,25 (.128) 3,25 (.128) 3,25 (.128) 3,25 (.128) 3,25 (.128) 3,25 (.128) 3,25 (.128) 3,25 (.128) 3,90 (.154) ØH ± 0,10 (.003) 17,30 (.681) 21,80 (.858) 25,00 (.984) 28,10 (1.106) 31,30 (1.232) 31,30 (1.232) 34,50 (1.358) 37,70 (1.484) 40,90 (1.610) ØJ ± 0,10 (.003) 15,10 (.594) 18,20 (.716) 21,40 (.842) 24,60 (.968) 27,80 (1.094) 27,80 (1.094) 30,90 (1.216) 34,10 (1.342) 37,30 (1.468) Accessory Thread 9/16 - 24 UNEF 11/16 - 24 UNEF 13/16 - 20 UNEF 15/16 - 20 UNEF 11/16 - 18 UNEF 11/16 - 18 UNEF 13/16 - 18 UNEF 15/16 - 18 UNEF 17/16 - 18 UNEF Part Numbers-Single Piece Connector Shell Size 10 12 14 16 18 18 20 22 24 Number of Contacts 4 8 12 19 7 23 28 35 48 Unsealed Part Number 192922-1190 192922-1200 192922-1210 192922-1220 192990-1300 192990-1290 192922-1230 192922-1240 192990-1310 Sealed (see important note below) Part Number Nomenclature 192990-1660 TR1004RFH1NB 192990-1670 TR1208RFH1NB 192990-1680 TR1412RFH1NB 192990-1700 TR1619RFH1NB 192990-1690 TR1807RFH1NB 192990-1710 TR1823RFH1NB 192990-1720 TR2028RFH1NB 192990-1730 TR2235RFH1NB 192990-1740 TR2448RFH1NB Nomenclature TR1004RFS1NB TR1208RFS1NB TR1412RFS1NB TR1619RFS1NB TR1807RFS1NB TR1823RFS1NB TR2028RFS1NB TR2235RFS1NB TR2448RFS1NB IMPORTANT NOTE: Sealed Connectors A sealed receptacle has an O-Ring seal that blocks moisture when the plug and receptacle are mated. However, the receptacle is not sealed in an unmated condition. For protection, dust caps are recommended for unmated receptacles, see page 34. Plug connectors using a sealed cable clamp (see page 35) with jacketed cable will meet IP65 when mated to a sealed receptacle. Dimensions shown in mm (inch) Specifications and dimensions subject to change 30 www.ittcannon.com Cannon Trident Connectors Ringlock Circular Connectors Reversed Plug for Socket Contacts • Mates with Reversed Receptacles, see page 32. • Accepts socket contacts, see page 64. • Discriminating (Keying) Pins available, see page 73. • Can be water sealed to IP65. Shell Number of Size Contacts 10 4 12 8 14 12 16 19 18 7 18 23 20 28 22 35 24 48 Single Piece Connector Part Number Nomenclature ØA ± 0,20 (.008) 192926-0500 TR1004PFS1NB 21,60 (.850) 192926-0510 TR1208PFS1NB 24,80 (.976) 192926-0520 TR1412PFS1NB 28,00 (1.102) 192926-0530 TR1619PFS1NB 31,20 (1.228) 192990-1390 TR1807PFS1NB 34,30 (1.350) 192990-1380 TR1823PFS1NB 34,30 (1.350) 192926-0540 TR2028PFS1NB 37,50 (1.476) 192926-0550 TR2235PFS1NB 40,70 (1.602) 192990-1400 TR2448PFS1NB 43,90 (1.728) Note: For versions with plastic locking ring, please consult the factory. IMPORTANT NOTE: Standard and Reversed Format Equipment design dictates whether the fixed connector is “live” or “dead” when disconnected. Connector housings are available that provide socket contacts on the live side of the equipment. Standard Format: Receptacle with socket contacts. Reversed Format: Receptacle with pin contacts. Standard and Reversed connectors are not intermateable. