Resource

ca_A1-A163.qxd:Layout 1
2/9/11
7:48 PM
Page 1
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 106
MS/CV345*
MIL-C-5015 Rear Release Connectors
Circular
A
Standard Circular High Environmental Connectors
– These connectors are available for many applications, from commercial/industrial and mass transportation systems to the most s stringent high reliability military and space requirements.
The MS/CV345* connector manufactured by ITT
Cannon to MIL-C-5015 (Navy) is a threaded coupling,
removable rear release crimp contact type. Fully intermateable with existing MIL-C-5015 and threaded MILC-83723 Series II (USAF) type connectors, they provide for minimum effort and high economy upgrades
for existing applications. In addition, the offer simplified design for new and interphase equipment.
Features
MS/CV connectors converted under MIL-C-5015 (Navy)
utilize fluid resistant elastomers to provide maximum
protection against degrading fuels, oils, coolants and
cleansers.
Temperature withstanding capabilities range from 55ºC to +200ºC depending upon the class. The use
of electroless nickel and cadmium plating for hardware finishes gives the connectors maximum protection from the above factors. High quality manufacturing processes and materials combine to insure the
optimum performance and materials combine to
insure the optimum range of environmental conditions.
The MS/CV connector manufactured by ITT Cannon is
available in five shell styles and 72 contact arrangements accommodating from 1 to 52 contact (sizes 0,
4, 8, 12, and 16).
This connectors series is manufactured to accommodate the following backshells: M85049/43 (MS3415),
M8504/31 or /60 (MS3416), M85049/52 (MS3417),
M85049/51 (MS 3418) and M85049/26 (MS3419).
Shell polarization is effected by a single keyway and
key, standard MS polarization positions are available
to prevent mismating.
*For information regarding MIL-C-83723 Series II (CVA) connectors, please call ITT Cannon, 714-557-4700
Closed Entry Socket Insert – Hard dielectric socket
face of mating connector has lead-in chamfers for
positive alignment of pins and sockets.
Universal Insertion/Extraction Tool Style – A single,
expendable plastic tool is used for insertion and
extraction of both pins and sockets. Tool never touches engaging ends of contacts, cannot damage insert.
Interfacial Pin Insert Seal – Universal interconnect
permits design of raised moisture barriers around
each pin which mate into lead-in chamfers of hard
face socket insert for individual contact sealing.
Interfacial seal is never touched by service tools.
Simple, Strong Contact Design – One basic configuration eliminates undercuts, maximizes bend resistance for positive contact mating.
Superior Contact Stability – “Closed-down” design
of each contact cavity in the insulator support each
contact, minimizes contact splaying.
Simplified Assembly Operations – One standard procedure for assembling connectors and contacts, standard MS crimp tools, all servicing of contacts accomplished from the rear of the connector.
How to Order
CV
MS
PREFIX
MS - Complies with MIL-C-5015
CV - ITT Cannon Prefix
SHELL STYLES
MS3450 - Wall Mounting Receptacle
MS3451 - Cable Connecting Receptacle
MS3456 - Cable Connecting Plug
MS3459 - Cable Connecting Plug with SelfLocking Coupling Nut
CV3450 - Wall Mounting Receptacle
CV3451 - Cable Connecting Receptacle
CV3452 - Box Mounting Receptacle
CV3456 - Cable Connecting Plug
CV3459 - Cable Connecting Plug with SelfLocking Coupling Nut
CONNECTOR CLASSES
Class KT, KS - Firewall
Class LS - High Temperature,
Fluid Resistant
Class W - General Purpose
SHELL SIZE
See Pages A-108 and A-110
345
345
6
6
W
W
18
18
-
9
9
P
P
W
W
*
PREFIX
SERIES
SHELL STYLE
CONNECTOR CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT SEX
ALTERNATE INSERT POSITION
LESS CONTACTS
CONTACT ARRANGEMENT
See page A-111 and A-112
CONTACT SEX
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
ALTERNATE INSERT POSITION
W, X, Y, and Z (Omit for “Normal”)
LESS CONTACTS
Use “F0” when connectors are ordered less con
tacts, sealing plug and insertion/extraction tool
(“F0” is not stamped on connector).
*Used only when other than power contacts are to
be installed (i. e.,Shielded, thermocouple, ets.)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-106
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 107
MS/CV345*
MIL-C-5015 Rear Release Connectors
Performance Specifications
Class
Temp. ºC
Shell
Material
Size
Finish
Aluminum per
QQ-A-225 or
QQ-A-591
Olive drab over
cad plate
Electroless nickel
Steel per
QQ-S-637
Stainless
Steel
Olive drab over
card plate
Passivate
W
-55 to +175
Yes
L
-55 to +200
Yes
KT
-55 to +175
Yes
KS
LS
-55 to +200
Yes
Steel
Wire Range Accommodations
Contact
Wire
Size
Size
Minimum
16-16
20, 18, 16
.053 (1.35)
12-12
14, 12
.085 (2.16)
8-8
10, 8
.132 (3.35)
4-4
6, 4
.237 (6.02)
0-0
2, 0
.360 (9.14)
NOTE: Resistant to hydraulic fluid per MIL-H-5606 or skydrol (LD), lubricating oils per MIL-L-7808 and MIL-L-23699,
cleaners CeeBee 694 or Aerosafe 2300, jet engine fuel per MIL-J-5624 Grade JP-5, Ethylene Glycol, and Collanol 25.
A
Maximum
.103 (2.62)
.158 (4.01)
.255 (6.48)
.370 (9.40)
.550 (13.97)
Wire Reference - MIL-W16878, MIL-W-22759, Mil- 81381, MIL-C-915,
MIL-C- 24145 and MIL-C 2194.
2 MS3348 brushing required in crimp barrel to accommodate 10, 6 and 2
wire sizes - they are ordered separately, consult factory.
1
Contacts (Crimp Removable Rear Release)
Material - Copper Alloy
Finish - Size 16 - Gold over Nickel
Size 12, 8, 4 and 0 - silver plated
Test Data
High Potential Test Voltage
MS/CV connectors show no evidence of breakdown when the test voltage given below is applied
between the two closes contacts and between, the shell and the contacts closest to the shell for
a period of one minute.
Service
Rating
Inst.
A
Test Voltage
(ms) 60cps
1000
2000
D
E
B
C
Test Current
Test current ratings of contacts and allowable voltage drop
under test conditions when assembled as in service are shown
below. Maximum total current to be carried per connector is the
same as that allowable in wire bundles as specified in MIL-W5088.
Current Rating with Silver Plated Wire
(MIL-C-5015 test method)
Suggested Operating Voltage
DC
AC (ms)
250
200
700
500
2800
3500
4500
7000
1250
1750
2450
4200
900
1250
1750
3000
Contact
Size
16
12
Test Current
(amps)
13
23
Potential Drop
(millivolts)
49
42
8
4
0
46
80
150
26
23
21
*As indicated in previous MS Specification and to be used by the designer only as a guide.
MS Alternate Positions
A
B
A
B
All views are looking into front of pin insert or rear of socket insert.
Normal Position
Shell
Size
No. of
Contacts
Contact
Arr.
W
X
8S
10S
10SL
12
12S
14S
1 #16
1 #16
2 #16
1 #12
2 #16
2 #16
3 #16
4 #16
5 #16
6 #16
2 #16
5 #16
7 #16
2 #12
3 #12
2 #16, 2 #12
2 #16, 1 #8
4 #16
4 #12
3 #16
5 #12
6 #12
5 #16, 2 #12
7 #16, 1 #12
10 #16
8S -1
10S -2
10SL- 4
12 - 5
12S - 3
14S - 9
14S - 7
14S - 2
14S - 5
14S-6
16S - 4
16S - 8
16S -1
16 -11
16 - 10
16 - 9
16 - 7
18 - 4
18 - 10
18 - 22
18 - 11
18 - 12
18 - 9
18 - 8
18 - 1
70
70
70
90
35
80
35
90
35
80
35
70
80
80
70
70
145
145
145
180
110
110
170
110
180
110
110
110
120
145
170
110
145
16S
16
18
Degrees
Y
215
215
215
270
250
265
250
270
250
250
250
240
215
265
250
215
A
B
B
Z
290
290
290
325
280
325
325
280
325
290
280
280
290
290
Position Y
Position X
Position W
Shell
Size
No. of
Contacts
Contact
Arr.
W
X
20
1 #0
4 #12
8 #16
7 #16, 2 #12
14 #16
17 #16
3 #12, 2 #8
6 #16, 3 #12
7 #12
3 #8
4 #8
1 #16, 4 #12
4 #16, 2 #12
8 #16
6 #16, 3 #12
14 #16
19 #16
9 #16, 2 #12
3 #16, 1 #0
4 #8
7#8
6 #12, 3 #8
14 #16, 2 #12
24 #16
20 - 2
20 - 4
20 - 7
20 - 16
20 - 27
20 - 29
20 - 14
20 - 18
20 - 15
22 - 2
22 - 22
22 - 13
22 - 5
22 - 18
22 - 16
22 - 19
22 - 14
24 - 20
24 - 4
24 - 22
24 - 10
24 - 11
24 - 7
24 - 28
45
80
80
35
80
80
35
80
70
35
35
80
80
80
80
80
80
45
80
35
80
80
110
110
110
110
110
110
145
110
110
110
110
110
110
110
110
110
110
110
110
22
24
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A
B
A
A-107
Degrees
Y
250
250
250
250
250
250
215
250
250
250
250
250
250
250
250
250
250
250
250
Z
280
280
325
280
280
325
280
290
325
325
280
280
280
280
280
280
280
325
280
280
Position Z
Shell
Size
No. of
Contacts
Contact
Arr.