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 31 Dimensions B max. ØC ± 0,15 (.005) ØD ± 0,15 (.005) 26,10 (1.027) 11,00 (.433) 12,20 (.480) 25,60 (1.008) 13,90 (.547) 15,10 (.594) 26,80 (1.055) 17,10 (.673) 18,30 (.720) 27,60 (1.087) 20,00 (.787) 21,40 (.842) 31,50 (1.240) 22,50 (.885) 24,00 (.944) 25,60 (1.088) 22,50 (.885) 24,00 (.944) 31,30 (1.232) 25,70 (1.011) 27,10 (1.066) 31,30 (1.232) 28,60 (1.126) 30,40 (1.196) 31,30 (1.232) 31,80 (1.225) 33,50 (1.318) E 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 19,10 ±0,20 (.751 ±.007) 14,72 ±0,15 (.580 ±.006) Accessory Thread 9/16 - 24 UNEF 11/16 - 24 UNEF 13/16 - 20 UNEF 15/16 - 20 UNEF 1-1/16 - 18 UNEF 1-1/16 - 18 UNEF 1-3/16 - 18 UNEF 1-5/16 - 18 UNEF 1-7/16 - 18 UNEF Cannon Trident Connectors Ringlock Circular Connectors Panel Cutout Reversed Receptacle for Pin Contacts • Mates with Reversed Plugs, see page 31. ØJ = Flange in Front of Panel ØH = Flange at Rear of Panel • Accepts pin contacts, see page 64. • Printed Circuit contacts are available, see page 64. Dimensions Shell Number of Size Contacts 10 4 12 8 14 12 16 19 18 7 18 23 20 28 22 35 24 48 A B max. ±0,15 (.005) 31,50 (1.240) 2,30 (.091) 31,50 (1.240) 2,30 (.091) 31,50 (1.240) 2,30 (.091) 31,50 (1.240) 2,30 (.091) 34,20 (1.346) 2,30 (.091) 31,50 (1.240) 2,50 (.098) 33,00 (1.299) 2,50 (.098) 33,00 (1.299) 3,50 (.138) 34,80 (1.370) 3,50 (.138) C ±0,20 (.007) 11,35 (.447) 11,35 (.447) 11,35 (.447) 11,35 (.447) 17,80 (.700) 11,35 (.447) 14,55 (.573) 14,55 (.573) 15,35 (.604) ØD ±0,15 (.005) 15,00 (.591) 19,00 (.748) 22,20 (.874) 25,40 (1.000) 28,50 (1.122) 28,50 (1.122) 31,70 (1.248) 34,90 (1.374) 38,05 (1.498) E ±0,15 (.005) 18,00 (.709) 20,50 (.807) 22,60 (.890) 24,20 (.953) 27,00 (1.063) 26,90 (1.059) 29,20 (1.150) 31,60 (1.244) 34,45 (1.356) F ØG ±0,25 (.009) ±0,10 (.003) 23,50 (.925) 3,25 (.128) 26,20 (1.031) 3,25 (.128) 28,15 (1.108) 3,25 (.128) 30,50 (1.200) 3,25 (.128) 33,30 (1.311) 3,25 (.128) 33,30 (1.311) 3,25 (.128) 36,50 (1.437) 3,25 (.128) 39,70 (1.563) 3,25 (.128) 42,90 (1.689) 3,90 (.154) ØH ±0,10 (.003) 17,30 (.681) 21,80 (.858) 25,00 (.984) 28,10 (1.106) 31,30 (1.232) 31,30 (1.232) 34,50 (1.358) 37,70 (1.484) 40,90 (1.610) ØJ ±0,10 (.003) 15,10 (.594) 18,20 (.716) 21,40 (.842) 24,60 (.968) 27,80 (1.094) 27,80 (1.094) 30,90 (1.216) 34,10 (1.342) 37,30 (1.468) Accessory Thread 9/16 - 24 UNEF 11/16 - 24 UNEF 13/16 - 20 UNEF 15/16 - 20 UNEF 1-1/16 - 18 UNEF 1-1/16 - 18 UNEF 1-3/16 - 18 UNEF 1-5/16 - 18 UNEF 1-7/16 - 18 UNEF Part Numbers - Single Piece Connector Shell Size 10 12 14 16 18 18 20 22 24 Number of Contacts 4 8 12 19 7 23 28 35 48 Unsealed Part Number 192926-0440 192926-0450 192926-0460 192926-0470 192990-1360 192990-1350 192926-0480 192926-0490 192990-1370 Sealed (see important note below) Part Number Nomenclature 192990-1760 TR1004RMH1NB 192990-1770 TR1208RMH1NB 192990-1780 TR1412RMH1NB 192990-1790 TR1619RMH1NB 192990-1800 TR1807RMH1NB 192990-1810 TR1823RMH1NB 192990-1820 TR2028RMH1NB 192990-1830 TR2235RMH1NB 192990-1840 TR2448RMH1NB Nomenclature TR1004RMS1NB TR1208RMS1NB TR1412RMS1NB TR1619RMS1NB TR1807RMS1NB TR1823RMS1NB TR2028RMS1NB TR2235RMS1NB TR2448RMS1NB IMPORTANT NOTE: Sealed Connectors A sealed receptacle has an O-Ring seal that blocks moisture when the plug and receptacle are mated. However, the receptacle is not sealed in an unmated condition. For protection, dust caps are recommended for unmated receptacles, see page 34. Plug connectors using a sealed cable clamp (see page 35) with jacketed cable will meet IP65 when mated to a sealed receptacle. Dimensions shown in mm (inch) Specifications and dimensions subject to change 32 www.ittcannon.com