W
X
28
6 #16, 6 #12
12 #16
12 #16, 2 #12
15 #16
18 #16, 4 #12
26 #16
35 #16
37 #16
4 #4
12 #16, 2 #4
10 #16, 5 #12
16 #16, 3 #8
2 #12, 2 #4
18 #16, 5 #12
28 #16, 7#12
40 #16, 7 #12
48 #16
4 #0
4 #4, 2 #0
3 #12, 3 #0
46 #16, 1 #12
52 #16
24 #16, 6 #12
28 - 9
28 - 18
28 - 2
28 - 17
28 - 11
28 - 12
28 - 15
28 - 21
32 - 71
32 - 9
32 - 12
32 - 6
80
70
35
80
80
90
80
80
45
80
80
80
110
145
110
110
110
180
110
110
110
110
110
110
250
215
250
250
250
270
250
250
250
250
250
250
280
290
325
280
280
280
280
280
280
280
32 - 13
32 - 7
36 - 7
36 - 10
36 - 5
36 - 6
36 - 3
36 - 8
36 - 52
40 - 1
80
80
80
80
35
70
80
72
65
110
125
110
125
120
110
145
110
144
130
250
235
250
235
240
250
215
250
216
235
280
280
280
280
325
290
280
288
300
32
36
40
Degrees
Y
Z
Circular
Moisture, Fluid and
Fuel Resistant
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 108
MS/CV345*
MIL-C-5015 Rear Release Connectors
Wall Mounting Receptacle
CV3450
MS3450
R
(Typical)
A
L
M
K
Circular
S
(Typical)
T
V
A
Cable Connecting Receptacle
CV3451
MS3451
(Class L and W only)
R1
(Typical)
L
M
K
S1
(Typical)
V
A
L Max.
Shell
Contact
Contact
Size
#16,#12,#8,#4
#0
8S
1.750 (44.45)
-10S
1.750 (44.45)
-10SL
1.750 (44.45)
-12S
1.750 (44.45)
-12
2.100 (53.34)
-14S
1.750 (44.45)
-14
2.100 (53.34)
-16S
1.750 (44.45)
-16
2.100 (53.34)
-18
2.100 (53.34)
-20
2.100 (53.34)
2.250 (57.15)
22
2.100 (53.34)
2.250 (57.15)
K
±.015 (.38)
.053 (2.11)
.053 (2.11)
.053 (2.11)
.053 (2.11)
.053 (2.11)
.053 (2.11)
.053 (2.11)
.053 (2.11)
.053 (2.11)
.125 (3.18)
.125 (3.18)
.125 (3.18)
M
+.031 (.79)
-.000 (.00)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.750 (19.05)
.562 (14.27)
.750 (19.05)
.562 (14.27)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
R
±.005 (.13)
.594 (12.09)
.562 (14.27)
.719 (18.26)
.812 (20.62)
.812 (20.62)
.906 (23.01)
.906 (23.01)
.969 (24.61)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
R1
Max.
.504 (12.20)
.629 (15.98)
.629 (15.98)
.754 (19.15)
.754 (19.15)
.879 (22.23)
.879 (22.23)
1.005 (25.53)
1.005 (25.53)
1.131 (28.73)
1.256 (31.90)
1.381 (35.08)
S
±.031 (7.87)
.875 (22.22)
1.000 (25.40)
1.000 (25.40)
1.094 (27.79)
1.094 (27.79)
1.188 (30.18)
1.188 (30.18)
1.281 (32.54)
1.281 (32.54)
1.375 (34.92)
1.500 (38.10)
1.625 (41.28)
S1
±.031 (7.87)
.729 (18.52)
.854 (21.69)
.854 (21.69)
.974 (24.74)
.974 (24.74)
1.099 (27.91)
1.099 (27.91)
1.224 (31.09)
1.224 (31.09)
1.349 (34.26)
1.474 (37.44)
1.599 (40.61)
24
28
32
36
40
44
48
.125
.125
.125
.125
.125
.125
.125
.812
.812
.875
.875
.875
.875
.875
1.375
1.562
1.750
1.938
2.188
2.357
2.625
1.506
1.756
2.007
2.257
2.511
2.761
3.011
1.750
2.000
2.250
2.500
2.750
3.000
3.250
1.715
1.974
2.224
2.474
2.724
2.974
3.224
2.100
2.100
2.100
2.100
2.100
2.100
2.100
(53.34)
(53.34)
(53.34)
(53.34)
(53.34)
(53.34)
(53.34)
Shell
Size
8S
10S
10SL
12S
12
14S
14
16S
16
2.250
2.250
2.250
2.250
2.250
2.250
2.250
(57.15)
(57.15)
(57.15)
(57.15)
(57.15)
(57.15)
(57.15)
A Thread
Class 2A
1/2-28UNEF
5/8-24UNEF
5/8-24UNEF
3/4-20UNEF
3/4-20UNEF
7/8-20UNEF
7/8-20UNEF
1-20UNEF
1-20UNEF
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
(20.62)
(20.62)
(22.22)
(22.22)
(22.22)
(22.22)
(22.22)
(34.92)
(39.67)
(44.45)
(49.23)
(55.56)
(60.32)
(66.68)
V Thread
Class 2A
1/2-20UNEF
5/8-24UNEF
5/8-24UNEF
3/4-20UNEF
3/4-20UNEF
7/8-20UNEF
7/8-20UNEF
1-20UNEF
1-20UNEF
(38.25)
(44.60)
(50.98)
(57.33)
(63.78)
(70.13)
(76.48)
Shell
Size
18
20
22
24
28
32
36
40
44
48
(44.45)
(50.80)
(57.18)
(63.50)
(69.85)
(76.20)
(82.55)
A Thread
Class 2A
1-1/8-18UNEF
1-1/4-18UNEF
1-3/8-18UNEF
1-1/2-18UNEF
1-3/4-18UNS
2-UNS
2-1/4-16UN
2-1/2-16UN
2-3/4-16UN
3-16UN
(43.56)
(50.14)
(56.18)
(56.36)
(69.19)
(75.54)
(81.89)
T Dia. +.015/-.000 (+.38/-0.00)
Class
Class
L, W, LS
KT, KS
.115 (2.92)
.145 (3.68)
.115 (2.92)
.145 (3.68)
.115 (2.92)
.145 (3.68)
.115 (2.92)
.145 (3.68)
.115 (2.92)
.145 (3.68)
.115 (2.92)
.145 (3.68)
.115 (2.92)
.145 (3.68)
.115 (2.92)
.145 (3.68)
.115 (2.92)
.145 (3.68)
.115 (2.92)
.172 (4.37)
.115 (2.92)
.172 (4.37)
.115 (2.92)
.172 (4.37)
.142
.142
.168
.168
.168
.168
.168
(3.61)
(3.61)
(4.27)
(4.27)
(4.27)
(4.27)
(4.27)
.172
.172
.204
.204
.204
.204
.204
(4.37)
(4.37)
(5.18)
(5.18)
(5.18)
(5.18)
(5.18)
V Thread
Class 2A
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
1-3/4-18UNS
2-UNS
2-1/4-16UN
2-1/2-16UN
2-3/4-16UN
3-16UN
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-108
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 109
MS/CV345*
MIL-C-5015 Rear Release Connectors
Box Mounting Receptacle
CV3452
R
(Typical)
A
L
K
M
G
T
L Max.
Shell
Size
G Dia.
±.016 (0.41)
8S
10S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
44
48
.500 (12.70)
.625 (15.88)
.625 (15.88)
.750 (19.05)
.750 (19.05)
.875 (22.22)
.875 (22.22)
1.000 (25.40)
1.000 (25.40)
1.062 (26.67)
1.187 (30.15)
1.312 (33.32)
1.437 (36.50)
1.750 (45.44)
2.000 (50.80)
2.250 (57.15)
2.500 (63.50)
2.750 (69.85)
3.000 (53.34)
K
±.015 (0.38)
.083
.083
.083
.083
.083
.083
.083
.083
.083
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
(2.11)
(2.11)
(2.11)
(2.11)
(2.11)
(2.11)
(2.11)
(2.11)
(2.11)
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
(3.18)
Contact
#16 & #12
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
.1662
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
(42.21)
Contact
#8, #4, & #0
M
+.031 (.79)
-.000 (.00)
R
±.005 (0.13)
S
±.031 (0.79)
--------1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
1.937 (49.20)
.562 (14.27)
.562 (14.27)
562 (14.27)
562 (14.27)
.750 (19.05)
562 (14.27)
.750 (19.05)
562 (14.27)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.812 (20.62)
.812 (20.62)
.875 (22.22)
.875 (22.22)
.875 (22.22)
.875 (22.22)
.875 (22.22)
.594 (15.09)
.719 (18.26)
.719 (18.26)
.812 (20.62)
.812 (20.62)
.906 (23.01)
.906 (23.01)
.969 (24.61)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.562 (39.67)
1.750 (44.45)
1.938 (49.23)
2.188 (55.58)
2.375 (60.32)
2.625 (66.68)
.875 (22.22)
1.000 (25.40)
1.000 (25.40)
1.094 (27.79)
1.094 (27.79)
1.188 (30.18)
1.188 (30.18)
1.281 (32.54)
1.281 (32.54)
1.375 (34.92)
1.500 (38.10)
1.625 (41.28)
1.750 (44.45)
2.000 (50.80)
2.250 (57.18)
2.500 (63.50)
2.750 (69.85)
3.000 (76.20)
3.250 (82.55)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-109
A
T Dia.
+.015/-.000
(+.38/-0.00)
Class L, W
.115
.115
.115
.115
.115
.115
.115
.115
.115
.115
.115
.115
.142
.142
.168
.168
.168
.168
.168
(2.92)
(2.92)
(2.92)
(2.92)
(2.92)
(2.92)
(2.92)
(2.92)
(2.92)
(2.92)
(2.92)
(2.92)
(3.61)
(3.61)
(4.27)
(4.27)
(4.27)
(4.27)
(4.27)
A Thread
Class 2A
1/2-28UNEF
5/8-24UNEF
5/8-24UNEF
3/4-20UNEF
3/4-20UNEF
7/8-20UNEF
7/8-20UNEF
1-20UNEF
1-20UNEF
1-1/8-18UNEF
1-1/4-18UNEF
1-3/8-18UNEF
1-1/2-18UNEF
1-3/4-18UNS
2-18UNS
2-1/4-16UN
2-1/2-16UN
2-3/4-16UN
3-16UN
Circular
S
(Typical)
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 110
MS/CV345*
MIL-C-5015 Rear Release Connectors
Cable Connecting Plug
MS3456
CV3456
L
MAX.
Circular
A
Q
DIA. MAX.
A
COUPLING NUT
THREAD
L Max.
Shell
Size
8S
10S
10SL
12S
12
14S
14
16S
16
Contact
#16, #12,
#8, #4
1.750
1.750
1.750
1.750
2.100
1.750
2.100
1.750
2.100
L Max.
Contact
#0
(44.45)
(44.45)
(44.45)
(44.45)
(53.34)
(44.45)
(53.34)
(44.45)
(53.34)
-
V THREAD
-
Q Dia. Max.
A Thread
Class 2B
V Thread
Class 2A
.844 (21.44)
.969 (24.61)
.969 (24.61)
1.062 (26.97)
1.062 (26.97)
1.156 (29.36)
1.156 (29.36)
1.250 (31.75)
1.250 (31.75)
1/2-28UNEF
5/8-24UNEF
5/8-24UNEF
3/4-20UNEF
3/4-20UNEF
7/8-20UNEF
7/8-20UNEF
1-20UNEF
1-20UNEF
1/2-20UNEF
5/8-24UNEF
5/8-24UNEF
3/4-20UNEF
3/4-20UNEF
7/8-20UNEF
7/8-20UNEF
1-20UNEF
1-20UNEF
Shell
Size
18
20
22
24
28
32
36
40
Contact
#16, #12,
#8, #4
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
Contact
#0
-2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
Q Dia. Max.
1.344 (34.14)
1.469 (37.31)
1.594 (40.49)
1.719 (43.66)
1.969 (50.01)
2.219 (56.36)
2.469 (62.71)
2.719 (69.06)
A Thread
Class 2B
1-1/8-18UNEF
1-1/4-18UNEF
1-3/8-18UNEF
1-1/2-18UNEF
1-3/4-18UNS
2-18UNS
2-1/4-16UN
2-1/2-16UN
V Thread
Class 2A
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
1-3/4-18UNS
2-18UNS
2-1/4-16UN
2-1/2-16UN
44
48
2.100 (53.34)
2.100 (53.34)
2.250 (57.15)
2.250 (57.15)
2.969 (75.41)
3.219 (81.76)
2-3/4-16UN
3-16UN
2-3/4-16UN
3-16UN
Cable Connecting Plug
MS3459
Self-Locking Coupling Nut
CV3459
L
MAX.
Q
DIA. MAX
GROOVE - ORANGE COLORED
(3 PLACES) (3)
LOCKING INDICATOR
A
COUPLING NUT
THREAD
L Max.
Shell
Size
8S
10S
10SL
12S
12
14S
14
16S
Contact
#16, #12,
#8, #4
1.750
1.750
1.750
1.750
2.100
1.750
2.100
1.750
(44.45)
(44.45)
(44.45)
(44.45)
(53.34)
(44.45)
(53.34)
(44.45)
L Max.
Contact
#0
-
V THREAD
-
Q Dia. Max.
A Thread
Class 2B
V Thread
Class 2A
.963 (24.46)
1.088 (27.64)
1.088 (27.64)
1.213 (30.8)
1.213 (30.8)
1.358 (34.49)
1.358 (34.49)
1.463 (37.16)
1/2-28UNEF
5/8-24UNEF
5/8-24UNEF
3/4-20UNEF
3/4-20UNEF
7/8-20UNEF
7/8-20UNEF
1-20UNEF
1/2-20UNEF
5/8-24UNEF
5/8-24UNEF
3/4-20UNEF
3/4-20UNEF
7/8-20UNEF
7/8-20UNEF
1-20UNEF
Shell
Size
16
18
20
22
24
28
32
36
40
Contact
#16, #12,
#8, #4
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
2.100 (53.34)
Contact
#0
--2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
Q Dia. Max.
1.463 (37.16)
1.588 (40.34)
1.713 (43.51)
1.788 (45.42)
1.963 (49.86)
2.213 (56.21)
2.463 (62.56)
2.713 (68.91)
2.963 (75.26)
A Thread
Class 2B
1-20UNEF
1-1/8-18UNEF
1-1/4-18UNEF
1-3/8-18UNEF
1-1/2-18UNEF
1-3/4-18UNS
2-18UNS
2-1/4-16UN
2-1/2-16UN
V Thread
Class 2A
1-20UNEF
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
1-3/4-18UNS
2-18UNS
2-1/4-16UN
2-1/2-16UN
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-110
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 111
MS/CV345*
MIL-C-5015 Rear Release Connectors
Contact Arrangements
A
Face view, Pin insert
C
AB
8S-1
1 #16
A
10S-2
1 #16
A
E
F
B
A
D C
E
A
D
12S-3
2 #16
A
12-5
1 #12
D
10SL-3
3 #16
A
B
B
C
B
B
A
A
B
C
D
10SL-4
2#16
A
A
A
B A
A
Shell Size
No. of Contacts
14S-2
4 #16
14S-5
5 #16
14S-6
6 #16
16S-4
2 #16
16-11
2 #12
Service Rating
Inst.
Inst.
Inst.
D
A
A
A
C
D
B
C
B
C
16-7
2 #16 (A,B)
1 #8 (C)
A
16-10
3 #12 (A-C)
16-9
2 #16 (B,D)
2 #12 (A,C)
A
B
C
14S-7
3 #16
A
14S-9
2 #16
A
Circular
Shell Size
No. of Contacts
Service Rating
B
B A
A
A
Socket Only
D
E
C
C
EF
D G A
C B
A
B
A
B
D
A
D
A
C
B
C
B
E
D
16S-8
5 #16
16S-1
7 #16
18-22
3 #16
18-4
4 #16
18-10
4 #12
18-11
5 #12
Service Rating
A
A
D
D
A
For new MIL equip.
design, use 18-11
A
G
F
Service Rating
E
18-8
7 #16(A-G)
1 #12(H)
A
C
C
B
C
20-2
1 #0
20-4
4 #12
A (B, C, F, G)
Inst. (all others)
D
D
E
B
18-9
5 #16(B,C,E-G)
2 #12 (A,D)
Inst.
A
For new MIL equip.
design, use 16S-1
F
A
B
A
A
F
F
E
B
E D
C
20-15
7 #12
20-7
8 #16
A
A (C-F)
D (A,B,G,H)
C
G
J
D
H
C
D
20-14
3 #12(C,D,E)
2 #8(A,B)
A
G
B
G
E
D C
G B
A
F
18-12
6 #16
D
18-1
10 #16
A
C
D
B
J
F
C
E
A
D
A
I
G
B
D
Shell Size
No. of Contacts
H
A
H
F
D
B
Shell Size
No. of Contacts
E
E
A
C
H
A
B
20-16
7 #16(A-G)
2 #12(H,I)
A
Pin Only
J
A
J
G H A
F
J
B
M
G
E D C
F
N
T
C
L
K
D
J
B
C
D
P
R
S
C
D
A
C
B
F
A
D
E
B
E
B
C
A
E
Shell Size
No. of Contacts
20-18
6 #16(A,C-E,G,H)
3 #12(B,F,I)
20-27
14 #16
20-29
17 #16
22-2
3 #8
22-22
4 #8
22-13
1 #16(E)
4 #12(A-D)
Service Rating
A
A
A
D
A
A(A-D), D(E)
A
G
F
B
D
G F
H
E
A
A
M
L
B
K
N
H
B
H
C
E
C
D
22-5
4 #16
(A,C,D,F)
2 #12(B,E)
D
22-18
8 #16
A(C-E)
D(all others)
Socket Only
K
A
F
H
G
E
P
H
J
C
D
Shell Size
No. of Contacts
Service Rating
A
22-16
6 #16
(A,B,F,J)
3 #12 (C-E)
A
L M A
B
L
J
B
C
M
D
N
G
F
E
K
J
U
H
R
S
G
F
B
B
P
C
D
D
A
A
C
D
B
G
E
22-19
14 #16
22-14
19 #16
24-4
3 #16 (B,C,D)
1 #0 (A)
A
A
D
A-111
A
B
B
C
E
D
D
C
24-22
4 #8
24-10
7 #8
D
A
G
H
A
J
F
J
24-11
6 #12(A-C,G-I)
3 #8(D-F)
A
B
C
H
G
E
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A
F
C
N
V
T
K
L
F
E
D
24-20
9 #16(A-D,G-L)
2 #12(E-F)
D
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 112
MS/CV345*
MIL-C-5015 Rear Release Connectors
Contact Arrangements
Face view, Pin insert
A
A
L
Circular
N
H
Shell Size
No. of Contacts
E
G F
Service Rating
Inst.
A
L
J
P
H
G
Service Rating
A
C
N
F
Shell Size
No. of Contacts
B
M
C D
B H J K E
G
L
F
R
P
D
U
V
W
M
X
N
E
28-17
15 #16
28-2
12 #16(A,L,N)
2 #12(M,P)
D
J
N
P
K
E
F
G
R
L
S
T
H
M
I
A
B
C
D
E
H
D
F
G
28-18
12 #
A (A,B) C (M)
D (G-L)
Inst. (C-F)
R
A
P
B
S
N
a
T C
b
U D
M Z
d
V E
L Y
X W F
K
J
H G
A
B
C D E FG
H J K L M N
P R S T U V W
X Y Z a b c
d e f g h
j
k
l m
28-12
26 #16
28-15
35 #16
28-21
37 #16
A
A
For MIL equip
design, use 28-21
A
28-11
18 #16(A-I, N-X)
4 #12(J-M)
A
A(A-L), B(R), D(M-P)
C
28-9
6 #16(A,H-M)
6 #12(B-G)
D
24-28
24 #16
24-7
14 #16(A-M,O)
2 #12(P,N)
A
C
D
M
J
F
E
B
K
B
L
M
A
L
A
K
G
E
D
O
I
A B C D
F G H J
K L M N P Q
R S T U V
W X Y Z
C
P
J
J
H
B
M
K
A B
E
C D
G
F
K
L
T
S
a
V
c
b
g
k
r
Z
X
e
d
p
n
R
P
W
j
h
J
H
N
M
U
f
m
s
●
D
A
C
C
B
D
H
32-17
4 #4
Service Rating
D
E
M
C
D
N
F
O
E
G
K
O
K
M
L
K
E
J
H
G
F
J
I
L
Shell Size
No. of Contacts
B
A
B
A
A
A
A
C
B
O
C
C
Service Rating
S
U
D
P Q
V
W X
d
e
h
K
U
d
n
r
C
F
H
L
P
V
Z
e
i
u
x
36-3
3 #12(A,C,E)
3 #0(B,D,F)
36-6
4 #4(B,C,E,F)
2 #0(A,D)
D
A
m
u
h
q
p
n
t
g
v
i
f
k
T
E
D
I
R
a
j
B
S
W
b
f
F
S
L
G
Z
T
M
U
N
B
k
w
v
z
t
g
p
W
m
s
I
Service Rating
A
A
O
J
A
E
M
Y
F
K
U
d
k
u
z
p
w
C
H
P
Z
h
t
y
L
V
e
r
R
a
j
I
N
C
B
E
F
J
V
U
G
d
S
R
X
W
a
Z
L
K
P
O
c
36-52
52 #16
B
C
D
36-8
46 #16(A-X,Z-z)
1 #12(Y)
A
Y
36-10
48 #16
S
36-7
40 #16(A-Z,a-s)
7 #12(t-z)
A
T
Shell Size
No. of Contacts
D
O
T
X
c
b
g
f
m
n
s
v
x
N
c
M
r
s
w x
G
I
T
H
k
A
H
32-7
28 #16(A-N,W-Z,a-k)
7 #12(O-V)
Inst. (A,B,h,j)
A(all others)
N
X
E
K
Y
V
J
M
J
R
b
E
G
P
X
a
g
A
z
y
i
D
D
R S T U
Y Z a b c
f
e
F
A B
C D E F G
H J K L M N
O
d
h
32-13
18 #16(A-D,K-Z)
5 #12(E-J)
D
32-6
16 #16(A-O,S) 2 #12(U,V)
3 #8(P,R,T) 2 #4(W,X)
A
Y
D
C
Z
V
J
R
W
G
E
36-5
4 #10
36-5
4#0
A
V
X
c
B
H
B
E
Y
W
K
A
P
X
L
A
B
N
M
P
F
Shell Size
No. of Contacts
P
W
A
D
I
B
D
H
F
J
N
L M
R
S
T
G
U
N
32-12
10 #16(A-D, F,G,L,N-P)
5 #12(E,H,J,K,M)
A (C-G), D (all others)
32-9
12 #16(C-N)
2 #4(A,B)
D
C
b
e
40-1
24 #16(A-L,T-e)
6 #12(M-S)
D
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-112
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 113
MS/CV345*
MIL-C-5015 Rear Release Connectors
Contacts
Pin, MIL-C-39029/29
Military
Part Number
M39029/29-212
M39029/29-213
M39029/29-214
M39029/29-215
M39029/29-216
1st
Red
Red
Red
Red
Red
Color Bands
2nd
3rd
Brown
Red
Brown
Orange
Brown
Yellow
Brown
Green
Brown
Blue
1st
Red
Red
Red
Red
Red
Red
Color Bands
2nd
Brown
Brown
Brown
Red
Red
Red
Mating
Wire
End
Size
16
12
8
4
0
Barrel
Size
16
12
8
4
0
ITT Cannon
Part Number
980-0009-501
980-0009-502
980-0009-503
980-0009-504
980-0009-505
Socket, MIL-C-39029/30
BIN
Code
217
218
219
220
221
222
Military
Part Number
M39029/30-217
M39029/30-218
M39029/30-219
M39029/30-220
M39029/30-221
M39029/30-222
3rd
Violet
Gray
White
Black
Brown
Red
Mating
Wire
End
Size
16S
16
12
8
4
0
Barrel
Size
16
16
12
8
4
0
ITT Cannon
Part Number
980-0009-495
980-0009-496
980-0009-497
980-0009-498
980-0009-452
980-0009-500
Wire Hole Fillers
Contact
Size
16
12
*8
*4
*0
ITT Cannon
Part
Number
225-0071-000
225-0072-000
225-1009-000
225-1008-000
225-1007-000
Part
Number
MS27488-16-3
MS27488-12-3
MS27488-8-3
MS27488-4-3
MS27488-0-3
Color
Code
Blue
Yellow
Red
Blue
Yellow
* Consult factory for availability
Thermocouple
Alumel
Contact
Size
Pin
Socket
16S* 030-3196-015 031-3113-011
16
030-3196-015 031-3114-014
12
030-3197-011 031-3115-009
Chromel
Pin
030-3196-016
030-3196-016
030-3197-012
Socket
031-3113-012
031-3114-015
031-3115-010
* 16S type socket contacts are for use in 8S, 10S, 10SL, 12S, 14S, and 16S shell size connectors.
Tooling
A complete line of crimp, insertion and extraction tools is provided for MIL-C-5015 connectors. Crimp tools are made from high quality
metal and are designed for long life and trouble-free service. Insertion and extraction tools
are made of a durable plastic and are inexpensive and expendable.
CIET-16
MS No.
16
M8 1969/14-03
274-7002-000
CIET-16-03
-
-
12
M8 1969/14-04
274-7003-000
CIET-12-04
-
-
8
MS3165-8
M83723/32-8
CET 8-2
MS3483-1
CET-CVR-8
4
MS3165-4
M83723/32-4
CET 4-8
MS3483-2
CET-CVR-4
0
MS3165-0
M83723/32-0
CET 0-1
MS3483-3
CET-00-CV
CBT-520/530
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Insertion/Extraction Tools
Plastic
Part Number
ITT Cannon No.
MS No.
Contact
Size
A-113
Metal
ITT Cannon No.
Crimp Tool
Unwired Contact
274-7008-000
M22520/01 with
M22520/1-02 Turret
274-7009-000
CBT 520/530
M22520/1-01
CBT 600B Power Unit CCH-8-1 Crimp Head CCHP-8-6 Locator
CBT 600B Power Unit CCH-4-1 Crimp Head CCHP-4-8 Locator
CBT 600B Power Unit CCH-0-1 Crimp Head CCHP-0-8 Locator
-
A
Circular
BIN
Code
212
213
214
215
216